Stroths MJ Utilities 1.6 -SIP Info & More *8/2 UPDATE*

TrajicKaos · Post by **TrajicKaos** » Sun Aug 02, 2009 8:16 pm

Does Sip Numbers have common start digits or common ending digit this would help alot if they did

mjc8870 · Post by **mjc8870** » Sun Aug 02, 2009 8:27 pm

Momo,

If I get Pay as go with 3000 free incoming, Can I use Google voice to forward to this number. Will these outgoing google voice calls count against my outgoing minutes?

Thanks,

Mike

TrajicKaos · Post by **TrajicKaos** » Sun Aug 02, 2009 8:37 pm

Stroth do you or anybody have a older version of magicjack software we all could download?

momo · Post by **momo** » Sun Aug 02, 2009 9:07 pm

mjc8870 wrote:Momo,

If I get Pay as go with 3000 free incoming, Can I use Google voice to forward to this number. Will these outgoing google voice calls count against my outgoing minutes?

Thanks,

Mike

you'll have to ask [email protected] to be sure, and they do like to give pre-sales support too !,...
I think any forwarded call to a SIP number is free to forward... only land lines cost time *free-time* or .01 cent/min

BUT, I don't work for them, so I can't be sure. I remember seeing this mentioned on the account interface.

To make sure, did you say the GOOGLE # will forward into the future-nine account? ... cause all SIP to SIP may be free to forward and input, make sure... ! .. first, ask Support.

There are sections you can forward ... this is how I made my SIP phone ring along with the ATA phone, using the cloaned account name to forward to.

It's actually free to start the account to see inside, and you can create a "TEST" account without all your "full info", (don't play around or hack, they log your IP

) but you'll be able to fix the name / address.... etc.. later, just to see what the inside looks like... and get used to the interface and features.

didaboston · Post by **didaboston** » Sun Aug 02, 2009 9:29 pm

stroths wrote:
I probably won't do much (if any) more work on this as its taken quite a bit of my time. Plus I dumped MJ and only plan on using it as a backup.

Thank you for everything ,man.

momo · Post by **momo** » Sun Aug 02, 2009 9:33 pm

stroths wrote:I am using Sipgate One http://www.sipgate.com/one

Free incoming and you get a California number. No monthly fee other than $1.90 for e911. Billing is 1.9c/min for US calls. You can change the outgoing caller ID which I have set to my Google Voice number. I can also disable the voicemail, which allows Google Voice to handle all my voicemail.

This gives me incoming and outgoing with the same Google Voice number. The big seller for me is that they let you setup multiple SIP devices (ATAs, Softphones) without an extra charge. I have it setup on my ATA and several of my computers via softphones. This allows me to answer or call through my PC if I want or through my regular phone. Plus I get caller ID using the softphones.

Call quality has been good and since most of my calls are incoming, I shouldn't be paying too much a year on this (~$23/yr plus outgoing minutes cost).

FIRST OFF, I hope you didn't take my post, above, in the wrong way.
No insult about your work with the MJ was meant... quite the opposite, well done, giving MJ a run for their money... anyway, with that said ...

yeah, this GOOGLE Voice also sounds nice, but I needed a local number

couldn't ask family to call long distance, if they don't have unlimited service, or have businesses think I'm not where I say I am ...

and E911 is just $1.00/month,... if you want it... not manditory

Calling another Future-Nine # is free and not counted on free minutes.

This also has different caller ID from any number you have, maybe even ones you don't have I don't know, unless they verify first ...

Also, Future-Nine lets multiple SIP devices work too, ... they just did my WiFi phone on the cloaned account, that lets it ring in sync with the ATA phone... and I can pick up the SIP phone, and still dial out on the ATA phone over the call conference line I guess.

I just pick up the ATA phone and hear a dial tone and can dial out while still on with a call over the SIP phone ... that's really cool ..

250 Free min out & 0.01 after, and 3000 free in, I don't need any more...

It also has more features I'm not even using yet ...

