magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

mjc8870

I am also unable to get it working with new password. I will standby and monitor this site for a solution.

mjc8870

I used magicsipac and got my new password. The username was same but with one exception, it had @talkfree.com at end. Does this need to be changed or just leave Exxxxxxxxxx01. I am still not getting it to register.

I changed password in scripts section of tomato router. Ant suggestions?

Thanks ...

mjc8870

I am in same boat as everyone. I have MJ running via my linksys TMobile router with mj proxy loaded on it. I have been running it like this for over a year.

I guess I need to look for my new password like everyone else has done. The problem is, It's been so long, I forgot how to do this.

Can ...

mjc8870

MJ works perfect through ATA with Tomato software. FYI

mjc8870

I figured it out. I was missing a backslash before JFFS in command.

mjc8870

Whenever I need to reset my router my script does not automatically run. I have to manually put it in putty. Any ideas why this is happening?

mjc8870

It seems I had to manually load mjproxy in the putty program. Thanks, all is working well.

mjc8870

I manually typed command in, and now when I type "top", the command is listed. I will keep you posted if it works. I will wait 3-5 minutes.

mjc8870

This is what I have in my scripts - sleep 30
/jffs/mjproxy 0.0.0.0 5070 proxy01.miami.talk4free.com 5070 my password

Do I need that JFFS. That is what I had previously when it was working.

I appreciate your help. It is probably something simple, most likely operator error.

mjc8870

When you say manually enter command, could you tell me what to enter.

Thanks,

Mike

mjc8870

I am back. Everything was working great until I had to disconnect my router,ATA etc.. today to paint my computer room. I hooked everything back up and it is not working.

I telnet and used the top command, and I do not see MJ proxy command. I then started fresh with the instructions, and once again ...

mjc8870

Guys,

I got it working. I realized I had wrong setting in ATA . I had proxy setting set at 192.168.1.101. It should have been 192.168.1.1.

I appreciate all the help.

Thanks,

Mike

mjc8870

anyone?

mjc8870

I made it through to step 10, and this is the command that shows up in Putty.

/jffs/mjproxy 0.0.0.0 5070 proxy01.miami.talk4free.com 5070 MJpassword

In the tutorial it has same, except no jffs/ before mjproxyxxxxxxxx

I am not getting the line connected. Did I somehow load mj proxy in wrong ...

mjc8870

I think I see my mistake. In step 5, I uploaded to 192.168.1.1, but forgot to add /JFFS. I will try that when I go home and update my progress. Did I have to make a JFFS folder, or by enabling in router it is made automatically?

Thanks

mjc8870

I followed everything step by step. I did install putty. I enables JFFS in the router. I do not know if I have a /JFF2 I don't recall seeing a step to add this, other then in tomato/admin.

I will check when I get home, and uodate this thread.

Thanks for helping.

Mike

mjc8870

I am using Linksys WRT54G-TM and using Tomato 1.27. I have run into a prolem on step number 7. I entered "chmod mjproxy to 755" (no quotes) and it says it can not be found. I am at a loss here, because I have no knowledge of programming linux. It appears that the mjproxy is not loading in router ...

mjc8870

sorry, wrong sticky.

mjc8870

I am using Linksys WRT54G-TM and using Tomato 1.27. I have run into a prolem on step number 7. I entered "chmod mjproxy to 755" (no quotes) and it says it can not be found. I am at a loss here, because I have no knowledge of programming linux. It appears that the mjproxy is not loading in router ...

mjc8870

I have taken your advice and switched to Tomato. I have followed sticky until # 7. I enter chmod mjproxy to 755 and it says it can not be found. I am at a loss here, because I have no knowledge of programming linux. It appears that the mjproxy is not loading in router.

Also it says to Telnet, but ...

mjc8870

I tried loading mjproxy using putty and I get the above error " You probably want to install ipkg update". It appears to start downloading and this message popped up. Does anyone know how to proceed from here?

I have zero knowledge of anything regarding linux. I do believe this is linux correct?

mjc8870

I am having a problem installing mjproxy into router. I have tried as described and not having any luck. Is there any other directions or information to help me load this into router?

Thanks,

Mike

mjc8870

That did it. Thank you so much. Now on to the next steps.

mjc8870

I am following sticky directions, but cannot get past logging in to putty. It is stating login in correct. I am at a loss, due to being a newbie. Can anyone shed some light on what is going wrong.

mjc8870

I am attempting to follow directions to load MJproxy on my wrt54g-tm, and in Putty I am getting login incorrect. I am positive I have the correct credentials for the router, but it gives me login incorrect. I am newbie and have no idea how to proceed.

