magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

JFMuggs

I am able to get things working with the GV/G5/SS setup.
.
.
.
I had to get a new 747 number from G5 and now it works great!
I don't think the new 747 number was necessary. Aaron found a bug in his sys.GoogleVoiceCall function that was causing about 50% of the people to have problems. It wasn't a ...

JFMuggs

aaronkephart wrote:I figured out the SIP Phone...and the major issue with it all. Now that its all figured out, life is good!!!!

Now I'm bored!

Congratulations.

Now go play with SIPSorcery and Ruby dialplans. That'll keep you busy for a while.

JFMuggs

Cablespider wrote:Now, I can dial out but not in. When calling my GV #, it goes to VM. Google history sees the call but the phone won't ring.

Are you sure SS has a SIP registration with Gizmo5 and you don't have any forwarding in effect at Gizmo5?

JFMuggs

I have the Accton sip phone and was wondering if its possible to use GVout with it........I have everything working properly, even the program, and the phone connects perfectly. However, it dials out just as if GVOut was not running and also with a 3 minute limit. (With Gizmo)
If you can place 3 ...

JFMuggs

I tried this but I'm as soon as I looked at my Gizmo history, I saw this:

Date (GMT) Number Rate/min Duration Price
12 August, 05:42 PM +1-219-xxx-xxxx $0.0190 00:01 $0.019
12 August, 05:41 PM +1-219-xxx-xxxx $0.0190 00:01 $0.019

I was calling my cell to test. Is this normal?
Your SS dialplan ...

JFMuggs

I tried all 3 of the OUTBOUND dial strings below and only the 3rd one works. Can someone point out what's wrong with the first two strings?
It appears about 50% of the Sipsorcery users are having success with Google Voice and the other 50% are not. If I understand these dialplans correctly, your ...

JFMuggs

I'm looking at all this and am just confused. :(
It's actually very simple to get GVOut working so that you can make outgoing and receive incoming calls with your Google Voice account:

1. Configure your SIP client (ATA, hardphone, or softphone) to work with Gizmo5. Make sure you can place calls ...

JFMuggs

Today "*" call to G5 doesn't work any more on my PAP2T, complete silence. GVOut works fine.
Unless you've changed your dialplan, you need to use a leading '#' to specify calls are to be routed through Gizmo5 instead of Google Voice. A leading '*' is used to specify calls are to be routed through ...

JFMuggs

This leads me to believe something messed up in GVOut. I am using the latest GVOut executable dated 8/5/09.
GVOut properties should say version: 1.1.2.0

What you're experiencing is what we all see when running a SIP port other than 5060, but you're the first one that I'm aware of to see it on ...

JFMuggs

jay235,

At first glance, your configuration looks reasonable.

If you remove the outbound proxy from X-Lite, does it work perfectly with SipGate (incoming and outgoing)?

JFMuggs

I am using port 5060. So not sure why I am encountering this issue.

When I try a port other than 5060, I cannot get the softphone to register.
I believe you're the first to report having any problems related to this bug when using port 5060. I and many others have no problem using X-Lite with ...

JFMuggs

how could I use my SIP phone with Gizmo5 and GV, with this program?

I tried inputting my number and proxy in, however, I never got a call, I tried to dial out and the call went through without the busy tone or anything.
You MUST get your SIP phone working normally with Gizmo5 before attempting to ...

JFMuggs

The problem is (and this may be with using x-lite) that after placing or receiving one call, the GVOut doesn't sync (or ack) of the termination of the call. I have to restart GVOut and x-lite to be able to place another call.
This is a bug in GVOut but the the author hasn't yet responded. Are you ...

JFMuggs

I am using the x-lite softphone with sipgate and GVOut to test if this works for me before purchasing the ATA.

.
.
.

If someone has used this configuration, let me know what you did to get it working.
Try these changes:

X-lite:

Proxy Address: sipgate.com

Outbound Proxy: localhost

GVOut ...

JFMuggs

I do apologize for all the wrong info but it was not intentional.
I hope you don't feel I was accusing you of intentionally posting wrong information. My only desire is to see correct information imparted so that others don't go down the wrong path when they're trying to resolve a problem.

<411 ...

JFMuggs

Josemiami wrote:Also make sure to include the port 506 in the SIP call address.
Code: Select all
[2-9]xx[2-9]xxxxxx<:@192.168.169.105:5060>|

You only need to explicitly include a SIP port if you're using something other than the default 5060.

JFMuggs

Yes I realize you can have a GV number register with with a non Gmail account, but you can always log in into your GV account setup with a gmail without using the @gmail, I have tried with all my GV voice Gmail accounts and thy will all work fine no need to enter @gmail. Just the user name will do ...