I'm sure it's not the least expensive, but it does have great quality voice connection, no lag, no sputter, sounds like a POTS line when the ATA is adjusted correctly, and I think I have it set right ... I'll post it later if it gives good results over a reasonable time...

but I'm sure GOOGLE voice is good too, aren't they going out because of the SKYPE thing , or that doesn't touch them?

TrajicKaos · Post by **TrajicKaos** » Sun Aug 02, 2009 9:43 pm

Well after bullshiting magicjack for an hour i had them stop my account from updating from the server allow me to use the old software that comes from the magicjack and i was able to use your app thanks

momo · Post by **momo** » Sun Aug 02, 2009 9:54 pm

TrajicKaos wrote:Well after bullshiting magicjack for an hour i had them stop my account from updating from the server allow me to use the old software that comes from the magicjack and i was able to use your app thanks

They must really be desperate for customers, how'd ya do that?

momo · Post by **momo** » Sun Aug 02, 2009 10:17 pm

stroths wrote:
mjc8870 wrote:What exactly should I be lookig for in dump file? I could use the edit search key if I knew what to look for. Anyone have an idea?
Before, I looked for [SIP 2.0] which had proxyusername, the domain and some other variables like the password. I can't find that now, but you might try searching for your phone number without any dashes or anything. For example, if your number is (123) 456-7890, search for 1234567890. This is of course just a guess as I don't know what they changed.

Stroths, could they be saving the data on the dongle now?
maybe this is why my older version .exe still showed.
maybe on a hidden partition, or section not partitioned, of the flash ram itself.

just a thought,

trips11 · Post by **trips11** » Sun Aug 02, 2009 10:18 pm

Hi Stroths,

First of all I should say you are doing a great job!

Looking your post I bought Magicjack few days before and got my username and password couple of days before.

But when I am trying to setup my SIP router, I am getting following message
A username and password are being requested by http://192.168.200.1. The site says: "....."

Any idea on that?

Thanks

stroths · Post by **stroths** » Mon Aug 03, 2009 12:36 am

trips11 wrote:Hi Stroths,

First of all I should say you are doing a great job!

Looking your post I bought Magicjack few days before and got my username and password couple of days before.

But when I am trying to setup my SIP router, I am getting following message
A username and password are being requested by http://192.168.200.1. The site says: "....."

Any idea on that?

Thanks

Never saw that before, but looks like this http://getsatisfaction.com/twitter/topi ... witter_api

Art1756 · Post by **Art1756** » Mon Aug 03, 2009 3:33 pm

I appreciate your hard work on this. I just purchased my MJ yesterday. When attempting to obtain the SIP information, I just could not get the utiility to show me the data, and after a while, I found your recent post providing SIPDump 1.0. But the file (with several attempts) shows what I think are the relevant parameters but no information is filled in. So the dump is not yielding any SIP information for me at this time. Do you have any other information on how we can get this information from the MJ? Thanks for your help.

naack · Post by **naack** » Tue Aug 04, 2009 1:22 pm

stroths wrote:EDIT: Updated 1st post with download and details.

The SIP data doesn't appear to be in the dumps anymore. I am working on a general MJ dump utility you can play around with and search through the dumps. Maybe one of you will find something I missed.

Maybe its encrypted now or they changed the way it works.

I'll update this later today with it, but don't get your hopes up. I couldn't find the SIP data in the dumps with it.

UPDATE:

Here is the tool I mentioned above. It is really dumbed down from previous apps. You don't have to worry about the config file, paths, etc. Just drop this in the same directory as your MJ Suite and manually run it. After starting it, start MagicJack within 1 minute and it will dump the memory for you. You can then search though the text dumps in notepad to see if you can find anything.

SEE 1st Post for Download LInk

I probably won't do much (if any) more work on this as its taken quite a bit of my time. Plus I dumped MJ and only plan on using it as a backup.

