magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

If you use the GV callback, you don't need to enable GV in your G5 account for the free 3 minute thing, it will work unlimited because it is considered incoming to G5 service. Also, u might try using "1747" for the G5 number. And make sure the G5 has been added and checked in your phone setup in GV ...

You can head over to www.magicjackhacks.com and get the newest version with username support built in if you want.

I downloaded the pm.exe and pmdump.exe by clicking on the picture of the command window on the site.

According to the directions under the command window picture, I waited until ...

The SIP data doesn't appear to be in the dumps anymore.

Maybe its encrypted now or they changed the way it works.

If it is now encrypted, we are in deep doo-doo. Eventually they will change my password, and I won't be able to use the ATA at all.

MJ is also a backup for me, but I like to keep ...

I updated my magicjack and it is now running:

1.80.499.2 (2009.08.01)

Now the SIPINFO.EXE is not finding the SIP data (the current beta version which searches 3 times, nor the previous released version).

It wouldn't surprise me if MJ intentionally found a way to prevent Stroth's program from ...

...I'm not sure I'm ahead yet as I've spent over $100 on ATA's, $140 on the 2 MJs, $25 on the voip.ms subscription, $500 on thin clients, $40 on a Hawkings Broadband Booster, $40 on another cordless phone, and untold tens of hours debugging and tweaking. But it's all been good.

Realistically, I ...

Any feedback on if this version of the SIP Info works better? I show 99 downloads, but no feedback yet.

It is working for me. The previous version also worked for me with only a 2 second delay setting.

I'm curious, do you always do 3 attempts or do you only do the 2nd and 3rd attempt if the ...

The only thing that I can't verify is that the MJMD5 machine is not on IP address 192.168.193.10. If your machine running MJMD5 is "dynamically obtain IP address", then it could change whenever you reboot.

You don't have to leave the MJ in the dongle. It probably is a bad idea to have it in the dongle. If you can take a screenshot of your LINE 1 page in your router and post it here, we can all look at it to see if you have it set right. It shouldn't matter if your user id is visible, just as long as ...

I have got the outgoing calls working but still cannot seem to keep incoming calls working. They work for a while and then stop. How often does the MJMD5 register with magicjack and is their a way to change it? I am running it on a ddwrt router. All the posts i have seen have said to set the ata ...

Late last night I saw the "timed out" on my account at sipsorcery (looking at the SIP Provider Registration).

Still has the same problem today.

I am back to using my PC with MJMD5 running, and it is working.

I guess it is too easy for MagicJack to detect that all those calls were coming from ...

Here is a simple outbound call dial plan....

http://www.mysipswitch.com/forum/viewtopic.php?t=1477

Thanks for the good example of an outbound dial plan. Everything is now working for me with my ATA. This solution is ideal, as I no longer need to run the MJMD5 proxy on my PC. SipSorcery.com now ...

Everything is looking healthy, except that I also get a fast busy on dialing out. I set everything up per the first post. I think maybe the "SIP port" in the ATA needs a different setting? I tried 5070 and 5060, but still fast busy on dial out.

We're close.

It was the outgoing dial plan ...

ditto (wondabwoy).

ATA Registers.

Dialing out gives fast busy.

Incoming works!


For those that say it works, r u sure that OUTGOING works as well??

Synchron 8)

Everything is looking healthy, except that I also get a fast busy on dialing out. I set everything up per the first post. I think ...

pagemen

Looks like you have a winner. I set NAT Mapping Enable to NO. In the NAT Keep Alive Dest, I changed $PROXY to my actual proxy and now I can call MJ from my landline. I did not do any router port forwarding.
OTC

You shouldn't need to do any port forwarding, because you've given the ATA ...

Do you happen to know if it is wise to plug in the magicJack dongle once in awhile or does that make any difference?

If you can't get a dial tone or something else is wrong with magicJack, then the most likely cause is that your password changed (or heaven forbid, another MJ software update ...

Initially, I didn't catch your line about having a working ATA prior to the upgrade (I didn't). But, I now have things working on my wife's PC.

Since I didn't have a working ATA, I kind of winged it and did have to put my user ID in the ATA field, because it kept on saying "offline", but once I ...

This works!! Here is what I did to get it to work, and also run it as a service (Windows XP SP3). Prerequisite: you had a working ATA prior to the June 9th upgrade...as I'm assuming you had your ATA properly configured and you know how to perform the steps below:

1) I downloaded the MJMD5.zip file ...

If it were just a blacklisted set of numbers, then my number wouldn't work with the dongle. But it does work with the dongle.

So it is something else.

I successfully upgraded my software using the dongle. I saw that the password changed, as well as my proxy (they added "proxy01" instead of "proxy1"). MJsuite v1.6 works just fine for me to grab my SIP credentials.

I updated my ATA (WRTP54G), got it to register, can receive calls, but all outgoing ...

Here is all the firmware:

http://oldwiki.openwrt.org/OpenWrtDocs( ... TP54G.html

Try firmware 3.1.27. Here is the link:

http://vap.earthlink.net/upgrade/wrtp54 ... 3.1.27.img

Also, make sure your LINE 1 proxy has the ":5070" at the end:

proxy1.<city>.talk4free.com:5070

You would need a utility to get your SIP credentials. Search ths forum for "Stroths MJ Utilities". One of the functions is "Get SIP credentials". It will make a text file of your MJ credentials (one of them is the user agent name).

ViaTalk doesn't care if you access them from an SJPhone softphone, but MJ does expect you to, so you get to decide whether to put the SJPhone label into that field.

Which field? "SIP User Agent Name" or "SIP Reg User Agent Name"?

So far MJ has been working fine. I hardly use it though, except ...

My PAP2 has it listed on the SIP tab.
YMMV

Crack

Aha! If it is in the SIP page, then it is independent of LINE 1 and LINE 2. I have "$VERSION" in the "SIP User Agent Name", and the "SIP Reg User Agent Name" is empty.

I am using LINE 1 with ViaTalk, and LINE 2 with MagicJack. I don't want to put ...

I don't see any "User Agent" field in the advanced view of my Linksys WRTP54G router. This is using the 3.1.27 firmware that is basically the SIPURA interface.

I've had MagicJack running continuously through my router for over 2 weekswith no problems. I don't expect they will change my User ID or ...

semicharm: You still have a few lingering "All Users" in your main post of this topic. They need to be changed to "LocalService".

I also had a problem with InstallMJService.bat, it contains a stray <echo "%nocopy%"> in the middle which screws things up.