ATAs working again using sipsorcery.com

richardtaur · Post by **richardtaur** » Tue Jul 14, 2009 3:20 pm

If incoming dial plan I provided is not working well, then I will suggest you to leave blank option in In Dial Plan.

zixy_tris · Post by **zixy_tris** » Tue Jul 14, 2009 3:23 pm

i left it blank

mdima · Post by **mdima** » Tue Jul 14, 2009 6:14 pm

I'm curious whether sipsorcery.com can be relied on for daily use.
How stable is this environment? Is it available 24/7, goes down for periodic maintenance, etc?

mel2000 · Post by **mel2000** » Tue Jul 14, 2009 6:56 pm

Just so I get the facts straight: Is mysipswitch a workaround for using mj with a 24/7 ATA without the computer and dongle? If so, can it be used with *any* ATA?

Post by **laserjobs** » Tue Jul 14, 2009 7:24 pm

mel2000 wrote:Just so I get the facts straight: Is mysipswitch a workaround for using mj with a 24/7 ATA without the computer and dongle? If so, can it be used with *any* ATA?

Correct, no computer or dongle needed and should work with any ATA.

mel2000 · Post by **mel2000** » Tue Jul 14, 2009 7:41 pm

laserjobs wrote:
mel2000 wrote:Just so I get the facts straight: Is mysipswitch a workaround for using mj with a 24/7 ATA without the computer and dongle? If so, can it be used with *any* ATA?
Correct, no computer or dongle needed and should work with any ATA.

Thanks for the prompt reply. Another question: Is sipsorcery the same as mysipswitch? When I pasted and updated the inbound mysipswitch Ruby code into the textarea I received the following error:

Ruby dial plans cannot contain "require ", "include", "::", "`" or "system"

After changing the dial plan back to default, when I clicked the Monotoring tab, the Status prompt states "Not logged in"

What am I doing wrong?

synchron · Post by **synchron** » Tue Jul 14, 2009 8:11 pm

mel2000 wrote: Thanks for the prompt reply. Another question: Is sipsorcery the same as mysipswitch? When I pasted and updated the inbound mysipswitch Ruby code into the textarea I received the following error:

Ruby dial plans cannot contain "require ", "include", "::", "`" or "system"

After changing the dial plan back to default, when I clicked the Monotoring tab, the Status prompt states "Not logged in"

What am I doing wrong?

Currently, MySipswitch is being phased out and only Sipsorcery accepts new accounts. Most of the Ruby coding is compatible and when I migrated to Sipsorcery from MSS, only the incoming code needed tweaking. The dialplans work great for a Voip system where you are using 2 or more SIP providers and when Magicjack ATA service is down, I can always use the my backup Voip system where the Ruby dialplans come in handy.

But if MJ is the only provider, you really only need a blank incoming and a one line script: Sys.dial("MagicJack)" for outgoing to basically work. There is really no need to use the Ruby script generator as its tailored to a "soon to be obsolete" Mysipswitch.

Synchron

Taken83oveR · Post by **Taken83oveR** » Tue Jul 14, 2009 8:36 pm

I would still rather use MJMD5 on my local router. I can control that. When Sipsorcery goes down, you are kinda sol till it comes back up.

mel2000 · Post by **mel2000** » Tue Jul 14, 2009 9:32 pm

Thanks for the additional config info synchron. I created a sipsorcery account, filled in the mj sip info and set up the simple outbound dial plan. MJ is my only VOIP provider. How do I connect sipsorcery to my ATA? Will I need to log in to the sipsorcery website every day?

BTW, the input text boxes on sipsorcery do not work with the Opera browser.

Post by **laserjobs** » Tue Jul 14, 2009 10:17 pm

Anyone else getting "registration to udp xxx.xxx.xxx.xxx:5070 timed out" when trying to register with their MJ account?

msiam · Post by **msiam** » Tue Jul 14, 2009 10:35 pm

thats what Im getting, laser..

Post by **laserjobs** » Tue Jul 14, 2009 10:42 pm

msiam wrote:thats what Im getting, laser..

Oh oh, sounds like an IP ban

zixy_tris · Post by **zixy_tris** » Tue Jul 14, 2009 10:46 pm

[quote="laserjobs"][quote="msiam"]thats what Im getting, laser..

Oh oh, sounds like an IP ban/quote]

Same here. It cannot register. I am sick of this cat and mouse game. I am just going to buy 2 new jacks and use the old way.

wondabwoy · Post by **wondabwoy** » Tue Jul 14, 2009 10:53 pm

laserjobs wrote:Anyone else getting "registration to udp xxx.xxx.xxx.xxx:5070 timed out" when trying to register with their MJ account?

LMAO, HAA, I was just about to post that, now I'm getting this too. PLEASE PLEASE, don't tell Dan is at work AGAIN, not this quick. I thought it was something I did, so ended up starting all over again, and still get this error "registration to udp xxx.xxx.xxx.xxx:5070 timed out" Anyone know what's going on?

