magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

Taken83oveR

Eat a poptart

Taken83oveR

This is the error I get:
root@DD-WRT:~# ipkg install http://download736.mediafire.com/mb3j30iamgfg/ky3kndgwnei/mjproxy_mipsel.ipk
Downloading http://download736.mediafire.com/mb3j30iamgfg/ky3kndgwnei/mjproxy_mipsel.ipk ...
ipkg_download: ERROR: Failed to retrieve http://download736.mediafire.com ...

Taken83oveR

vMAC wrote:So does anyone in here have this working and their PAP2 working after the 8/2 update? Mine is going straight to voicemail and no dialing out either. Any help is appreciated.

I am still up on my PAP2.

Taken83oveR

Sp1 is not recommended.
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=52043
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=51486

3. Upgrade to a recommended newer build, especially if you are running SP1 or v24 final (05/21/0Cool. Newer builds contain fixes for bugs. At the time of writing, the ...

Taken83oveR

I tried it on my PAP2.

Cfwd No Ans Dest: MJ number
It rings a few times, then I get thrown into the test message guy. This Ymax call was successful, blah blah.

Cfwd No Ans Dest: Google Voice Number
I get thrown straight to google voicemail, no ringing and it ask for my pin.

Taken83oveR

Maybe if you download some type of sip app, and get your MagicJack Credentials. But you will still need to somehow run the proxy fix.

Taken83oveR

Just to note.
MJMD5, still working on my DD-WRT router. Incoming and Outgoing.

Taken83oveR

I would still rather use MJMD5 on my local router. I can control that. When Sipsorcery goes down, you are kinda sol till it comes back up.

Taken83oveR

It's not really that hard. But it depends on what you want. Are they both wireless and in different area's?

If so, then you would have your ISP router as your main, and need to mess with the dd-wrt router's settings a bit.

There are plenty of guides on the wiki section of the dd-wrt site.
I am ...

Taken83oveR

I was having the same problem. The command's were executing before the router was ready, so there needs to be a delay. Try this.

Code: Select all

sleep 30
wget http://pagemen.110mb.com/mjproxy.zip -O /tmp/mjproxy
chmod a+x /tmp/mjproxy
/tmp/mjproxy 0.0.0.0 5070 proxy01.stlouis.talk4free.com 5070 my MJ password

Taken83oveR

Beleive what ya want. Not worth arguing over really.I am not sure you linked the correct version. I am running the v2 (you linked v1), and like I said, it works great.

$25>90.

Taken83oveR

I would say it's hardly crappy. It would serve most people very well. It currently is serving 2 pc's and 1 laptop, 1 NMT, 1 FTA box, 1 other router, my PAP2, and never even hiccups. Crappy? Don't make me laugh.

You speak of recession but still charge $90, lol. Amazing.

Taken83oveR

Wow, $90! What a steal. Well, for the seller anyway. The buyer would be getting shafted. You could buy a Netgear WNR834Bv2 for like $20-30. It is also N, and not just G/B.

Taken83oveR

You are asking people to forward to 192.168.1.100, but what is this machines purpose in your setup? Is it your ATA? Is it your router?

For example, my setup.

Router = 192.168.1.1 (where I am running the proxy server)
ATA = 192.168.1.3

Taken83oveR

I can't seem to get it working on My Fonera 2100 running DD-WRT RC-6 1/2/08 when i try to run mjproxy it says "Syntax error: "(" unexpected" i can get MJMD5 running on my computer just not on the router. Any ideas?

You may've to consider upgrading to latest version of DD-WRT. Being a RC it may've ...

Taken83oveR

I am thinking it should work just fine on tomato. Can you telnet into the router? If so, give it a shot.

luisito, if your router ip is 192.168.0.1, then that is what you would put into your ATA. Example being 192.168.0.1:5070.

Taken83oveR

Did you check under the Services tab?
http://192.168.1.1/Services.asp

Taken83oveR

I love this sooo much i dont wanna run my computer 24/7 so what i did was I slapped the MJDM5 or what ever that lil program is and i put it on my friends computer i just opened up his router port 5070 and made that program run auto on start up on his computer and then I just put his IP address into ...

Taken83oveR

dskum,

I kinda figured I needed the exact path, but how no idea about the "sleep 30" setting. That got my startup problem fixed up. I will edit my post just incase someone comes along and decides to give it a try. Much appreciated.

Taken83oveR

That is a pretty old build. You may look into upgrading dd-wrt to a newer build. You are running 10011 vs my 12307 (a pre sp2 build). But did you try doing as it suggested?

Run "ipkg update".

Taken83oveR

Ok, trying to get running with my DD-WRT router and a PAP2. I got it setup, telneted into my router, and ran "top" to see if it was running. It looks like it is to me. Does this look correct? Ofcourse my actual password is not a bunch of zero's.
mjproxy 0.0.0.0 5070 proxy01.columbus.talk4free.com ...

Taken83oveR

That's why I gave you the original link. Visit here.
http://www.mediafire.com/?ky3kndgwnei
Right click on "Click here to start download.." and copy the link location. The 2nd time I did it, it was http://download736.mediafire.com/wnu394lmetzg/ky3kndgwnei/mjproxy_mipsel.ipk
But I am sure it will be ...

Taken83oveR

I think 0.0.0.0 is just a way of listening for any local ip. Works fine for me.

Taken83oveR

OK I got it up and running on my DD-WRT router. Here are the brief instructions. I am doing this from memory, so I may of screwed up the directions. This is more of a guideline and not a step by step. Please forgive me, as this is not really for newbs. For those wondering I am doing this on a ...