JFMuggs

I dmz'd the ata device and got audio back, will see if this lasts
Audio problems are almost always the result of router/routing issues (GVOut doesn't get involved in the audio side of things). The fact that using a DMZ fixed your problem pretty much confirms it in your case.

DMZ is overkill and ...

JFMuggs

@JFMuggs

Your dialplan, which did not work yesterday, works just fine today without any correction, weird. I can call out using GVOut/G5, or dialing "#" and a phone number, I can call out using G5's 3 free minutes.

The next thing I'd like to accomplish is to get an ability to call out on the same ...

JFMuggs

Here is some screen shots, please give feedback as I am lost now at how to get things working continuously.
1. Line Enable must be set to yes.

2. Outbound Proxy must be left blank.

3. Use Outbound Proxy and Use OB Proxy In Dialog must be set to no.

4. Use Auth ID and Auth ID probably aren't ...

JFMuggs

1. In yout GVout setup just put the user name not @email, of your GV account.
My Google Voice account username is an email address. If I don't use that whole email address as the username in GVOut, I don't get a Google Voice callback. You MAY get away with leaving the @domain off if your username ...

JFMuggs

Did gizmo5 terminate even the 3 min dialing support? I am using the dial plan below and when I dial # + 10 digit number, I get gizmo's sorry message asking to buy gizmo credit

(<411:18004664411>S0 |<:1>747xxxxxxxS0 |1747xxxxxxxS0 |<:1>800[2-9]xxxxxxS0 |1800[2-9]xxxxxxS0 |<:1>888[2-9]xxxxxxS0 |1888 ...

JFMuggs

just set this up with eyeBeam and GVOut, but I'm having a problem.. it seems that i can only place one call, then any other calls i try placing/receiving dont go through. i have to shut down eyeBeam + GVOut, open them again, then i can place another call.

any idea what im doing wrong?
Are you ...

JFMuggs

az1324,

The problem with GVOut failing on ports other than 5060 appears to be related to it receiving an unexpected SIP cancel.

When using port 5060, SIP cancel's only show up in the debug display when 'Use Busy Signal' is NOT checked:

Starting Proxy on port 5060
Client connection from 192.168.1 ...

JFMuggs

Are you trying to use another port with the dialplan method or as a proxy? Because you can't choose another port and then use it as a proxy unless the SIP server will allow you to connect on that port. With the dialplan method it should work on a different port.
With GVOut out of the loop, proxy01 ...

JFMuggs

fixup wrote:If I use a port other than 5060 (e.g. 5061), then GVOut freezes after a call or two. If I don't use busy signal, then it is fine but difficult to use this utility.

I can reproduce the problem here also. Using port 5062, GVOut works one time only and must be restarted.

JFMuggs

I tried your dialplan, made the necessary changes, and it does not work either, complete silence after placing a call (GVOut works fine with most plans).

In my understanding this plan allows you to override sipbroker with <#:> and call out using GVOut/G5 callback for free? Am I right?
If I'm not ...

JFMuggs

In order for you to make your 3 min free calling using G5, you have to register your GV with G5 and give them your user account and your GV password which I will never recommend for the 3 min free calling, that will give them the right to get your money from your GV account if you got any and if ...

JFMuggs

Regard to the above qoutes: in my understanding in PAP2T on one line you can use one proxy only. So the idea to use GVOut on demand is great, but after GVOut stop runing you can place free 3 min call thru G5 only, not to any other provider.

I was not able to implement this (GVOut on - callback ...

JFMuggs

Josemiami wrote:
Code: Select all
1747[2-9]xxxxxxS0

Gizmo5 numbers are allocated with 17470xxxxxx and 17471xxxxxx. You need to drop the [2-9] qualifier on this term.

JFMuggs

Josemiami wrote:That happen to me when I try to run a soft phone, and a PAP2T in the same computer Im running the GVout Router.

You can't have two SIP clients (softphone + PAP2) both trying to register with the same account on port 5060 at the same time.

JFMuggs

When I dial out (10 digit), I immediately get busy signal. I hang up, after a few seconds, phone rings, when I pick it up, after a few seconds I hear a fast batch of fast busy signals. In the meantime, the other side rings and answers. Both sides can't hear each other.

Any solutions to this? I ...

JFMuggs

After doing some googlin' it appears that Windows 7 does come with .NET preinstalled. Well, if it does, it can't be removed as it doesn't show up in the installed programs area in order to be able to uninstall it.

Edit: Upon further investigation, it does appear that every version of .NET *is* pre ...

JFMuggs

I just ran GVOut on a freshly installed copy of Windows 7 Ultimate and it worked prefectly. Unless Microsoft is pre-installing .NET framework with Windows 7, it's not required.

