magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

Got a T5710 from CL with 256/256mb of flash/memory right after the latest block from MJ to get rid of ATA. Was able to delete a lot of unused files to make it work. Since I have a 4gb hitachi micro drive taken out from my palm lifedrive, after read this thread, bought an adaptor and a cable, the ...

Got my cf2ide card and cable. Connected my 4gb hitachi microdrive. Bios recognized correct size of flash disk. After installed xpe from HP, it would not log in says something like can not accuratel verify something and keeps giving the same message. Went back to check asset tag it was blanked. Made ...

It works with 256/256 after little play around.

http://www.phoneservicesupport.com/t571 ... 10012.html

That was what I did and it works ever since.

Shit Out of Luck?

LOL

You can change it once for free.

As I am sick of MJ's blocking ata, thought this would be of interest who are seriously thinking dump MJ when current commitment is over. Whistle on ATA works very well given the fact it costs nothing if you do not mind listening to 15 sec ad (it seems it is hit or ...

Just got an email from whistle that new area code is available and you can change from previous 401 number once for free. Proved it is true and now you do not have to care about CID anymore.

Thanks for your sticky post at thin client section VaHam, and I have benefited from it a lot along with the enlightings from other smart guys at this forum. To benefit and to contribute is this forum all about.

I happened to have a 4Gb microdrive handy after replaced it with compact flash on my ...

Saw a post using junction to link a usb device for increased storage for post LY updated MJ to work with 256MB thin client. It seems not that easy to me after couple of tries. Even I was able to striped down the XPe to free about 75Mb available space, it was still not able to do the fresh update ...

My username didn't change, my password did. I was unable to find my password using any methods in this thread.

FOR ALL THOSE THAT HAVEN'T BEEN ABLE TO FIND YOUR PASSWORD, THIS METHOD WORKS:

You need to use Sipdump and you must set it to dump 15 logs... (3 or 4 dosen't work anymore). You need to ...

Got my ata up and running. Here are some changes made to the ata
SIP User Agent Name: MagicJack/2.0.562d (SJ Labs).
Had to change Use Auth ID to no (it was working with yes before)

Just tested. It works with xlite + MJMD5. So it is just an update with password change, everything should be back to the way it was.

The password changed. Just use sipdump to capture memory blocks during MJ startup. Timing is critical, when you see ad panel on the left is up start dump (4 or 5 will work). Use Notepad++ (you will be impressed compare to notepad) to search sip.connection.refresh, the password is somewhere close to ...

Have not used the dangler for at least a year and all the sudden, ata failed to register tonight. Have not pluged in it yet. It seems whether it is pluged or not, the password will change, even without an update. Hope it is not the case and ata back to work after a while.

I got the same, ata not registered. Telnet in and run mjproxy can't bind listen address. Wait and see if tomorrow still can not register, may have to plug that damn dangler in to see if pw changed or not, hopefully not.

Problem solved. For some reason, the router failed to run the mjproxy script. Manually ran it through telnet and it is now back to work.

Failed to register ATAs (rtp300, spa2102 and rt31p2). Used to work no problems. Tried plug in the MJ and it worked. Only thing odd was to ask my password before it is usable. Did not seem to update anything. Does anybody have similar experience?

Before switch to MJ, I used Viatalk for two years and was pretty happy, but its renewal issue drove me to MJ. Had not used landline ever since using VOIP service. I do have a prepaid cell phone as a backup. Now, I have been using ata to host MJ service for more than a year. No big issue at all. Call ...

*69 works to return the last call.

After some play around, it seems this setting works.

User 1/2 TAB, Supplementary Service Settings section set Message Waiting: NO

You need to set the ring count at your answer machine to 4 so that it picks up before MJ. There is nothing you need to do on ata box, but if you do not want false voice message waiting prompt on your phone when there is actually no message on your answer machine you need to make sure at
User 1 or 2 ...

Mine worked when put it back on. It is not something wrong on the ata side as far as I can tell as the other boxes worked right after the exchange.

My experience with voice mail prompt was to switch ata boxes. There are 3 boxes in my possession. The rtp300 and rt31p2 were unlocked vonage version and the other is unlocked sunrocket spa2102. The settings are basically the same with voice mail related settings disabled. It seems the problem is ...

Just realized mine stopped working. It was fine this morning as I was checking my seeding on top of the box. Switched to a unlocked RT21P2 and it is back. My spa2101 acted oddly recently, with voice mail reminding kept on and did not go off. It is not a password issue in my situation.

Found links for the two spliters

RJ-11 2-Port Phone Line Splitter
http://www.dealextreme.com/details.dx/sku.22009

RJ11 Phone Cable 1-to-2 Female-Female Spliter Coupler
http://www.dealextreme.com/details.dx/sku.2671

Free shipping and total is $2.68, takes 5-7 business days to deliver.

I tried block caller id per call, did not try block all. Tried call forwarding once with no success. Did not bother to try more, as those features are really not that important to me. Pretty happy with what I have right now.

First of all, go outside and open the box where your dsl gets in. Make sure only dsl pairs connected with the cable from the provider.

Then you will need a spliter to separate line 1 and line 2. By default telephone cable running inside the house has two lines built in. It does not matter if your ...

I used Sipinfo 1.6 beta to pull mine... Did about 5 dumps... My dumps were about 18 megs and if you follow the directions, you should be able to find your sip credentials... On another note, I was able to get my rtp300 working by proxying to mjmd5 on another computer... So it looks like I need to ...

mattny wrote:Hmm nothing eh? Well thanks anyway... guess I'll use a thin client. Hello eBay.

You will have to use a DD-WRT or Tomato capable router to set things up.
Once you get the router, then refer to the sticky posts.

I have tried Block Caller ID per call by dial *81+phone number and it works. The CID shows "restricted" at the receiver's phone. To disable it, just dial *82 and then hang up after few sec. I would assume all the other services may be available by using the code at "Vertical services activation code ...

After digging around in the forum and play back and forth with my RTP300, I finally made it work. You have to use a correct dial plan.

This is what I am using for now:

(*xx|911|<411:18004664411>|[235678]11!|<:1555>[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|<:1>[2-9]xx[2-9]xxxxxxS0)

Make sure there is no line ...

That happened most of time when bandwidth was used by other applications. Closing those programs helped. You may have to set up Qos on your router. It works on my ASUS GL5200GU using tomato firmware, yet still in fine tuning.

First of all, thanks for those smart guys on this forum.

Bought a rtp300 for $5 out of a former Vonage user, unlocked it and hooked it up. Fixed delay of dial tune after poking the nubmer with dial plan modification. Last night while fixing caller id time issue, gave a try on the user panel of the ...