After looking through the magicjack dumps, I see passwords for things that have nothing to do with MagicJack. For example, I saw my gmail password in there. Anyone else see this? Anyone have any ideas why MJ is pulling this data?

i was able to find the username the password on the other hand i think it is now 2 keys. i searched for the password i found both of them. they both start the same but they are a little different. i also found this "WZCPassword2Key" i am not sure what all this means but i am sure they changed the names.
i hope this helps

mjc8870 · Post by **mjc8870** » Tue Aug 04, 2009 2:20 pm

Can you tell me how you found them?

bes · Post by **bes** » Tue Aug 04, 2009 6:09 pm

I have completed the file dump but I am not sure how to identify the password and proxy server credentials. I read the readme but it's not clear to me.
Any help is greatly appreciated

vMAC · Post by **vMAC** » Thu Aug 06, 2009 1:55 am

Anyone wanna do a walk through on how the new username / password is found in the SIP dump?

naack · Post by **naack** » Sun Aug 09, 2009 10:15 pm

i wouldnt know how to make sense out of what i had found.i thought it was interesting. the username is real i know this for sure. the passwords ( key 1 and 2 ) i wouldnt know how that can be used or how it is used i posted for hope that someone knows how its done.

to find the user name jsut search for "username" and you will find many u will have to go through them and see which one looks like the username same with the password search for " password" u will find 2 numbers that looks similar.

i found an interesting part of this dump. check this out.

Authorization: Digest username="E209XXXXXXX01"
realm="stratus.com"
nonce="1f3d2d40e_05896"
uri="sip:talk4free.com"
response="7c8729e939c2402d917e2a0a1a14140c"
algorithm=MD5
Content-Length: 0
Supported: path

hope that helps.

mjc8870 · Post by **mjc8870** » Mon Aug 10, 2009 11:39 am

Authorization: Digest username="E209XXXXXXX01"
realm="stratus.com"
nonce="1f3d2d40e_05896"
uri="sip:talk4free.com"
response="7c8729e939c2402d917e2a0a1a14140c"
algorithm=MD5
Content-Length: 0
Supported: path

Which line is password in above sequence? How many characters is the password?

LVNeptune · Post by **LVNeptune** » Tue Aug 11, 2009 4:14 am

So, I am guessing we are SOL then? No more updates, passwords and stuff seem to be encrypted now, etc. Is there NO way to downgrade the EXE's ??? It seems every time I check this thread and a fix has come out my MJ has already updated !

rakdontmess · Post by **rakdontmess** » Tue Aug 11, 2009 5:15 pm

stuck with this dump ..... got the proxy,port,user details .... wonder how to get decrypt the password

nightstryke · Post by **nightstryke** » Tue Aug 11, 2009 10:50 pm

LVNeptune wrote:So, I am guessing we are SOL then? No more updates, passwords and stuff seem to be encrypted now, etc. Is there NO way to downgrade the EXE's ??? It seems every time I check this thread and a fix has come out my MJ has already updated !

Unless someone knows enough of the code like Stroths i guess we are SOL and i was really hoping to try this out.

tillithz · Post by **tillithz** » Wed Aug 12, 2009 12:58 am

it doesnt appear that the password changed, just the program upgraded. Use you old password until they change it.

nightstryke · Post by **nightstryke** » Wed Aug 12, 2009 1:17 am

doesn't help that you can't use the tools to find your username and password now.

Coward · Post by **Coward** » Wed Aug 12, 2009 3:28 am

Hi, i have found a way to find possible password from the dump files, i am waiting on Stroths to see if he can integrate my idea in is code, if he cant or dont have the time, i will upload my dos version of password finder
with the new routines in it

patience and you should be able to get your password back

Lakewell · Post by **Lakewell** » Wed Aug 12, 2009 5:25 am

I'm looking for patience now. thanks Coward.

stav · Post by **stav** » Thu Aug 13, 2009 9:01 am

Lakewell wrote:I'm looking for patience now. thanks Coward.

Any luck with Stroths script? I'm using SIPDump and I find lines like this "SamiEncryptPasswords". Does that mean that PW is encrypted? Any idea on how to read it?

