magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

So my MJ no longer works on my asterisk, so I thought of connecting it a different way.

Windows7 box with MJ on USB -> ATA -> network -> Asterisk as extension/Trunk

Would this work, and if so, what ATA should I get? An FXS or FXO?

Make / Model would be appreciated also if possible,

my MJ is also no longer working on my Asterisk.

i had to power down my server, and move it... Powered it back on and the mj trunk now shows registered and calls are working.... Oddd....

Shit! No more mj... Sucks!

Hmmm... all of a sudden, my magicjack is no longer working.

Peer in asterisk shows:
207.155.164.198 N 5070 UNREACHABLE

It's pointing to proxy1.denver.talk4free.com

I'm using the patched chan_sip.so

anyone have this issue?

The file itself has not changed since this was setup back in april 2010

thats what i did in the end. although i saved the chan_sip.so and reinstalled trixbox, then copied over the chan sip file. all is good, althout on 4out of 5 calls, the call does not come in, but not a problem, as this will mostly be used for outbound.

what i did was;
./configure
make
make install

this copied the chan_sip to the location

now, how to make inbound calls working as per the logs shiwn above its not routing calls to the extenstion i have it going to inthe inbound route

Looks like by doing this, I screwed up my trixbox install and ...

what i did was;
./configure
make
make install

this copied the chan_sip to the location

now, how to make inbound calls working as per the logs shiwn above its not routing calls to the extenstion i have it going to inthe inbound route

ok, even though not being a Linux Guru and knowing a litle about asterisk, I was able to download the 1.6.0.10 source of asterisk, put it in /usr/src/asterisk-1.6.0.10 and patch the chan_sip.c with the patch on this first topic.

After fidling around a litle, well.... actually after a few hours, i ...

ok, i have a brandnew install of trixbix ce and updated. i then downloadee the source for the asterisk version which is 1.6.0.10

i patched the channel/chan_sip.c with code on the first page of this topic.

now what do i do from here? is there a way to compile just that file chan_sip.c and then ...

all depend on the platform you using. it can be done with asterisk. search the forum

you will need your mj credentials first

thats the only difference between the 2 test both using the same xlite client. 1 with mjmd5 the other with mjproxy

does anyone know how to change the user agent value that goes out when usin mjproxy? i compiled from source bu the user agent comes up as the xlite agent im using, so mj wont respond as it does not have the correct user-agent value.

is there a new source of code for mjproxy that changes the ...

MJPROXY does work on Linux you need to compile it and make sure you are not using the tomato version of it. My article gives a direct link to a working copy you have to extract it and compile it.

ok i got it recompiled and it seems to work but 3cx is not saying th provider is up. 3cx says 503 ...

you have to understand that porting is not an easy thing to do even for a Voip carrier. There's alot involved and charges aswell. I work for a Voip carrier and hear nightmares about the porting. You need a whole departement just for that purpose.

Is twinkle a Proxy?

I'm trying to find a version of mjproxy that works on debian as my DNS323 runs a Debian os.

I use 3cx as a home pbx, and would like to get mjproxy on my dns323 instead of having it on the same server that 3cx works on. That works fine, but i dont want mjproxy on that box, i ...

anyone?

what is this supose to be?

Does anyone know if mjproxy will work on Debian based Linux OS?

Thanks

Maybe in the near future that was a sponsored project to do this one. So if any one want to donate a new jack or anything we can get a cracking on creating one for the 3cx.

I was able to get it working on my 3CX install with MJMD5.

My issue is I dont want 3CX to run the proxy. I have a DNS323 ...

You should do one write up for 3cx

This is odd, I was able to get this working at home with mjproxy running on my WRT610N Router and setup Xlite to point to it, but here at work, i'm using MJMD5 with Xlite on the same system, and keep getting a 408 timed out. I need nothing comming out of the interface on Wireshark.

OK, i finally ...

OK, i finally was able to capture my password with my new MJ. Pretty easy when your told the correct procedure.

Outbound calls using MJPROXY on my DD-WRT setup WRT610n router, and xlite works fine. Although inbound does not.

Will be doing some testing here at work as this is what I do for work. I ...

im in the same boat. But i have a SPA-3102 and will try to setup the MJ via the FXO on my 3102 and see if that works.

anyone?

Is it possible, today, to setup an SPA3102's FXO port connected to the RG11 on MJ and use it for outbound calling?

The most current and detailed set of instructions on how to obtain your SIP credentials can be located at the following links posted below for both the Windows and Mac platforms.

Windowos: http://magicjackhacks.com/index.php?option=com_content&view=article&id=76:how-to-get-the-password-via-windows ...

so which software if any do people use to get the MJ proxy, username and password?

Thats what i want to do

do you mind on posting how you got that working?

Are you connecting the MJ to the SPA-3102?

Ok, but how is the SPA-3102 configured to use the magicjack?

And can I use 3CX to utilize the SPA-3102 as a outbound trunk and have it going through MJ ?

Ok, im picking up a MJ tonight after work, and would liek to know what Type of ATA I need. FXO or FXS to hook up to the MJ Dongle and use it as a trunk on 3CX.

I have a SPA-3102 which hooks up to my house phone wiring and for the sets and the CO pots line comming in.

I want to get a MJ in order to ...