SIPHON 2.3 RC1 working on iphone

madmox · Post by **madmox** » Fri Aug 13, 2010 12:58 pm

f38b8 wrote:Magicjack not working on iphone4 with Siphon-2.3rc4.deb software it say "service unavailable"
can somebody help me to fix this problem?

I'm having the same problem only 3g 4.0, did you fix it?
Thanks, Dave

neo2121 · Post by **neo2121** » Sat Aug 14, 2010 12:02 am

i can test on an iphone 4 on monday

Spider210 · Post by **Spider210** » Mon Aug 16, 2010 3:09 pm

neo2121 wrote:I have e-mailed the project owner for sipdroid and asked him if he would be interested in adding support for magicjack. I told him if he would magicjackhacks.net would make a donation to the project.

If the dev for sipdroid is interested and needs testers, send me a pm and i will participate.

danpaulson · Post by **danpaulson** » Sun Aug 22, 2010 5:54 pm

App is working on iPhone 4, but getting 'Credential failed to authenticate', freshly dumped password and all other info correct.

dell · Post by **dell** » Mon Aug 23, 2010 4:22 am

danpaulson wrote:App is working on iPhone 4, but getting 'Credential failed to authenticate', freshly dumped password and all other info correct.

I am facing with the same problem. If anyone gets it working on iPhone4 ... please let me know !!!!

manachinu · Post by **manachinu** » Mon Aug 23, 2010 5:27 am

Just put Siphon-2.3rc4.deb to
/private/var/root/Media/Cydia/AutoInstall
( Make sure your type exactly like above, especially the CAPPITAL Letter )
Reboot your device and it should work fine.

gavilaso · Post by **gavilaso** » Mon Aug 23, 2010 10:08 am

Just installed on my iPhone 4 4.0.1 and it is working FINE!!!!!!

Thanks!!!

sunny786 · Post by **sunny786** » Wed Aug 25, 2010 9:08 pm

Open WinSCP and login to your iPod Touch/iPhone
Put your .deb application file in the "private/var/tmp" folder
In WinSCP hold Ctrl and press T, go forward with the warnings and type this command
dpkg -i /tmp/Siphon.deb (make sure you type the correct app name)
Installation of the file will start
Now respring your iPod Touch/iPhone

paulito · Post by **paulito** » Tue Sep 07, 2010 11:21 am

Does anyone know how to install 2 copies of the siphon app? Just so I can use it with 2 voip providers? Its a hassle re-typing all the settings, username, password, etc everytime I need to switch providers. Much thanks!

noneyayaya · Post by **noneyayaya** » Sun Sep 12, 2010 8:25 pm

I personally own two magic jacks. I have used mdmj5 on multiple routers flashed with ddwrt firmware. Also I have used mjmd5 on a windows pc. One of my magicjacks require mjmd5 authentication. The other does not require mjmd5 WHATSOEVER. So those of you that can get siphon working on your jailbroken Iphone must NOT have a majicjack with mjmd5 authentication. Otherwise I am missing something but when I run a ddwrt flashed router with mjmd5 or a pc with mjmd5 running and point siphon to that ip i.e. 192.168.1.1:5070 for the server setting of siphon it works EVERYTIME. But when I try to use any combination of proxy01.yourcity.talk4free.com:5070 or xxx.xx.xxx:5070 it just DOESNT WORK. Which tells me siphon doesnt have mdmj5 built in or I have a super duper one of a kind nonworking iphone incompatible with siphon's supposed mjmd5 built in switch. Hard to belive that could be the case. So what is needed in my opinion is either mjmd5 built in to siphon OR

Can someone make a mjmd5 app or can someone please make this into a deb? So we can install it on the iphone? I have what I belive the source file here from a .ipkg extension. I belive if it is converted to .deb we can install it onto a iphone then run mjmd5 directly on the iphone just like we can run it on the ddwrt router firmware. Please port this asap then we can have magic jack on the iphone using siphon. I have used siphon on my ddwrt flashed router with mjmd5 and it works perfectly so why wouldn't it on a iphone if we had the deb! There has to be a linux guru out there that can do this easily! Or a mac nut that can whip up a quick app that will give all of us somesweet ass mobile magicjack action!

http://www.mediafire.com/file/loh386e9z ... oxy_mipsel

Why isnt there a Iphone Magicjack Section?

I installed siphon from cydia first ver2. something I then used ssh into my iphone and installed 2.3rc4 overwriting 2. whatever. I then uninstalled siphon from cydia and reinstalled 2.3rc4 when I went into the settings of siphon all my settings were still there is this a bug that is preventing the mjmd5 from working? I dunno just a thought I just dont want to have to reinstall my iphone to 3.1.3 then jailbreak it again just to see if that is the issue. If your trying to do this for the first time I highly reccomend installing the app NOT FROM CYDIA but from here maybe this will help some:

http://code.google.com/p/siphon/

Once you have it on your iphone you can then use this command to install it

dpkg -i yourfilename.deb

Kenny2469 · Post by **Kenny2469** » Mon Sep 13, 2010 5:28 am

Ok, so I have finally got siphone 2.3rc4 working just fine with my jailbroken iphone 3g running 3.1.3 firmware...

Install it with winSCP as noted above...

In the iPhone settings icon, goto Siphon.

