magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

Have had no dial tone since MJ changed my password. I extracted the new password using MJ suite and pasted it into my ATA along with the new SIP Reg User Agent Name.

The ATA fails registration and I've been searching for an answer for about a week now. Any ideas?

Siemens Gigaset 4200 I had on the shelf tested great on both MJ dongle or an SPA-2012 ATA

roddy

I stumbeld upon the answer by trial and error. 'Enable WAN Web Server' was set to no. It is now set to yes and can access SPA through my WAN. Thanks again bro!

roddy

Route|Status|System Status my current ip is set to 192.168.1.100. Neither that numer nor the 192.168.1.104 I just tried work.
I believe the SPA is set to DHCP (if that makes any diffrence)
Isn't current ip the address I should be using?

Hey gang, I can now make phone calls using my SPA 2012 (thanks to mberlant). However I am having trouble connecting to it using the WAN port.

I have no problem connecting through the LAN(ethernet port) + laptop using http://192.168.0.1/advanced. My physical configuration is as follows;

Cable modem ...

Thanks for all your help!

Well the SPA must have needed some time to register because I just tried it again and everything works fine

Although the SPA seems to be working fine with MJ settings, does the STUN Server info and Proxy info i'm using look ok?

Ok, I have a dialtone and first three lights are green on the SPA but after dialing a number the phone just hangs there. I have a feeling it might have something to do with proxy settings in Voice|Settings.

MJ Utilities gives me this info;

Here is your SIP Information as of 7:52 AM on Wednesday ...

Done some reading and i'm still a little confused about the STUN service. please explain what this is and how to obtain the proper information.

**edit** I found a post from mid March where you said you were using stun.ekiga.net:3478. I googled and found out more at voip-info.org;

STUN (Simple ...

Here is a scrren cap of ipconfig;



Another of my Router|Status;




If I understand correctly there should be no problem with these DCHP addresses?

"Enable Web Admin Access" was already enabled.

With my laptop wireless adapters disabled (for testing purposes) I am able to connect to http://192.168.0.1/advanced with ethernet cable plugged into the LAN(etehernet) port on SPA. With the SPA WAN(internet) port plugged into broadband router (which ...

mb, the 2012 is hooked from the ethernet port to the laptop only when configuring. I cannot make any configuration changes in any of my physical configurations.

The physical configs I've tried are;

a) Cabel modem to 2012
b) Cable modem to broadband router to 2012
c) Cable modem to Linksys Wireless ...

I've updated my sp2-2102 to the latest firmware and entered the information as per Kumars post, editing in my own personal info obtained by MJ Utilites Suite.

A couple of problems i have are;

1) Whenever i plug an ethernet cable into the ethernet port of the spa2102 to my laptop I loose my ...