Scrote · Post by **Scrote** » Tue Jul 14, 2009 10:54 pm

ATA is now registering but I cannot get Incoming call or Out Going call even tho I'm getting a dial tone.This solution is not flawless, to get ATA to work we got to brainstorm a lot

Taken83oveR · Post by **Taken83oveR** » Tue Jul 14, 2009 10:57 pm

Just to note.
MJMD5, still working on my DD-WRT router. Incoming and Outgoing.

zixy_tris · Post by **zixy_tris** » Tue Jul 14, 2009 10:58 pm

[quote="Taken83oveR"]Just to note.
MJMD5, still working on my DD-WRT router. Incoming and Outgoing.[/quote]

It is something to do with sip sorcery. Could be their server or as some one pointed out IP ban

richardtaur · Post by **richardtaur** » Tue Jul 14, 2009 11:14 pm

Hmmm..... It doesn't sound good. I couldn't check my SS status. If you guys have the issue, I think the dark night is coming.

synchron · Post by **synchron** » Tue Jul 14, 2009 11:24 pm

My call logs show 'request terminated' but the timetags are from GMT 7/15 12AM onward so the server is probably down and everyone's asleep in the UK or wherever Aaron is. Guess i'll go back to mjmd5 until SS gets fixed.

Synchron

Post by **laserjobs** » Tue Jul 14, 2009 11:26 pm

synchron wrote:My call logs show 'request terminated' but the timetags are from GMT 7/15 12AM onward so the server is probably down and everyone's asleep in the UK or wherever Aaron is. Guess i'll go back to mjmd5 until SS gets fixed.

Synchron

My other services are registering fine so I don't think that is the problem

MagicDump · Post by **MagicDump** » Tue Jul 14, 2009 11:32 pm

Same here I think is time to move over DD-WRT router.

Oh well it was a good try, it look like they banned the IP.

richardtaur · Post by **richardtaur** » Tue Jul 14, 2009 11:33 pm

Sigh~

synchron · Post by **synchron** » Tue Jul 14, 2009 11:43 pm

I'm confused, r u saying they're banning talk4free.com?

Synchron

richardtaur · Post by **richardtaur** » Tue Jul 14, 2009 11:46 pm

If it is not SS issue, then MJ is blocking the IP coming from SS server. I think.

synchron · Post by **synchron** » Tue Jul 14, 2009 11:55 pm

This is what you get for making this thread a 'sticky'!

Synchron

mel2000 · Post by **mel2000** » Tue Jul 14, 2009 11:57 pm

I'm having dialing problems. I setup sipsorcery with my PhonerLite softphone. I get the following errors when calling out:

when no dial plan created -> Error: Error loading dial plan
when dial plan created but empty -> Dial plan script was empty
when I used "...sys.Dial("magicjack")..." dial plan -> dial plan syntax error
when I used long Ruby outbound dial plan from mysipswitch forum -> timeout, no response from server

When I make an inbound call, it goes straight to voicemail.

I can post screenshots if needed. It's really frustrating seeing sipsorcery work for others but not myself.

EDIT: I just read about the possible IP ban.

MJuser403 · Post by **MJuser403** » Wed Jul 15, 2009 12:22 pm

Late last night I saw the "timed out" on my account at sipsorcery (looking at the SIP Provider Registration).

Still has the same problem today.

I am back to using my PC with MJMD5 running, and it is working.

I guess it is too easy for MagicJack to detect that all those calls were coming from sipsorcery and they banned it.

fordp301 · Post by **fordp301** » Wed Jul 15, 2009 3:11 pm

Is anyone able to make outgoing call today it was working yesterday with dial plan i use from here
(http://www.mysipswitch.com/forum/viewtopic.php?t=1477)

but not working since this morning when you call just get dad air nothing happen

I don't use incoming so i don't know its work or not.

Post by **laserjobs** » Wed Jul 15, 2009 3:22 pm

fordp301 wrote:Is anyone able to make outgoing call today it was working yesterday with dial plan i use from here
(http://www.mysipswitch.com/forum/viewtopic.php?t=1477)

but not working since this morning when you call just get dad air nothing happen

I don't use incoming so i don't know its work or not.

Did you read the other posts above yours?
I doubt MJ registering for you

fordp301 · Post by **fordp301** » Wed Jul 15, 2009 3:48 pm

laserjobs wrote:
fordp301 wrote:Is anyone able to make outgoing call today it was working yesterday with dial plan i use from here
(http://www.mysipswitch.com/forum/viewtopic.php?t=1477)

but not working since this morning when you call just get dad air nothing happen

I don't use incoming so i don't know its work or not.
Did you read the other posts above yours?
I doubt MJ registering for you

Yes its register successfully and i can get dial tone also but when you dial number its just get dad air.

zixy_tris · Post by **zixy_tris** » Wed Jul 15, 2009 5:14 pm

Ok guys you need to understand. There is two step registration with sorcery. One you register to sip sorcery and than sipsorcery registers MJ for you. You can still register to sip sorcery. But MJ on sip server is not registering. I hope people understand.

cooldude929 · Post by **cooldude929** » Thu Jul 16, 2009 3:14 pm

yah.. it sounds like a joke too.

