Mj was working fine until they shoved upgrade down my throat.
Now, if I plug in or hit autorun, it just runs the upgrade again, says I haven't plugged it in and dies.
I had to buy a new usb card because of their bad reg entry and tired affinity to old usb ports. Now this. crap.
I need my $59 back to put toward a ooma. Cause I know wiping it and running upgrade aint going to help it. It is some crap they forgot to wipe from registry and broke hell out of it. Tired of problems and only tap tap support.
They need a message board or email support. We don't have hours trying same old crap over and oover.
upgrade broke mj
Moderators: Bill Smith, Pilot
-
enjoythemusic
- magicJack Apprentice
- Posts: 29
- Joined: Tue Jan 13, 2009 4:21 am
Re: upgrade broke mj
Upgrade broke mine too
If you use the SEARCH function here and look up NO SERIAL NUMBER PASSED thread you will see the saga.
Looks like they CAN fix it! See:
www.phoneservicesupport.com/no-serial-n ... 87-15.html
If you use the SEARCH function here and look up NO SERIAL NUMBER PASSED thread you will see the saga.
Looks like they CAN fix it! See:
www.phoneservicesupport.com/no-serial-n ... 87-15.html
-
City Builder
- MagicJack Contributor
- Posts: 70
- Joined: Sat Oct 04, 2008 12:40 am
It broke mine today too. Now I rebooted, MJ goes to start then tells me it's upgrading then tells me Warning plug MJ into USB, which of course it is.
I contacted "support" which told me he was refreshing my connection to the MJ servers on his end, told me to unplug cable modem and router, wait 3 minutes, then start upgrade again.
Tried that, still get told that MJ is not plugged into the USB.
WTH?
Resolution: They stopped pumping out the upgrade later that afternoon. Once they stopped pushing the upgrade, the MJ reinstalled like it should and has been working fine. So I've got my MJ back (un-upgraded) and working fine. If they push that same upgrade out again and it messes up MJ again, I'm done with it.
I contacted "support" which told me he was refreshing my connection to the MJ servers on his end, told me to unplug cable modem and router, wait 3 minutes, then start upgrade again.
Tried that, still get told that MJ is not plugged into the USB.
WTH?
Resolution: They stopped pumping out the upgrade later that afternoon. Once they stopped pushing the upgrade, the MJ reinstalled like it should and has been working fine. So I've got my MJ back (un-upgraded) and working fine. If they push that same upgrade out again and it messes up MJ again, I'm done with it.
Last edited by City Builder on Sat Aug 01, 2009 6:27 pm, edited 1 time in total.
fan blade sound
Got back from vacation. Still down, upgrades didn't work, working new and old upgrade. I did a format of the usb card, then ran upgrade again. Fixed. Now, this verifies the problem is on their software.
Now problem with new software is sound becomes like talking into a fan. Very regular and rapid garble, not network related at all. This happens after 2 or three calls in middle of call. The unacceptable work around is to restart mj via menu.
Now problem with new software is sound becomes like talking into a fan. Very regular and rapid garble, not network related at all. This happens after 2 or three calls in middle of call. The unacceptable work around is to restart mj via menu.