Wireless Phone Compatibility List

magicjock · Post by **magicjock** » Tue Jan 13, 2009 2:44 am

Please share your wireless phone success stories. (Maybe this thread can become a sticky?)

Not Compatible (with 01-12-2009 MJ firmware): Panasonic KX-TG5761
Does not break dial tone.

isleblue65 · Post by **isleblue65** » Tue Jan 13, 2009 11:55 am

NOT compatable with Panasonic KX-TC1871
Does not break dial tone.

Rickiev · Post by **Rickiev** » Tue Jan 13, 2009 12:30 pm

Panasonic KX-TG2343 Works great.

hsweiss · Post by **hsweiss** » Wed Jan 14, 2009 12:42 am

Works great with a FREE (100% rebate) American Telcom 2.4GHz phone that I got from Staples a couple of years ago (they still carry it but not with the rebate):

http://www.staples.com/office/supplies/ ... 9:CL162883

slowjim · Post by **slowjim** » Wed Jan 14, 2009 1:00 am

Panasonic KX-TG5776 works perfect, caller iD everything works correctly.

chrisvs · Post by **chrisvs** » Wed Jan 14, 2009 3:09 pm

NOT compatable with Motorola MD481
Does not break dial tone.

larrydday · Post by **larrydday** » Tue Jan 27, 2009 7:16 pm

Works good with Panasonic KX - TG5651.

bitstopjoe · Post by **bitstopjoe** » Tue Jan 27, 2009 7:34 pm

Motorola MD-670 (cordless 5.8ghz), works A OK here even caller ID.

Joe Sica

DanD · Post by **DanD** » Tue Jan 27, 2009 7:41 pm

Panasonic KX-TG5050 works fine.

tony · Post by **tony** » Tue Jan 27, 2009 9:02 pm

Vtech Cs5111-2 works well

AT&T E5802B works okay, but low volume both ways

luigi2008 · Post by **luigi2008** » Tue Jan 27, 2009 9:27 pm

Uniden DECT2085 works great with caller id.

Bugggs · Post by **Bugggs** » Wed Jan 28, 2009 12:09 am

Works great with GE 2.4 GHz (1529DG)

Not working with a GE 5.8 GHz (TC25922FE2-A) can't dial !

:(:(

Oh well !

rodak · Post by **rodak** » Wed Jan 28, 2009 12:21 am

Works great with Panasonic KX-TG9341 and KX-TG2382.

magicscott · Post by **magicscott** » Thu Jan 29, 2009 12:53 am

Works great with Uniden DCT756-3!
Caller ID, call waiting, voicemail all working.
I also have two other older Uniden cordless phones and one of them (the oldest one - about 10 years old 600mhz) doesn't display CallerID but that is ok.
Other than that they all work and I have the MagicJack connected to my mainline for all the phones in the house and they all work together flawlessly!

Scott

tjnamtiw · Post by **tjnamtiw** » Wed Feb 04, 2009 7:47 pm

magicjock wrote:Please share your wireless phone success stories. (Maybe this thread can become a sticky?)

Not Compatible (with 01-12-2009 MJ firmware): Panasonic KX-TG5761
Does not break dial tone.

Will NOT ring GE DECT6.0 Model 28112EE3-A. Tried on two computers.

BOOKNOOK · Post by **BOOKNOOK** » Thu Mar 12, 2009 2:25 pm

New to the VOIP world and MJ, just received my MJ and purchased a Uniden DECT 2060W So far it performs outstandingly, even in distance tests. I have one issue not getting the VM indicator light on the handset. Have been searching the archives for answers but have not yet found anything.

free2talk · Post by **free2talk** » Thu Mar 12, 2009 4:32 pm

Voicemail indicator DOES NOT light up on your handset phone with magicjack.
You do receive emails from them with a sound clip of the voice mail.

If you need the voicemail in your cordless then set it up to go to voicemail of your cordless phone base in 3-4 rings.That way your machine will pick up the voice mail.

BOOKNOOK · Post by **BOOKNOOK** » Thu Mar 12, 2009 6:52 pm

Thanks for the reply, So you say this model handset won't work with the MJ VM system in either setting the phone is capable of? I see in the phone doc's it supports both (FSK) Frequency Shift Keying & (SDT) Stutter Dial Tone, if so what does MF use?

Thanks

murphy · Post by **murphy** » Thu Mar 12, 2009 8:46 pm

It doesn't use anything. It is not supported.

tjnamtiw · Post by **tjnamtiw** » Thu Mar 12, 2009 9:14 pm

murphy wrote:It doesn't use anything. It is not supported.

