Thin Client phone problem

[MagicJackInSac]

Okay, I have burned through many posts and searches and cannot find an answer to my problems. I am running a thin client which i got from Stroths, the first time I plugged in my Magic Jack It ended up crashing, so i reinstalled XPe from Microsoft. I did not upgrade to Stroths version. I couldnt understand it enough to make it work. So basically I am running a thin client now with original XPe with Stroths Memory upgrade. My problem is that I want to run a phone through it. The blue light is on, but i do not get the option to switch from headset to phone. Also, I hook up a headset and i can call out fine and the other party can hear me, but I cannot hear them. Can anyone tell me what I am doing wrong?

[tony]

My problem is that I want to run a phone through it. The blue light is on, but i do not get the option to switch from headset to phone.

See the 8th post in this discussion. http://www.phoneservicesupport.com/usin ... t4350.html

Excerpt below

Try installing an audio driver. See Jeepster's great guide for setting up a thin client. Scroll down almost to the end of the 1st posting to the section "Download and install USB audio driver" where you'll see a link: http://rs9.rapidshare.com/files/1398091 ... Driver.zip

I can't recall if that solved the problem immediately, or if you need to go to Start > Control Panel > Sounds and then change the sounds to the new usb driver (I don't have access to the TC currently, so don't know the exact tab name).

Link to that discussion
http://www.phoneservicesupport.com/dumm ... t3605.html

[MagicJackInSac]

thanks tony, installing the USB audio driver worked