Please help with router config--Doesn't need MJPROXY?!?

kkroo · Post by **kkroo** » Tue Apr 13, 2010 12:03 pm

UPDATE--PLEASE READ 2nd POST

Hi,

I am trying to configure MJ on my vt2442 which I unlocked from vonage. I got my SIP settings as per instructions, and I even got MJ working from X-lite using the settings.

Now I came to do the setup on the modem, and I could never get it to connect even though I used the same settings as X-Lite. I even tried downloading mjproxy, and it didnt work.

I downloaded the local version of MJPROXY and I couldn't get it to even work with X-Lite, I installed the router version through the router SSH, but still nothing.

All I get is:

2010:4:13:16:0 register sip phone *832268344101 (LINE 1): FAILED

Has anyone got a clue how to get this thing up and running (with or without MJPROXY on the router)?

Any help would be GREATLY appreciated.

kkroo · Post by **kkroo** » Tue Apr 13, 2010 7:22 pm

[CONTENT DELETED]

Read the next post

kkroo · Post by **kkroo** » Wed Apr 14, 2010 1:44 pm

I have figured part of it out. My account doesn't need MJMD5. I can connect directly to the MJ proxies WITHOUT having to use MJMD5. I have successfully connected to MJ on X-lite without it, along with my HTC HD2. So i tried to change my router settings accordingly, and I get a dialtone, but I cant dial a number. Here is my voice log:

Code: Select all

000182164 - Contact: {sip:*[email protected]:5070;transport=UDP}
0000182164 - Expires: 3
0000182164 - Content-Length: 0
0000182164 - 
0000192200 - SSMU: 0  ---} Message Sent: 
0000192200 -  REGISTER sip:SYFM;transport=UDP SIP/2.0
0000192200 - From: {sip:*832268XXXX01@SYFM;transport=UDP};tag=c02a8c0-13ce-4bc5fbed-58e59-6b9dae18
0000192200 - To: {sip:*832268XXXX01@SYFM;transport=UDP}
0000192200 - Call-ID: c02a8c0-13ce-4bc5fa81-3cb-3fd66e7d
0000192200 - CSeq: 19 REGISTER
0000192201 - Via: SIP/2.0/UDP 192.168.2.12:5070;branch=z9hG4bK-4bc5fbed-58e59-1bbea071
0000192201 - Max-Forwards: 70
0000192201 - Supported: replaces,timer,100rel
0000192201 - User-Agent: MagicJack/1.92.530e (SJ Labs)
0000192201 - Contact: {sip:*[email protected]:5070;transport=UDP}
0000192201 - Expires: 3
0000192201 - Content-Length: 0
0000192201 - 
0000202228 - SSMU: 0  ---} Message Sent: 
0000202228 -  REGISTER sip:SYFM;transport=UDP SIP/2.0
0000202228 - From: {sip:*832268XXXX01@SYFM;transport=UDP};tag=c02a8c0-13ce-4bc5fc01-5dcb5-19cb93c4
0000202228 - To: {sip:*832268XXXX01@SYFM;transport=UDP}
0000202228 - Call-ID: c02a8c0-13ce-4bc5fa81-3cb-3fd66e7d
0000202228 - CSeq: 20 REGISTER
0000202228 - Via: SIP/2.0/UDP 192.168.2.12:5070;branch=z9hG4bK-4bc5fc01-5dcb5-104bd2ad
0000202228 - Max-Forwards: 70
0000202229 - Supported: replaces,timer,100rel
0000202229 - User-Agent: MagicJack/1.92.530e (SJ Labs)
0000202229 - Contact: {sip:*[email protected]:5070;transport=UDP}
0000202229 - Expires: 3 
0000202229 - Content-Length: 0
0000202229 -

What is interesting is that my router does this:

To: {sip:*832268XXXX01@SYFM;transport=UDP}

It replaces the "E" in the username with a "*" and the "SYFM" is the last four digits of my password.

Here is my new config I am using:

Code: Select all

<PORT_1_CONFIG>

<RING_VOLTAGE>90</RING_VOLTAGE>
<RING_TYPE>SINUSOIDAL</RING_TYPE>
<RING_DC_OFFSET>0</RING_DC_OFFSET>
<RING_FREQUENCY>20</RING_FREQUENCY>
<ON_HOOK_VOLTS>48</ON_HOOK_VOLTS>
<OFF_HOOK_CURRENT>23</OFF_HOOK_CURRENT>
<RX_ON_HOOK_DGTL_GAIN>-6</RX_ON_HOOK_DGTL_GAIN>
<TX_ON_HOOK_DGTL_GAIN>6</TX_ON_HOOK_DGTL_GAIN>
<RX_OFF_HOOK_DGTL_GAIN>-6</RX_OFF_HOOK_DGTL_GAIN>
<TX_OFF_HOOK_DGTL_GAIN>6</TX_OFF_HOOK_DGTL_GAIN>
<COUNTRY_SETTINGS></COUNTRY_SETTINGS>
<EMGNCY_CALL>1</EMGNCY_CALL>
<VRMSG_ENABLE></VRMSG_ENABLE>
<VRMSG_REPEAT_COUNT></VRMSG_REPEAT_COUNT>
<VRMSG_REPEAT_INTERVAL></VRMSG_REPEAT_INTERVAL>
<CPC_MODE></CPC_MODE>
<HANGUP_WAIT>3</HANGUP_WAIT>
<FCODE_IP_DISPLAY></FCODE_IP_DISPLAY>
<REPORT_RTCPXR_TYPE></REPORT_RTCPXR_TYPE>
<REPORT_RTCPXR_USER_INFO></REPORT_RTCPXR_USER_INFO>
<REPORT_RTCPXR_ADDR></REPORT_RTCPXR_ADDR>
<P_PREFERRED_ID></P_PREFERRED_ID>
<P_FROM></P_FROM>
<TONE_PLAY></TONE_PLAY>
<TONE_PLAY_ID></TONE_PLAY_ID>

<DIGIT_MAP>*xxT|*1xx|[349]11|1xxx[2-9]xxxxxx|[2-9]xxxxxxT|[2-9]xxxxxxxxx|011x.T</DIGIT_MAP>
<TERM_DIGIT>#</TERM_DIGIT>
<PAR_DIGIT_TIMER>16</PAR_DIGIT_TIMER>
<CRIT_DIGIT_TIMER>4</CRIT_DIGIT_TIMER>
<DIAL_TIMEOUT>30</DIAL_TIMEOUT>
<PREF_VOICE_CODEC>PCMU</PREF_VOICE_CODEC>
<PREF_FAX_CODEC>PCMU</PREF_FAX_CODEC>
<PREF_MODEM_CODEC>PCMU</PREF_MODEM_CODEC>
<PREF_PTIME_VOICE>20</PREF_PTIME_VOICE>
<PREF_PTIME_DATA>20</PREF_PTIME_DATA>
<CID_NAME>E832268XXXX01</CID_NAME>
<CID_NUMBER>E832268XXXX01</CID_NUMBER>
<AUTH_USER_NAME>E832268XXXX01</AUTH_USER_NAME>
<AUTH_USER_PASSWD>XXXXXXXXLP1SH9SYFM</AUTH_USER_PASSWD>
<PROXY_FQDN>proxy01.chicago.talk4free.com</PROXY_FQDN>
<PROXY_PORT>5070</PROXY_PORT>
<REG_FQDN>proxy01.chicago.talk4free.com</REG_FQDN>
<REG_PORT>5070</REG_PORT>
<P_FROM></P_FROM>
<DIAL_IN_PLAR></DIAL_IN_PLAR>

<TLS_ENABLE>0</TLS_ENABLE>
<TLS_RECOVER_TO>0</TLS_RECOVER_TO>

<TLS_PROXY></TLS_PROXY>
<TLS_PROXY_PORT>5061</TLS_PROXY_PORT>

</PORT_1_CONFIG>

My SIP Config:

Code: Select all


<SIP_CONFIG>

<TIMER_T1>2000</TIMER_T1>
<TIMER_T2>4000</TIMER_T2>
<TIMER_T4>5000</TIMER_T4>
<TIMER_B>10000</TIMER_B>
<TIMER_D>32000</TIMER_D>
<TIMER_F>35000</TIMER_F>
<TIMER_H>32000</TIMER_H>
<TIMER_J>32000</TIMER_J>
<MAX_TRANSMISSIONS>4</MAX_TRANSMISSIONS>
<REG_EXPIRE_TIMER>3600</REG_EXPIRE_TIMER>
<REG_FAILRETRY_TIMER>20000</REG_FAILRETRY_TIMER>
<UDP_LISTEN_PORT>5070</UDP_LISTEN_PORT>
<TCP_LISTEN_PORT>5070</TCP_LISTEN_PORT>
<RTP_PORT_START>5004</RTP_PORT_START>
<RTP_PORT_END>5008</RTP_PORT_END>
<RTP_TOS>0xb8</RTP_TOS>
<SIG_TOS>0x68</SIG_TOS>
<SDP_CODEC_SELECTION>1</SDP_CODEC_SELECTION>
<SDP_HOLD0_ENABLE>1</SDP_HOLD0_ENABLE>
<TRUSTED_SIP_SOURCE>1</TRUSTED_SIP_SOURCE>
<SESSION_TIMER_SE>0</SESSION_TIMER_SE>
<SESSION_TIMER_MinSE>0</SESSION_TIMER_MinSE>
<PERIODIC_NTFY_INTERVAL>0</PERIODIC_NTFY_INTERVAL>
<SIP_TRANS_PROTOCOL>0</SIP_TRANS_PROTOCOL>
<UA_HEADER_ENABLE>1</UA_HEADER_ENABLE>
<UA_HEADER_INFO>MagicJack/1.92.530e (SJ Labs)</UA_HEADER_INFO>
</SIP_CONFIG>