Not knowing which cordless set to buy that will work with magicjack either to ring or give the caller ID is what pushed me toward ooma and BOY am I glad I did! Everything works with two separate cordless phones (5 in all), caller ID, etc etc.

pharmboy69 · Post by **pharmboy69** » Tue Mar 17, 2009 9:43 pm

Will not work with GE DECT6.0 TC28213EE1.

mberlant · Post by **mberlant** » Tue Mar 17, 2009 9:56 pm

With which service will your GE DECT phone not work, MJ or ooma? If it's MJ, exactly how does it fail to work?

pharmboy69 · Post by **pharmboy69** » Tue Mar 17, 2009 10:06 pm

mberlant wrote:With which service will your GE DECT phone not work, MJ or ooma? If it's MJ, exactly how does it fail to work?

With Mj,device option cannot be checked under menu and absolutely no dial tone.Tried MJ repair tool(useless),do you have a possible solution?

-pharm

mberlant · Post by **mberlant** » Wed Mar 18, 2009 12:20 am

Since the MJ dongle does not have any way of knowing if an idle telephone is connected to it or not, your problem is probably not related to the telephone instrument but rather to the interface between the dongle and the PC. Also, the message you report indicates that the OS cannot see the dongle, regardless of what may or may not be connected to that dongle.

Does the blue light come on? Do you get "Ready to Call" on the screen? Are you connecting directly to your PC or through a (n underpowered) USB hub?

pharmboy69 · Post by **pharmboy69** » Wed Mar 18, 2009 6:40 pm

mberlant wrote:Since the MJ dongle does not have any way of knowing if an idle telephone is connected to it or not, your problem is probably not related to the telephone instrument but rather to the interface between the dongle and the PC. Also, the message you report indicates that the OS cannot see the dongle, regardless of what may or may not be connected to that dongle.

Does the blue light come on? Do you get "Ready to Call" on the screen? Are you connecting directly to your PC or through a (n underpowered) USB hub?

Blue light on and ready to call and the soft phone does work. Its plugged directly into computer using a good working USB 2.0 port.OS does indeed see the dongle,just not the handset.Any other ideas?

-pharm

rbrad51 · Post by **rbrad51** » Mon Apr 06, 2009 10:13 pm

Uniden DXI4560-2 works fine if plugged into a powered hub. I'm using a D-Link DUB-H4.

Popgory · Post by **Popgory** » Fri Apr 10, 2009 7:56 pm

Panasonic KX-TC930-B (2-line) with a REN of 0.2B and an old Uniden EXP091 w/ren of 0.7B. No problems with either.

Yes, they are old 900MHz units, but we don't worry about them breaking.

jaytcsd · Post by **jaytcsd** » Sun May 31, 2009 3:00 pm

Every key but the 0 key gets decoded. I have to dial on the PC keypad or screen.

monkeyboy · Post by **monkeyboy** » Sun May 31, 2009 4:50 pm

Panasonic KX-TG2480 works fine (2-line phone)
Old AT&T 5510, works mostly...

GNX · Post by **GNX** » Tue Jun 02, 2009 9:29 am

Someone reported the KX-TG2382 works fine, but my Panasonic KX-TG2382B will not break the dial tone. It can take an incoming call though.

ATT 5500 cordless (old) works fine.

kevin128 · Post by **kevin128** » Tue Jun 02, 2009 5:35 pm

Works great with Uniden 43-266

Frogbone · Post by **Frogbone** » Thu Jul 02, 2009 12:25 pm

Works great with VTech Dect6.0

luigi2009 · Post by **luigi2009** » Thu Jul 02, 2009 7:58 pm

Uniden DECT2085-3 works great since day one.

tomahawk1 · Post by **tomahawk1** » Sat Jul 04, 2009 12:03 pm

UNiden dect 6.0 (dect 1580) works fantastic.

altatension · Post by **altatension** » Tue Jul 07, 2009 7:13 pm

My Panasonic KX-TG2730 system (3 phones) works great. I got the set on ebay for $30. True is only 2.4GHz but works for me.

linny · Post by **linny** » Wed Jul 08, 2009 4:20 pm

Works with Uniden Model TRU9485 Power Max 5.8ghz digital with answering machine. No problems, plus the MJ unit is on a stand alone laptop with a P3 and running windows XP.

tazxx · Post by **tazxx** » Wed Jul 08, 2009 9:41 pm

Works with Uniden CLX485 Power Max 5.8ghz digital with answering
machine. I have the answering machine set at 4 rings and have no
problems.

alanwbaker · Post by **alanwbaker** » Sat Jul 18, 2009 7:07 pm

Works well with Uniden DECT1580-2 (purchased at Costco)

duRden62 · Post by **duRden62** » Sun Jul 19, 2009 1:34 pm

Vtech DECT 6.0 and Handset Speakerphone (CS6209) Caller ID works and upgradable to 12 hand sets

kschleic · Post by **kschleic** » Mon Mar 08, 2010 10:05 pm

I have the GE Dect phone and it will not ring with Magic Jack. I asked their tech support and they don't know why either. Does anyone have any ideals?

jackiehsu97 · Post by **jackiehsu97** » Sun Mar 14, 2010 9:33 pm

Hello. The magicJack device works with my crappy PANASONIC KX-TGA9333T.

