configuration help

[taz_galvan]

Can someone please help me i have a lingo adapter iAN-02EX and i was able to unlock it, the problem is that now i don't know how to configure it right, it give me a busy tone when i try to make a call and it don't even ring when i call it

I make a offline copy of the web interface so can someone please help me and tell me the correct way to configure it

after download the file just unzip it and open the index.htm and you can navigate from it

sorry i could not fine how to attach the file here so please download it from the next link,

http://www.mediafire.com/?sharekey=db65 ... f6e8ebb871

[mberlant]

I see three things.

First, your VoIP User page is empty. You need to put your MJ user name (E212555236801) into the Username field and your MJ password into the Password field. You can put whatever you wish into the Displayname field (it will be ignored by MJ) and I recommend putting your MJ user name into the Login ID field.

Next, on the VoIP SIP page, change Expires from 3600 to no more than 840. Otherwise, you will not be able to receive calls for the latter 45 minutes of each operating hour.

Then, on the STUN page, you should use stun.ekiga.net, port 3478, for the STUN server. Leave Local Port set to 5070, since that is what you set your own listening port to on the SIP page.

Please make these adjustments and see if your status improves. Good luck.

[taz_galvan]

I change those settings and still im not able to make it work is not giving me dial tone, and if i call it is sending me to the voice mail without even ringing

here are the new files with the modification, thank you a lot for your help


http://www.mediafire.com/?zmjmmztm2gj