ATA registers to Sipsorcery.. but Sipsorcery can't register to MJ (timed out error as its looking for UDP session not a sip)

Post by **laserjobs** » Thu Jul 16, 2009 3:36 pm

I can verify that magicJack has blocked the sipsocery.com IP address. Anyone know how to get around this with maybe using a proxy server?

mkaylor · Post by **mkaylor** » Tue Jul 21, 2009 11:22 pm

My PAP2T-NA is not registering. I left all the setting as it was when I was using it straight with MJ. I only changed the following:

Line 1 TAB
Proxy: sip.sipsorcery.com
Display Name: BLANK
User Id: MyIDOnSipSorcery
Password: PWonSipSorcery
Auth ID: BLANK

Setup Sip Account on Sip Sorcery as per directions. When I click Refresh under SIP Bindings it says Transferring data from www.sipsorcery.com for a long time but nothing ever comes up at the bottom of the browser.

In the log area is says
0 SIP Bindings are registered.
Bindings successfully loaded.

HELP,
Mike

msiam · Post by **msiam** » Wed Jul 22, 2009 1:52 am

Hey Mike.. did you read above?? It dont work..

noetic1 · Post by **noetic1** » Wed Jul 22, 2009 1:52 am

You missed the post just before yours from laserjobs.

MagicJack has blocked the sipsocery.com IP address so you'll never be able to register from sipsorcery to Majicjack.

djvpuls · Post by **djvpuls** » Tue Oct 12, 2010 11:53 am

Isn't there away around the block? Couldn't you use a forwarding url or something? I'm not sure how that would work forwarding to different ports... Dose anyone else know how to do this?

Anyways you could probably set up a local sipsorcery server (I'm not sure if magicjack is supported by the local sipsorcery server, but that would be just like running mjmd5.exe and you would have to have your computer on alll the time for your phone to work... ug

kashu · Post by **kashu** » Mon Oct 18, 2010 6:40 am

Guys, i tried to make a new account but it is not allowing any new users. I was wandering if someone can send me the invite code so i can register at the site..... kashif(AT)ibrainworld.net
I will appreciate all the help. thanks

Moe_Ale · Post by **Moe_Ale** » Thu Oct 21, 2010 1:00 pm

I just retrieved my MJ paswword and changed it in the PAP2t. I am not sure how I am back up and running. here is a screen shot of the PAP2t home page.

http://i1014.photobucket.com/albums/af2 ... unning.jpg

cucu007 · Post by **cucu007** » Thu Oct 21, 2010 11:28 pm

Moe_Ale wrote:I just retrieved my MJ paswword and changed it in the PAP2t. I am not sure how I am back up and running. here is a screen shot of the PAP2t home page.

http://i1014.photobucket.com/albums/af2 ... unning.jpg

I am having problems receiving calls, they are going straight to voicemail. I can make calls using the phone, my device is a PAP2T also, any ideas about this. Thank you.

Moe_Ale · Post by **Moe_Ale** » Thu Oct 21, 2010 11:33 pm

cucu007 wrote:
Moe_Ale wrote:I just retrieved my MJ paswword and changed it in the PAP2t. I am not sure how I am back up and running. here is a screen shot of the PAP2t home page.

http://i1014.photobucket.com/albums/af2 ... unning.jpg
I am having problems receiving calls, they are going straight to voicemail. I can make calls using the phone, my device is a PAP2T also, any ideas about this. Thank you.

OMG, I just tried to call myself and it went straight to voice mail.

I would not have know if you would not have mentioned it. how come I was able to call/receive on my EVO using the android app? but not on the PAP2t? hmmm

Edit: I have tried to call my MJ again and I was able to receive incoming calls on my ATA.

cucu007 · Post by **cucu007** » Thu Oct 21, 2010 11:38 pm

Moe_Ale wrote:
cucu007 wrote:
Moe_Ale wrote:I just retrieved my MJ paswword and changed it in the PAP2t. I am not sure how I am back up and running. here is a screen shot of the PAP2t home page.

http://i1014.photobucket.com/albums/af2 ... unning.jpg
I am having problems receiving calls, they are going straight to voicemail. I can make calls using the phone, my device is a PAP2T also, any ideas about this. Thank you.
OMG, I just tried to call myself and it went straight to voice mail. I would not have know if you would not have mentioned it. how come I was able to call/receive on my EVO using the android app? but not on the PAP2t? hmmm

Edit: I have tried to call my MJ again and I was able to receive incoming calls.

I hope we can come up with a solution to this soon, My ATA is working but calls are going straight to voicemail Please shine some light if you get to fix this.

magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

ATAs working again using sipsorcery.com

"registration to udp xxx.xxx.xxx.xxx:5070 timed out&quo

Definitely a problem with sipsorcery

Invite Code for Sipsocery.com ?