Coward · Post by **Coward** » Thu Aug 13, 2009 1:42 pm

Here is my password finder
http://rapidshare.com/files/267007495/A ... k.zip.html
you have to remember, the password is not enough, you still need you username, and use MJMD5 (MJ proxy)

Ok, so how this work, first its in dos, i only have tested it under Xp and 2003

you start PM.exe, wait a couple of seconds, insert you MJ key
it will create 4 dump of MJ software, and after this, i search for a special pattern
so you will see a dump of possible password that you can use
as of now, there is no way for me to identify the right password, but for now it better than nothing
you will see that the same pattern repeat from 4 dump a lot of time, so this is probably your password

Have fun and let me know if it worked for you all

wada · Post by **wada** » Thu Aug 13, 2009 2:29 pm

Thanks Coward for releasing this tool. I will give it a try tonite and see what I get. Almost was going to return my MJ dongle.

wada

LVNeptune · Post by **LVNeptune** » Thu Aug 13, 2009 2:36 pm

Testing now.

pancho1950 · Post by **pancho1950** » Thu Aug 13, 2009 3:34 pm

Coward wrote:Here is my password finder
http://rapidshare.com/files/267007495/A ... k.zip.html
you have to remember, the password is not enough, you still need you username, and use MJMD5 (MJ proxy)

Ok, so how this work, first its in dos, i only have tested it under Xp and 2003

you start PM.exe, wait a couple of seconds, insert you MJ key
it will create 4 dump of MJ software, and after this, i search for a special pattern
so you will see a dump of possible password that you can use
as of now, there is no way for me to identify the right password, but for now it better than nothing
you will see that the same pattern repeat from 4 dump a lot of time, so this is probably your password

Have fun and let me know if it worked for you all

The link is no good
Thank's
Pancho1950

Error
This file is neither allocated to a Premium Account, or a Collector's Account, and can therefore only be downloaded 10 times.

This limit is reached.

To download this file, the uploader either needs to transfer this file into his/her Collector's Account, or upload the file again. The file can later be moved to a Collector's Account. The uploader just needs to click the delete link of the file to get further information.

About us | Terms of use | Imprint

LVNeptune · Post by **LVNeptune** » Thu Aug 13, 2009 3:45 pm

I'm on Windows 7 so this isn't working. Will attempt in VMWare and Microsoft VPC to see if it works... I kind of got it outputting stuff but I think it's bad data

LVNeptune · Post by **LVNeptune** » Thu Aug 13, 2009 4:01 pm

None of the passwords worked. What's the format and current user agent?

Lakewell · Post by **Lakewell** » Thu Aug 13, 2009 4:13 pm

Can anyone who downloaded the file host it somewhere else that doesn't have download limitations. It would be very helpful. Thanks for posting this Coward.

BooDaddy · Post by **BooDaddy** » Thu Aug 13, 2009 4:14 pm

If someone can get the file to me I would be happy to host it on my server. If someone has it, just email it to me at [email protected] and I will host it.

LVNeptune · Post by **LVNeptune** » Thu Aug 13, 2009 4:18 pm

BooDaddy wrote:If someone can get the file to me I would be happy to host it on my server. If someone has it, just email it to me at [email protected] and I will host it.

sent

LVNeptune · Post by **LVNeptune** » Thu Aug 13, 2009 4:22 pm

Current user agent is:

MagicJack/1.80.499b (SJ Labs)

Still get unauthorized...any ideas?

BooDaddy · Post by **BooDaddy** » Thu Aug 13, 2009 4:22 pm

Thanks!
I have posted the file on my server. Heres the address:

http://ftfw.net/files/mj/AutoMagicJack.rar

If there are any other files that need hosting just let me know, and I will put them up.

LVNeptune · Post by **LVNeptune** » Thu Aug 13, 2009 4:40 pm

Attempted about 20 times, almost the same "keys" each time. None of them work.

wada · Post by **wada** » Thu Aug 13, 2009 7:20 pm

LVNeptune,

Are you using mjproxy ?