Any help would be appreciated.

mjc8870

I have MJ working with pap2t-na and running mjproxy on computer. I just got my wrt54g-tm and want to load mj proxy on router so I don't have to have computer on.

I have reviewed the sticky and am admittedly a little clueless. Is their another tutorial to show step by step how to load mjproxy to ...

mjc8870

Any recommendations would be appreciated.

mjc8870

Will this router be ok to load Mj proxy? I have Pap2t-NA working with MJproxy with computer on, and now want to take next step to use with computer off. I was also looking at WRT54GL, but their are many TM's on Ebay with DDWRT already installed. Which router would you recommend to help with this ...

mjc8870

I `am also getting dial tone with busy signal.

mjc8870

Can someone post the pics of settings. I have all of my equipment Pap2t-NA and using MJproxy. I have sip password and ID. I just need to see which settings everyone is using ie....proxy.

Thanks,

Mike

mjc8870

I should add that my x-lite setup only works when running MJDM5.

mjc8870

Thanks to all.

mjc8870

I have been reading the threads and sticky for quite sometime. I have my credentials from password finder and have them working in x-lite. Where I am confused is some say, you do not need to use MJMD5 and others say, you must install this program in the router (DDRT).

I uess the best way to go ...

mjc8870

Mine works great attached to the computer. There is not much difference then landline. Could you PM me or post on here a non technical outline of how you got it running. Which router and ATA do you have?

Thanks,

Mike

mjc8870

I understand it may not work. I am willing to mess around with it. If I can't get it to work, I will subscribe to cheap VOIP service.

mjc8870

I am looking to use MJ with ATA. I just ordered PAP2T-NA and deciding on router. I found wrt54GL on Newegg $ 50 shipped - new. I also see wrt54g-tm 1.1 on ebay for about $ 30 used. It says this is a T mobile already flashed with ddwrt. Is this one ok?

Which one would you suggest ?

Thanks

mjc8870

Is this the only way to use ATA with magicjack. I am looking to do this, but don't have this router or knowledge to do this.

mjc8870

I do have the pw from password finder. I have mj set up on x-lite and I wonder if this interferes with using IPICO?

mjc8870

I tried it with no luck. I tried your video and I am getting no audio. I amlicking for some help with this.

Mike

mjc8870

Yes it works with xlite. I do not have ATA. Jyst follow the info above and you will be fine. If you have any particular questions let me know.

mjc8870

I already have sipsocery account.

mjc8870

My dongle was bought in November of 2008

mjc8870

Can someone get me started so I can use this setup. I am completely new to this and have no knowledge of ruby code. I am looking to use GV and SS with ATA without running computer. I already have a gizmo account as I understand this is needed also.

Thanks for the help.

mjc8870

Thank you so much I got it. Just curious, how is this different then just using magicjack softphone? I still need my computer on right? I guess I could use this from any other computer. Now, is it possible to use these credentials for mobile application (Ex Fring). I actually have a windows mobile ...

mjc8870

reg error 408

Do I use my machine ip 192.168.x.xxx or the 127.xxx.x.xxx. I am still having above error.

Thanks,

Mike

mjc8870

Does this go in Xlite under domain and in proxy in MJMD5? I am already using proxy01.miami.talk4free.com. Do I use the 216.xxx.x.x?

mjc8870

Anyone that may be able to help

mjc8870

I am getting registration error 408. Any other suggestions?

mjc8870

Can someone give me some info on setup with xlite.I received password and username from pw finder but I still get error. Do I need
mjmd5 running? If I do, where can I find this program. As you can see I am newbie to all this. I have been reading board but it seems info is scattered all over.any ...

mjc8870

I am trying also. I am getting password or username incorrect. Is this a dead issue now? I am using google voice + Gizmo on siphon fine, but it only has 3 minute limit. Anyone have this fring
working?

magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

Search found 64 matches

automatically run script

Got it working !!!

Stuck on step # 7

Stuck on step 7

You probably want to install ipkg update

login incorrect in putty

How do I install mjproxy in DDWRT

Wrt54G-TM

Getting started with ATA - WHich hardware

Step by step for GV and Sipsocery help

Xlite setup