Best wishes on the list,

-=-=-=--Jackie-=

TNewton · Post by **TNewton** » Mon Mar 15, 2010 9:04 pm

Hello All,

Still searching the Forums but my Panasonic KX-TGA820CB can make and receive calls. However no caller ID (looking for a resister), Makes a fax noise when picks up (looking for the thread for that still after 1 hour on here), and I have to either wait for the second call to hang up before switching back to the first caller or I have to use the soft phone. Sometimes when I am in call waiting mode it will hang up both calls.

I am looking into another phone but I really like Panasonic Phones... Soooo???

Intimmy98 · Post by **Intimmy98** » Wed Mar 17, 2010 12:48 am

Works great with my Vtech (mi6889) 5.8GHz with answering machine and 4 handsets. Caller ID displays incoming (number only) unless caller is pre-stored in the Vtech's directory which is shared by all 4 handsets.

magicrich · Post by **magicrich** » Wed Mar 17, 2010 1:26 am

Panasonic KX-TG6445 5 phones. The spoken caller ID only speaks 8 of the 10 digits of the incoming #. Calls are fine otherwise.

jackiehsu97 · Post by **jackiehsu97** » Wed Mar 17, 2010 2:54 pm

magicrich wrote:Panasonic KX-TG6445 5 phones. The spoken caller ID only speaks 8 of the 10 digits of the incoming #. Calls are fine otherwise.

OMG! I have the EXACT same issue with a different phone model!!!! Panasonic's too, though....

magicrich · Post by **magicrich** » Wed Mar 17, 2010 4:51 pm

Hey Jack,

I knew I couldn't be the only one with the missing last 2 digits problem.

Let's hope someone comes up with a fix. I tried some of the other CID fixes on this forum and tried MagicFeatures with incoming calls from 2 different phones, but no joy yet.

Let me know if the free trial of Magic Features software works for you or anything else. I'm going to do a more thorough test of MagicFeatures.

Thanks

Rich

jackiehsu97 · Post by **jackiehsu97** » Wed Mar 17, 2010 5:50 pm

magicrich wrote:Hey Jack,

I knew I couldn't be the only one with the missing last 2 digits problem.

Let's hope someone comes up with a fix. I tried some of the other CID fixes on this forum and tried MagicFeatures with incoming calls from 2 different phones, but no joy yet.

Let me know if the free trial of Magic Features software works for you or anything else. I'm going to do a more thorough test of MagicFeatures.

Thanks

Rich

-Jack (lol) that's a cute name...
I think the issue is unrelated to any CID fixes currently out there..... I beleive it has to do with the length and stuff of the REN on magicJack. The REN power is not what I'm referring to, I beleive that the issue on these Panasonic phones is specific to magicJack. The length of the REN thingy that comes out of magicJack, I beleive, is what is causing the abrupt cut off.... but I'm not really sure.

I'm not too worried though, because the speaker of my CID speaking person has a HORRENDOUS ACCENT. How lovely to hear someone with an accent screaming out numbers and letters when one receives a call... but still, it's a nice feature. I would post a thingy regarding this, and ask for assistance... but I doubt many would know of the answer.....

-=-=-=-=Jackie (or Jack lol so cute)-=-=

Acecare · Post by **Acecare** » Wed Jul 07, 2010 3:30 am

I am currently using VOiP phone for business purposes. It is very flexible because wherever you are, you are still connected with the phone. And at the same time, the monthly charge is very cheap.

mhoffman5 · Post by **mhoffman5** » Mon Oct 04, 2010 3:05 pm

I was in the process of buying a new phone for my MJ and referred to this thread. The search function did not work very well so I had to wade through it. I decide to make list of the devices that were posted in the thread. I couldn't find a way to upload a file so I just pasted it in. If anyone can tell me how to post a file I will.

[/img]

bitstopjoe · Post by **bitstopjoe** » Mon Oct 04, 2010 4:49 pm

Awesome post.. Great job in putting that all together and taking the time to do so..
I just wonder how long till someone asks if their phone works with MJ and it is on your list

Joe Sica

magicJack and magicJack Plus Support, Reviews, FAQs and Tricks