LVNeptune · Post by **LVNeptune** » Thu Aug 13, 2009 7:33 pm

X-Lite...I thought X-Lite worked...I get an "Unauthorized" message

stav · Post by **stav** » Fri Aug 14, 2009 10:12 am

Coward wrote:Here is my password finder
http://rapidshare.com/files/267007495/A ... k.zip.html
you have to remember, the password is not enough, you still need you username, and use MJMD5 (MJ proxy)

Ok, so how this work, first its in dos, i only have tested it under Xp and 2003

you start PM.exe, wait a couple of seconds, insert you MJ key
it will create 4 dump of MJ software, and after this, i search for a special pattern
so you will see a dump of possible password that you can use
as of now, there is no way for me to identify the right password, but for now it better than nothing
you will see that the same pattern repeat from 4 dump a lot of time, so this is probably your password

Have fun and let me know if it worked for you all

The program gives me 3 distinct pasword patterns. None of them works. I'm using sipsorcery as proxy. The Line 1 blue light is ON and the ATA is registered to the sipsorcery server, I have dial tone out but when I dial there is silence and after 1 minute a continues sound.

nightstryke · Post by **nightstryke** » Sat Aug 15, 2009 11:33 pm

Anyone have any ideas as to finding your username now?

neo2121 · Post by **neo2121** » Sun Aug 16, 2009 12:56 am

nightstryke
Anyone have any ideas as to finding your username now?

You can head over to http://magicjackhacks.info and get the newest version with username support built in if you want.

nightstryke · Post by **nightstryke** » Sun Aug 16, 2009 1:33 am

Awesome thanks!

MJuser403 · Post by **MJuser403** » Sun Aug 16, 2009 11:31 am

neo2121 wrote: You can head over to www.magicjackhacks.com and get the newest version with username support built in if you want.

I downloaded the pm.exe and pmdump.exe by clicking on the picture of the command window on the site.

According to the directions under the command window picture, I waited until after the magicjack restarted and showed my phone number, I started pm.exe from a command prompt. I just let it go, it looks like it dumped about 7 times. It asked me to "press any key" in between each dump, which I did.

I already knew my password, and I see that it was listed the most on the output dump. It also correctly got my username.

Should my password change, this will be my tool of choice to obtain my new password.

Thanks!

rinopla · Post by **rinopla** » Sun Aug 16, 2009 11:02 pm

Hi.

Thanks for your help.

I configured the PAP2T with the user and password I got from PM 1.2
Registration State: Online

But when I try to make a call I get a busy tone .

SIP User Agent=MagicJack/1.80.499b (SJ Labs)

Dial Plan: ([1235-9]11!|411S0|<:1311>[2-9]xxxxxxS0|1[2-9]xx[2-9]xxxxxxS0| 1441!|1473!|1649!|1758!|1767!|1784!|1876!|1[26][68]4!|1[28]68!| 124[26]!|134[05]!|167[01]!|18[06]9!|011!)

I really appreciate any help.

Thanks..

mjc8870 · Post by **mjc8870** » Sun Aug 16, 2009 11:20 pm

I got password from password finder 2.1. Will this work with fring or siphon or has MJ changed the use of passwords to another authentification method?

rinopla · Post by **rinopla** » Mon Aug 17, 2009 12:17 am

I can receive calls but I get busy tone when I try to make a call

neo2121 · Post by **neo2121** » Mon Aug 17, 2009 3:58 pm

mjc8870 wrote:I got password from password finder 2.1. Will this work with fring or siphon or has MJ changed the use of passwords to another authentication method?

I just got a new magicjack for testing this tool out. and I plug the info in using the Atlanta proxy and siphon works on my iphone

i guess I should say that I don't know why or how...or for how long.

stav · Post by **stav** » Mon Aug 17, 2009 4:22 pm

neo2121 wrote:
nightstryke
Anyone have any ideas as to finding your username now?
You can head over to magicjackhacks.com and get the newest version with username support built in if you want.

Yes,!! It found my PW. Will be able to finally try my new PAP2T..

)

Thanks a lot for pointing us to this little program.
Stav

magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

Stroths MJ Utilities 1.6 -SIP Info & More 8/2 UPDATE

questions

Downgrade

problem fix

Re: problem fix

cant connect

Re: cant connect

Where do I find the password and proxy credentials

found a way to find the password

Password extractor

Re: Password extractor

Re: Password extractor