magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

mykroft

all i did on my asterisk 1.6 is saved the patch in mjpach.txt from the 1st message.

then in /usr/src/asterisk/channels run

patch -l < mjpatch.txt
that is a lower case L not a 1

then backup one dir (cd ..) and run make

only thing it should do is recompile chan_sip into a .o and .so file ...

mykroft

Most stock FreePBX 1.4.x distros do not use the new .lua and and .ael

so just telling someone to remove their extensions.conf will kill their system.

Correct me if I am wrong but isnt the .lua and .ael standard for 1.6.x? and not 1.4.x?

I looked into 4 different 1.4.x distros before writing this ...

mykroft

Correct me if I am wrong. But I think this is fine a normal error. Something they do the first reg is supposed fail Thats sorta how they weed out the rest sorta a trick they did to well I have no idea I am getting the feeling early on when the first workarounds came out that in the wireshark dumps ...

mykroft

I would like to just point out a couple of things that will make your MJ to Asterisk life better.

Use extensions.ael and extensions.lua. Delete extenisons.conf. DON'T USE IT!

Strip your binaries after compile.

Why do all of you make it so hard when it is so simple?

PATCHES? We don't need no ...

mykroft

you have to patch the asterisk source and then recompile it

mykroft

ya, but most CC companies will not let you charge back like a year later etc.

Then its not worth the risk for the amount of the product when they cant guarantee they will be around for the next 5-10 years

Buy with a credit card and if/when they go under, have the Credit Card company refund your ...

mykroft

remember you are starting mjproxy with your user id and password on the command line, not your brothers.....

have to change both, that is why yours works and his does not. when using his, mj is getting confused with his data being passed from the ata, and your data being used in the mjproxy program ...

mykroft

Then its not worth the risk for the amount of the product when they cant guarantee they will be around for the next 5-10 years

Agreed. I'll bet Magicjack is not around in 5 years, either. At least not as we know it now.

True, but look at the cost difference for the hardware - much easier to ...

mykroft

Then its not worth the risk for the amount of the product when they cant guarantee they will be around for the next 5-10 years

mykroft

My question is - is this device locked into them only or if some day they are gone you can configure/hack it to use a different provider/service etc?

mykroft

http://www.phoneservicesupport.com/magi ... t7243.html

here ya go - works fantastic

mykroft

that is why you pay for everything like this with a CC. Most CC companies have no problems issusing chargebacks - some times up to 90 days or more - especially if you say they are not honoring a warrant or TOS. Ask ATT, Sprint and Verizon.

Especially after a company changes the barn without noitce ...

mykroft

On my inbound routes I had to add E and 01 to my DID number, dunno when MJ starting doing this - but it has changed....

mykroft

I will try it when I get home

mykroft

check your dial patterns on BOTH your trunks and outbound routes.

I dont use them on the trunks, i configure mine in the outbound routes so I can pick what trunk I need by how i dial

mykroft

completetech wrote:slightly off topic.... but now for some reason i can not do

areacode+NXXXXXX and have it allow me 7 digit dialing..

any idea?

try 1|areacodeNXXNXXXX

or 1NXXNXXNXXXX

to force a 1 dial?

mykroft

Please never buy magicjack except our official website. We never suggest or recommend buying magicjack from our resellers or other website. We do not provide any guarantee or replacement for the magicjack purchased from anywhere else. If your magicjack stop working or start malfunctioning , then we ...

mykroft

completetech wrote:I guess that from the few hours I had it working the password could have changed. I doubt it though. possible.

at this point I guess it is off to the router proxy add-on in order to get it to work.

check your PM's - I can walk you thru this either via MSN or a MJ call - let me know

mykroft

Running Trixbox here

you will either have to download and patch the source then compile or use the mjproxy program and run it on your server. I just patched my home box and it works great, will patch and change the work box from the mjproxy program tomorrow after my days off.

Best bet is to move ...

mykroft

I am currently running PIAF with MagicJack. You will need the mjproxy daemon running somewhere to do the nonce twirling.

1) Using FreePBX, Set up a trunk for your MJ.

Trunk Name: MagicJack
PEER Details:
username=ENXXNXXXXXX01
type=friend
secret=MJ20CHARACTERPASSWRD
qualify=2000
port=5070
nat ...

mykroft

read up http://www.phoneservicesupport.com/magi ... t3258.html

just updated it my MJ is working inbound/outbound now

mykroft

Try http://www.phoneservicesupport.com/magi ... t3258.html

mykroft

1st post updated - inbound/outbound is now working for me.

