magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

I replaced the standard phone line going to the fax machine with a modular line cord (6-conductor). Send and receive both work flawlessly now. While I don't doubt your results, I find it hard to find the logic in this fix since the MJ itself is only a 2-conductor???
Can anyone come up with an ...

MJ servers not set to eastern daylight savings time

My phone system auto updates the time and date with each incoming call.

The phone system was not updating correctly since the change to EDST Sunday, so I updated manually.

BUT, the incoming calls keep setting my phone clock back 1 hour ...

msiam wrote:Just for chits&giggles, try a # after diling the number, I don't know why and I'm no guru, but I have had the problem of not completing a call and the # somehow signals the line that you are finished dialing and the ringing is sometimes immediately following

I can't get past the dialtone.

Down again...
Sunday, I could make calls from my phone system.
Now it stopped accepting outbound calls from the phone system.
Dialing 1-area-number.
I've rebooted the PC system twice.
I've used the MJ fix/updater.
I can callout with the softphone.

OK, narrowed it down to...
It will dial out from a phone IF there is a area code with the number.
It won't dial out without an area code.
Even local calls.

It now requires all numbers start with 1.
I don't recall it ever doing that before.


.

az2008 wrote:

Cybersys wrote:OK, I tried a powered hub, then tried another phone.
Then tried a different PC.
Still have the same problem.

Sounds like the USB device is broken.

Mark

How is that even remotely possible????
I can call-out with softphone!

az2008 wrote:

Cybersys wrote:Yes, Softphone works ok.

I can't explain the sudden onset of the problem. But, I would try a powered USB hub. And/or a different handset.

Mark

OK, I tried a powered hub, then tried another phone.
Then tried a different PC.
Still have the same problem.

az2008 wrote:Does it work using the softphone? If yes, have you tried using a powered USB hub?

Mark

I think you missed the point.
It worked for the past 7-8 months.
Now I can't dial out with the phone.
Yes, Softphone works ok.

I'm having the same exact problem.

I feel that the single biggest mistake MJ made was trying to make 10 million computer variations function properly with a single USB device.

In case some still don't understand the full ramifications, the little MagicJack USB device causes your PC to run a program in the background which inturn ...

Does anyone know how to go about doing this? I might be interested in buying a bulk quantity for resale. I see people doing this on ebay successfully and figured it's worth a shot. I read somewhere on here that there's a minimum quantity of 50, which is fine. Any info would be appreciated!
I ...

packen wrote:Am I the only one with this problem?

Try doing a search on the keyword 'volume'.

Mr. Hacker wrote:You can ask me anything regarding to magicJack..
"Technical issue's"
just trying to help you out.

I take it you are auditioning for a job with MJ?

solderman wrote:The only thing I have noticed with the Upgrade is the OK and CANCEL buttons are missing from the volume control setting.
Just an X there now to x out of it, that is not really a problem though.

Same thing here.
The outgoing volume issue seems to have improved some.

That was one of the nicest bashing Jobs I have seen. You will have to reveal your secret to such eloquent composure under stress.
35 years of systems analysis, design, and programming

Seriously, your Item # two caught my eye. Are your referring to the fact that it drops pack to the built in 70 ...

Your system and mine is different and I bet there is hundreds different replying to this forum.
I agree, there are too many people that think everyone uses the same setups as they do.
Unfortunately, the problem solidifies when there are programmers with the same mentality.

I think the common area ...

strndedinalska wrote:It's in the control panel under volume/microphone. The soft phone only adjusts headsets and microphones plugged into the outside ports.

Yes, I know, mine is cranked 100%, and my called parties are still unable to hear me.

New feature - enough volume for called parties to hear you.
Does anyone know where to buy this feature?

If they can get the volume fixed we will buy a dozen more units.
As-is, it's not a reliable (volume) service for frequent callers.

Keeping in mind that MagicJack is a beta product, our expectations shouldn't be at their highest level.

The main issues I have are...

1) the microphone (output) volume control is flawed
The script that controls volume is locked at about 60%.
Nothing you do to change settings in the MagicJack ...