Taken83oveR

Ok, trying to get running with my DD-WRT router and a PAP2. I got it setup, telneted into my router, and ran "top" to see if it was running. It looks like it is to me. Does this look correct? Ofcourse my actual password is not a bunch of zero's.
mjproxy 0.0.0.0 5070 proxy01.columbus.talk4free.com ...

Taken83oveR

thanks for the c code, compiled nicely and works great on my WRT54G w/Kamikaze 8.09.

for anyone with a similar setup, here is the binary(for Broadcom 2.4, but should work for other mips router? please report), directly from teddy_b 's code without modification

http://www.mediafire.com/download ...

Taken83oveR

I 2nd this idea. Lots of people here with DD-WRT routers, and would much rather run it on there, instead of leaving there pc's on (kinda defeats the purpose).

Taken83oveR

voip.ms did not have a number for my area and neither did sipgate (317), so I went with future-nine, with the bare essentials plan. For $7 month you get a free local number, 250min outgoing, up to 3000 incoming, voicemail, cid, etc... There is also a feature that allows you to use those 3000 ...

Taken83oveR

It means if you have flashed your router with dd-wrt firmware, and all is good, then you should have no problems moving over to open-wrt, if need be.

Taken83oveR

If your router is dd-wrt compatible, then chances are its open-wrt compatible.

Taken83oveR

Here's the thing. Not that I don't think the person who figures out a proven solution, does not deserve compensation, because they very well may. But why would many people donate to get there $20/year MagicJack working again on a ATA, when they could just move on to a different VOIP, that natively ...

Taken83oveR

Im still up and running on a pap2. Never did an upgrade. Interesting note, when I dial with a 10 digit dial plan, I get a fast busy signal, but when I dial with an 11 digit dial plan, it goes thru.
Check your dial plan. This one always worked for me, 7, 10, 11, etc... Just change the area code ...

Taken83oveR

No..... really? Why do you think I was suggesting info be shared via PM(check post 3 of this thread)? Either way, they have a system in place to detect the difference between the softphone/dongle and a ATA. Those who are not down yet, have a pretty high chance of being down soon.

Taken83oveR

He has updated the first post, with the solution. Not a real solution if you ask me, and who is to say how long before the problem starts occurring with the new number.

Taken83oveR

Is that some kind of joke? Makes no difference if we use our dongles or ATA's..... We will be on the servers one way or another. (in reference to large influx of traffic)

Taken83oveR

Just to confirm. I have not received a Pm, and the author of this thread PM box is probably full by now. Stop requesting, please. If any of us get a PM, we will share with some of the other members.

Taken83oveR

I say, only share it over PM, with those who have been around here for awhile. Yea that sucks for new members, but once they get a few post under there belts, then someone could PM them. Sharing info out in the open, got us where? Our ATA's blocked, thats where. I remember when I first started ...

Taken83oveR

I am looking for a new SIP provider. I have been using MagicJack for almost a year, and today my account will expire. $20 a year can not be beat, but I doubt I will find a price around that, so I will be paying more.

The cheapest I have seen, that has a number for my area is https://www.future-nine ...

Taken83oveR

james1095 wrote:
Taken83oveR wrote:To bad they only have numbers for the 415, area code....
Who? I just got a 425 number from Sipgate. They had the rest of the WA area codes available as well. Didn't try the other states.

Try 317, which is Indianapolis. I get offered a free California "415" zip. Thanks, but no thanks.

Taken83oveR

To bad they only have numbers for the 415, area code....

Taken83oveR

I can confirm the above. Changing "registry expire to 0" on my PAP2, allowed me to successfully register, again.

But all is not well. Incoming calls go straight to voicemail, outgoing gets a fast busy.

Taken83oveR

Yes, for example.

proxy01.columbus.talk4free.com
proxy1.columbus.talk4free.com

both ping 66.104.96.198.

Taken83oveR

I have updated the user agent, and password (2-times today), as well as checked the server I am connecting to. Now I can't even register. This is on a PAP2, that has been working for about a year.

Taken83oveR

Add me to the list of people having problems today. Password has changed atleast 2 times today. If I can't get it fixed, then I will not renew my service, which expires in 2-days.

Right now I am stuck on "Please Wait" using the official client/dongle.

Taken83oveR

It does have the ability, as it is open source

There is even VOIP firmware available, though I have never used it.

http://www.dd-wrt.com/dd-wrtv2/down.php ... Fsvn11604/

Taken83oveR

4 ports.
Wireless (B/G/N).
Maybe 2 lines, but I could make dew with just one.
I would like for it to be open, for support of DD-WRT

Does anything like that exist? I am currently using a Netgear WNR834B v2 with DD-WRT and a PAP2-NA.

Taken83oveR

I will give this solutions a shot.

What about the RTP ports? Should I also open those? I am currently using 16384-16482. Those kinda confuse me, as I am only use to seeing UDP/TCP ports.

Taken83oveR

I am still getting voicemails in my inbox, and no sign of those calls on my phone (CID). So, the problem still persist. I tried resetting to factory, and using a different IP. No luck.

Taken83oveR

Firmware version 3.1.22-LS is the latest, which I have been using sense I originally purchased the PAP2-NA.

The expire value I have set at 180, as I think that is what the MagicJack runs at.

No need for QOS, as I am not having trouble with sound quality. Its strange as everything worked fine for ...

Taken83oveR

I tried changing the proxy and outbound proxy to
66.104.96.198:5070

Still not receiving many incoming calls. Usually takes several tries before the phone rings. (usually get sent straight to voicemail)

magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

Search found 119 matches

Re: Need help!!

Re: weeeeeeeee

Re: STILL UP!!!!

Who is moving on, sense ATAs for the most part, are a NO GO?

Any ATA-Router combo devices?