Note - you still can not send a Caller ID

mykroft

I will take a look at mine and double check that inbound is still working tonight when I get home from work.

I dont get much inbound on it, mainly outound.

Will post results.

Myk

mykroft

Trixbox works just fine - yes they forked FreePBX, but there is nothing technically wrong with that.

I have a trixbox and a PBXiaf both running this config with no problems.

mykroft

Your sip is not registering...

check your username and password - one of them is incorrect

mykroft

please post and edit out private info of your

sip show registry

from the asterisk cli

mykroft

did you replace <city> with the closest city to you from the list posted?

And use the numerical ip where specified to match what city you used?

mykroft

well,

you can route it like any other voip sip trunk, so if you have other - you can just add it to the group so it will get answered like normal with the others

mykroft

oliverda wrote:I got it dude. I can send calls but i'm not able to receive calls.

also, what is your inbound routing set to?

mykroft

trixbox*CLI> sip show peers
Name/username Host Dyn Nat ACL Port Status
magicjack/Exxxxxxxxxx01 67.88.208.198 N 5070 OK (104 ms)
inbound/Exxxxxxxxxx01 67.88.208.198 N 5070 OK (104 ms)
1000 (Unspecified) D N 0 UNKNOWN
3 sip peers [Monitored: 2 online, 1 offline Unmonitored: 0 online, 0 offline ...

mykroft

I got it dude.:) I can send calls but i'm not able to receive calls.

if your using a host=192.x.x.x address - that is incorrect

host=XXX.XXX.XXX.XXX is the numeric IP of the proxy address you selected

so if you are using a proxy of: proxy1.SaltLakeCity.talk4free.com

your host ip would be 67 ...

mykroft

double post

mykroft

you did not follow instructions above on what to use for the host ip

look again, it does work

mykroft

magicJack's software auto updates itself - so everyone should be running the newest/current version.

mykroft

User agent I was looking into and planing on adding it

Changing the To: fields in the register/invite msgs - not sure how to do that - any hints on where to look?

Myk

I am paying for trunking through Vitelity and use MJ more or less to play around with. After MJ blocked PAI then I pretty much ...

mykroft

question for you mykroft. If I use Trix Box GUI in order to get the PBX working how I wanted to, can I then copy the .conf files over to an asterisk server I have running on a Fonera. I want to have * running in my house but I cant justify running a PC all day long for the limited amount of calls I ...

mykroft

What is the difference of getting Asterisk to with with magicjack vs getting 3rd party softphones working with magicjack. I dont see you hollaring to get those posts removed? My guide is just information on how to get it to work, it does not go about how to crack the magicjack arrount info that is ...

mykroft

No

Forum search is a wonderful tool.....

mykroft

oliverda wrote:This is useless. I give up. I'll use MJ the legal way.

Whats the problem? Its working perfectly for me right now - just spent several hours on the phone via TrixBox > MJ

Myk

mykroft

The PBX manager in TrixBox CE is a GUI editor for all the .conf files and alot more. You can take the above info and plug it is manually by editing the various .conf files (sip.conf, extensions.conf etc) and input the same infomation. It is just 100% easier to use the GUI editor that comes with ...

mykroft

Updated 6/8/2009

DISCLAMER-----Using this guide can get your MJ account terminated – I take no responsibility for what could happen if you use this guide.

This is a guide that will help you configure your magicjack service to work with TrixBox CE 2.6.1.13. Please not that I had alot of help ...

mykroft

Are all of your cables Cat 6e? Gig eth uses all 4 pairs....

mykroft

are you adding the port of 5070 on the end of your registration?

my reg is:

EXXXXXXXXXX01:[email protected]:5070

my trunk incoming settings are:

username=EXXXXXXXXXX01
type=friend
secret=XXXXXXXXXXXXXXXXXXXX
port=5070
nat=yes
insecure=very
host=XX.XX.XX.XX ...

mykroft

ok, I got my creds - but i am not sure how to configure the outbound section of the trunk.

I got the registration and inbound working, but am not sure how to configure the outbound.

I am using TrixBox with FreeBPX doing the editing - I dont want to edit the config files by hand cause I always ...

mykroft

how did you get your MJ password - I am trying to get my asterisk to provision directly without usb dongle...

Thanks
Myk

mykroft

How did you get your password? I am trying to do the same thing...

Myk

magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

Search found 47 matches

MagicJack Setup Guide For TrixBox CE