magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

sabresfan wrote:

tvland wrote:What's the latest user agent string?

This is from my latest dump User-Agent: MagicJack/2.0.554f (SJ Labs)

Thank you!

Fast busy signals indicate dial plan problem. Try the one below and see if that helps at all. This should work with 7, 10, and 11 digit dialing, and should work fine for international calling.

(*xx|[3469]11|0|00|<:1480>[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|<:1>[2-9]xx[2-9]xxxxxxS0|xxxxxxxxxxxx.)


For a ...

That's interesting. To my knowledge, CID block did not work .....

I don't see anything magic about his setup. I bought it and received no license code to activate it. I called their support number. No answer..I left a voicemail message for unknown parties. I have emailed their support too many times.

I am not fond of being ripped off so if who ever deals with ...

Since many people are using Linksys SPA2102/SPA2102-R (previous Sunrocket), this update/upgrade may be for you....

5.2.10 <--- NEW

http://rapidshare.com/files/276011631/SPA2102_5.2.10.zip

Here are older firmware versions in case someone may need them...

5.2.5

http://rapidshare.com/files ...

I figure since many people here are using DD-WRT firmware, I will post the "Special Edition"

The special DD-WRT mega/standard/mini/micro distribution which an additional PPPOE-Relay (standard only), Per User Bandwith Control and Zero IP Hotspot. In the beginning this version was mainly designed for ...

joe,

Superb find!

Thanks!

TOF,

I registered SPA2102 (firmware 5.25, latest) with no problems using WRT54GS DD-WRT Router. I put my ATA after the router and specified 192.168.1.1:5070 in the proxy field. You need to make sure your proxy is running properly. To check, you can telnet into the router and type "top" and you ...

ydnim,

I replied to your PM with some suggestions. Please let me know your results.

Thanks for your work. I have not tried it, but I will tonight.

LOL @ Fireware

Kimberly,

I updated mine to version 5.2.5 and works like a charm. You will not get locked out, unless you perform "factory reset".

I tried as of 19-01-2009 1:22am USET to get my SPA-2102 to register with the magicjack servers. I entered the SIP information and the User Agent, used port 5070 and as far as I can tell entered all setup as found in searching the forums without luck. The SPA-2102 would not register with magicjack ...

Under regional settings, check GMT settings to make sure they correspond to your timezone. (ie. Eastern: GMT-5).

stroths,

I've used them both and they both work well. I prolly wouldn't purchase another one.

stroths,

I haven't tried your program yet, however I just wanted to say THANK YOU for your work and contribution!

Looks like it's time to update the User-Agent....

dmsfca wrote:Any idea what the MJ sends as that host header or user-agent string? I suppose an http capture would tell...

Should be something like: MagicJack/1.80.451b (SJ Labs)

we need to work on a firmware that will send magic jack user agent headers to their servers. then that would pretty much eliminate the chance of getting banned for using third party hardware.

Linksys devices allow you to input your "own" user-agent. If I'm not mistaken, you should see User-Agent ...

I have a left over SunRocket Linksys SPA 2102 that is sitting around. I have tried to "unlock" it from TeleBlend settings to no avail. If anyone has a way or serial/password to unlock it and the settings to use it with MagicJack, I would really appreciate the information.

buckoo at bigfoot dot com ...

Interesting.... Very interesting.... But I guess I am wondering why this problem occurs on the "newer" MJ accounts, and not on the older ones?

Make sure you are using :5070 after your proxy.

Example:

proxy1.boston.talk4free.com:5070

Hope this helps....

HolmanGT,

My friend's MagicJack is less than a 1 month old. Mine is almost a year and I don't have any issues. I tried to troubleshoot his MJ, but we couldn't figure it out. I did eliminate the actual phone, MJ itself, or any issues associated with PC since he is using an ATA. I tried to get some ...

I don't think this is a PC, USB, or a sound card issue. I have a friend who uses an ATA and he is experiencing same issues/problems. Around 10 to 15 min into the phone call, it sounds like someone is pressing a key. I think the problem is on MJ side.

I'm having exactly same problem with 216 area code. I hear the caller, they cannot hear me.

In the proxy field try using: proxy1.losangeles.talk4free.com:5070

In my Linksys SPA2102, under "SIP" tab, I have "SIP USER AGENT NAME" which is set to "$VERSION" and I have "SIP REG USER AGENT NAME", which is blank. What of those do I set "MagicJack/1.80.447a (SJ Labs)"? Any other suggestions to minimize detection?

Thanks guys!

Thank you both!

Is there any values that could be changed in ATA to "fly under the radar" with MJ, so it appears close to original USB?

Thanks!