magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

mcbelisle

You can use the ata for localphone.com. I use localphone.com and you can get a local number for .99 a month and .009 outgoing and free incoming calls

mcbelisle

How did you get the router to see the open port of the computer?

mcbelisle

the mjmd5cl program is located on page 1 or 2 of this discussion. it also requires .net 2.0 to run.

the mjmd5 program does not load up at all. the mjmd5cl load up only but they both require .net 2.0

to load .net 2.0 you need to use an external flash drive

mcbelisle

how do i allow the router to see my computer running the program

mcbelisle

ok. the first step is done. i got it working on my laptop with the mjmd5 program. the thin client requires the mjmd5cl program. the other one doesn't

I think i need to make it so that my router can see my computers port. the one running the mjmd5 program. as soon as i can figure that out then it ...

mcbelisle

what are your settings. right now i'm on a laptop with the mjmd5 program and it's not working. i saw that someone tried another computer so i put the settings into the ata and i got failed

mcbelisle

I am trying first on my laptop and i'm not even getting registered with it.

mcbelisle

what proxy server. the only thing that this forum says is to have .net 2.0 and the mjmd5 program. there is no mention of a proxy server anywhere.

mcbelisle

what settings did you use to connect to the mjmd5 program. mine is still not working

mcbelisle

i have t5720. i downloaded the .net 2.0 s discussed earlier on this site

the mjmd5 program by itself does not load. I just got the mjmd5cl program to load. can't seem to connect to it using the examples diagram on page 2

mcbelisle

I want to know how to use the program with the thin client. .net 2.0 does not work with it. i installed it but it does not work.

mcbelisle

i figured this problem out. i had a setting clicked that said to block my number from being passed as in anonymous. they don't let anonymous calls through.

I have the spa2102 and hooked up to sipgate. it hooked up but i can't dial out. i get a fast busy signal. i have all the settings as per ...

mcbelisle

problem is fixed

mcbelisle

my problem is fixed now.

mcbelisle

I have the spa2102 and hooked up to sipgate. it hooked up but i can't dial out. i get a fast busy signal. i have all the settings as per instructions but still get busy signal. i did have it hooked up to gizmo5 but with gizmo5 the sound quality is real bad. also, i can't receive calls from google ...

mcbelisle

i have sipgate and an ata hooked up to it. i can receive calls ok but when i attempt to dial out i get a fast busy signal. i emailed the sipgate people and they haven't got it fixed yet

mcbelisle

I have the linksys spa2102. it has a router built in. this link sells them for $64.95

http://www.888voipstore.com/linksys-spa ... agodci6s3Q

mcbelisle

I believe the solution has been posted a few times.

delete all codecs except for g711

mcbelisle

what are the reasons to stay away from the LA server? i think i'm using that one.

mcbelisle

use the pmdump program that worked for me

mcbelisle

check for viruses. i did a search for that error you said and this came up

http://www.malwarebytes.org/forums/inde ... topic=7742

they mention that line.

mcbelisle

http://www.linksys.com/servlet/Satellit ... siondetail

mcbelisle

i saw that localphone.com has cheaper international rates

mcbelisle

there isn't any. caller id does not work with magicjack either with or without the software. please read the other posts regarding this

mcbelisle

i would recommend for distance calls to use www.localphone.com. magicjack charges 2 cents to call china and localphone.com charges 1 cent.

mcbelisle

i thought i was the only one who experienced that. i had posted a while ago but no one responded about this.

mcbelisle

ok. i did upgrade and it worked. now i need to figure out why there is a 13 second delay before it connects calls after dialing.

mcbelisle

i saw that upgrade also. i'm afraid to upgrade it. it might mess something up. i just connected the 2102 direct to the computer and now i have the login to the device.

aniother thing i have realized now that there is a delay o f about 14 seconds after dialng before calls are connected. does anyone ...

mcbelisle

will this help if i can't fnd the new ip address of the device?

mcbelisle

the ip address changed to 192.168.0.198 when it hooked it to the router now but i can't access that site

mcbelisle

I got the spa2102 up and connected to my router the but now i can't access the setting 192.168.0.1 is inaccessible

mcbelisle

how do i connect this to a wireless router. as soon as i connect it, i loose acccess to the device login. also, there is a 13 second delay after dialing before it connects

mcbelisle

so how come it works for some people without this codec thing?

mcbelisle

thanks alot. that worked perfectly. why weren't we notified earlier about this

mcbelisle

I have this same issue. i requested help with it a while ago but no one responded. i can't seem to get it to work either

mcbelisle

I have one of those and it really works. i like it. have had it for a few years now. might get another one

mcbelisle

that link doesn't work. just points to the main board

mcbelisle

i've got it working except for a little problem. if i call out, the other person can hear me and i can hear them perfectly. however, if someone calls me, i can hear them but they can not hear me. i just don't understand how to fix this. i've used a wifi phone as wel as x-lite and the same thing ...

mcbelisle

my situation is not the same as your but i just realized if i use other software the person cannot hear me but i can hear them fine

mcbelisle

It keeps saying "invalid mjflashdriveletter" and i put the correct info. i use the first one and not the second one. it does work when i put the second one in. i am using windows xp. when i put the second one in it doesn not load any info.

i think this only works with vista. is this correct?

mcbelisle

I found another cheaper long distance website. www.localphone.com

mcbelisle

i have those problems every once in a while. i thought at first that it was mine magicjack. then i tried other numbers and it worked. it is just the 800# sometimes

mcbelisle

why not use www.localphone.com. they have cheaper long distance international rates. to germany is 1.2 cents

http://www.localphone.com/call/germany

their rates are cheaper a lot of places

mcbelisle

i know that every once in a while i have experienced the same thing only with dialing 1-800 #'s like goog-411 etc. i could still call other numbers though not 800#s. this only happens every once in a while but then it gets fixed

mcbelisle

someone told me that you need a server for this to work. i thought you just use the thin client like a regular computer online

mcbelisle

i have tried that before with another number. The thing is, your cell phone realizes that it is not itself and picks up the actual number. one time I had gizmoproject caller spoofing and spoofed my friends cell phone number. i called myself and it picked up as his number. then i called him direct on ...

mcbelisle

I was told by someone that it is a client only and needs to connect to a server to run.

mcbelisle

I'm not sure if this is anything but after I reported that it was working fine, I went outside and went down the street and i couldn't connect. my friends' cellphone who has nextel still can't connect to me. I think it has something to do with the individual cell towers. some towers don't work and ...

mcbelisle

not sure. the last thing i did was call boost mobile and they told me it was not my phone and nothing was done. then yesterday i called my mj number and it went through. don't know if they did anything or not

mcbelisle

Well today I called my mj number from my cellphone and it went through.

magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

Search found 56 matches

ata

sip

firmware

cheaper rates

cheaper long distance

thin client

spoofing cell phone

thin client