JFMuggs

doohickey wrote:Before I spend the next 60 minutes or so listening to my old PIII's hard drive choking on a .NET 3.5 install, can someone please confirm that NET 3.5 is indeed required by GVOut.

Why don't you just run GVOut and see if it complains?

JFMuggs

Is it necessary to specify the Gizmo 5 username (1747XXXXXXX) in the Authentication ID field of your ATA sip credentials? Do you need to be logged on to your G5 account online?
My 'Auth ID' is blank and 'Use Auth ID' is set to no in my PAP2. I have 'Proxy' set to proxy01.sipphone.com and 'Register ...

JFMuggs

I tried putting the Local Host into the outbound proxy of the Soft Phone like you suggested before and it does work nicely, this will allow me to change networks wile I'm traveling withot having to input my Computer IP address every time, thank you for the tip.
Yes, if you're going to use a ...

JFMuggs

The program can do a search for your local IP address.

Local IP = "Z"
You dial 3055551212.

The program will dial 3055551212@'Z'

In this case 'Z' will be a variable.
If you don't put '@GVOut's_ip_address' in the PAP2's dial plan (or as part of the number dialled in Express Talk when you haven't ...

JFMuggs

Express Talk soft Phone setup for GVOut and Gizmo5.
Unless Express Talk (or any other softphone or ATA) has the ability to specify an outbound proxy server for INVITE requests in the dial plan like the PAP2 does, you're pretty much forced to set the Outbound Proxy to 'GVOut's_ip_address' unless ...

JFMuggs

It will be a good addition to GVOut, if the program automatically detect your local IP address and ad it to the number you are dialing, so you don't need to put it in your dial plan, and you will be able to dial from any wifi connection using a SIP Phone or ATA without having to worry about your ...

JFMuggs

I am going to try and play a little more with SDP and RTP streams when I get some time in the next week or so. After that if nobody has done it already I might build a router version. *PLEASE* include a version that runs on Tomato firmware (current version is 1.25). Having GVOut do it's magic from ...

JFMuggs

I added the program to the startup folder, and it starts when windows starts, however, all of the settings are blank, and need to be entered again. How can I avoid this? Also, how do I set it to start minimized?
There's a checkbox on GVOut called 'Save Settings' that, if checked, creates a GVOut ...

JFMuggs

How do I run GVOut as a service, so that it will start automatically every time the computer boots up?
There are ultilites that will allow virtually any program to be run as a service, but all you really need to do is make a shortcut to GVOut in your Start -> Programs -> Startup folder. Set its ...

JFMuggs

Josemiami wrote:the dial plan will not fit my purpose because I used to dial 10 digits numbers all the time, here in Miami we have two different area call that I call all the time, I don't make long distances calls.

The dial plan I posted handles 10-digit numbers (or 11-digits with a leading 1) just fine.

JFMuggs

Josemiami wrote:Just tested Version 1.1.2.0 and it does not work for me

Try using the examples/suggestions I just posted.

JFMuggs

anant wrote:I have tested your dial plan. It is working with or without 1 in the front.

You should also be able to dial local numbers (i.e ones in the area code you used in place of aaa in the dial plan) by simply dialing the 7-digit number. The PAP2 will add the 1 + area code for you.

JFMuggs

With the latest version that az1324 posted, things have changed considerably for the better (for PAP2 users at least) since the first release. I now agree with lj's earlier post that no Outbound Proxy should be used. This allows incoming calls to continue to work even if GVOut is not running (GVOut ...

JFMuggs

Ok new version that will prevent it from detecting the server as the client. Sorry about that. This should let people use the dialplan method if they want.

Please try not to post quoted links or mirrored files so that the latest version can be always in the first post and no confusion.

to cut ...

JFMuggs

I have changed the dial plan with the suggested change , It is working.
Here's the previous dial plan I suggested if you'd like 7, 10, or 11 digit US/Canada calling plus international calling if you're NOT using an Outbound Proxy server:

(<411:[email protected]>S0 |<:1aaa>[2-9]xxxxxx ...

JFMuggs

anant wrote:This the dial plan in my PAP2T

(<411:18004664411>S0 |911!|[2-9]xx[2-9]xxxxxx<:@192.168.16.XXX:5060|011!)

You're missing a trailing '>'. It should be:

Code: Select all

<:@192.168.16.XXX:5060>

magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

Search found 74 matches

Re: Okay, Finally.

Re: It works, sorta...

Re: So...how do I use my SIP Phone with this program?

Re: GV+SIPGATE+X-LITE+GVOut

Re: Need help testing X-lite - Sipgate - GV - GVOut

Re: dial plan not using outbound proxy server

Re: dial plan change