Account: E#########01 (#'s representing your 10 digit MJ#)
Password: Your 20 character MJ password retrieved from the process
Server: talk4free.com

(ADVANCED SETTINGS)
Reg timeout: 3600
Proxy Server: proxy1.washington.talk4free.com:5070
Enable Nat ((ON))
Auth Username: E##########01

MagicJack ((ON))

(PHONE SETTINGS)
Nothing changed

(NetworK)
Only changed Siphon over EDGE/3G ((ON))
--------------------------------------------------------------

Load Siphon, on the top left should show talk4free.com
and on the right should show CONNECTED

Dial your number and you're good to go...

And here's an interesting fact...
I made a call with Siphon on my iphone, and I could
simultaneously make another call from the magic jack phone itself,
thus making two separate calls at the same time...

neo2121 · Post by **neo2121** » Mon Sep 13, 2010 8:10 pm

noneyayaya wrote:I personally own two magic jacks. I have used mdmj5 on multiple routers flashed with ddwrt firmware. Also I have used mjmd5 on a windows pc. One of my magicjacks require mjmd5 authentication. The other does not require mjmd5 WHATSOEVER. So those of you that can get siphon working on your jailbroken Iphone must NOT have a majicjack with mjmd5 authentication. Otherwise I am missing something but when I run a ddwrt flashed router with mjmd5 or a pc with mjmd5 running and point siphon to that ip i.e. 192.168.1.1:5070 for the server setting of siphon it works EVERYTIME. But when I try to use any combination of proxy01.yourcity.talk4free.com:5070 or xxx.xx.xxx:5070 it just DOESNT WORK. Which tells me siphon doesnt have mdmj5 built in or I have a super duper one of a kind nonworking iphone incompatible with siphon's supposed mjmd5 built in switch. Hard to belive that could be the case. So what is needed in my opinion is either mjmd5 built in to siphon OR

Can someone make a mjmd5 app or can someone please make this into a deb? So we can install it on the iphone? I have what I belive the source file here from a .ipkg extension. I belive if it is converted to .deb we can install it onto a iphone then run mjmd5 directly on the iphone just like we can run it on the ddwrt router firmware. Please port this asap then we can have magic jack on the iphone using siphon. I have used siphon on my ddwrt flashed router with mjmd5 and it works perfectly so why wouldn't it on a iphone if we had the deb! There has to be a linux guru out there that can do this easily! Or a mac nut that can whip up a quick app that will give all of us somesweet ass mobile magicjack action!

http://www.mediafire.com/file/loh386e9z ... oxy_mipsel

Why isnt there a Iphone Magicjack Section?

I installed siphon from cydia first ver2. something I then used ssh into my iphone and installed 2.3rc4 overwriting 2. whatever. I then uninstalled siphon from cydia and reinstalled 2.3rc4 when I went into the settings of siphon all my settings were still there is this a bug that is preventing the mjmd5 from working? I dunno just a thought I just dont want to have to reinstall my iphone to 3.1.3 then jailbreak it again just to see if that is the issue. If your trying to do this for the first time I highly reccomend installing the app NOT FROM CYDIA but from here maybe this will help some:

http://code.google.com/p/siphon/

Once you have it on your iphone you can then use this command to install it

dpkg -i yourfilename.deb

Kind of hard to follow this post. It seems like you installed the wrong version and uninstalled it and installed the beta version off of the google code. There inst a need for someone to create an MJMD5 app to run on IOS because SIPHON dose this just fine. Its rare but some magicjacks dont require MJMD5. I have included Screen shots of a correct configuration you will need to substitute your information with mine. Remember that the password is case sensitive, also not all the user names end with 01. I hope this helps you out.

sandman2 · Post by **sandman2** » Mon Nov 22, 2010 1:09 pm

Kenny2469 wrote:Ok, so I have finally got siphone 2.3rc4 working just fine with my jailbroken iphone 3g running 3.1.3 firmware...

Install it with winSCP as noted above...

In the iPhone settings icon, goto Siphon.

Account: E#########01 (#'s representing your 10 digit MJ#)
Password: Your 20 character MJ password retrieved from the process
Server: talk4free.com

(ADVANCED SETTINGS)
Reg timeout: 3600
Proxy Server: proxy1.washington.talk4free.com:5070
Enable Nat ((ON))
Auth Username: E##########01

MagicJack ((ON))

(PHONE SETTINGS)
Nothing changed

(NetworK)
Only changed Siphon over EDGE/3G ((ON))
--------------------------------------------------------------

Load Siphon, on the top left should show talk4free.com
and on the right should show CONNECTED

Dial your number and you're good to go...

And here's an interesting fact...
I made a call with Siphon on my iphone, and I could
simultaneously make another call from the magic jack phone itself,
thus making two separate calls at the same time...

This thread is pretty old, does anyone know if this still works???

Mine stop working back in August!

sandman2 · Post by **sandman2** » Mon Nov 22, 2010 1:21 pm

Is this still working on 3G Iphones?

snowcrash · Post by **snowcrash** » Mon Nov 22, 2010 4:54 pm

I'd like to revive this thread. I've been trying to get the MJ to work with the latest build of Siphon with no luck. Getting a credentials failed to authenticate.
I know there's alot of talk about rotating passwords, but everytime I do a dump, I get the same password.
My settings are exactly like the screenshots from a few posts ago, and I've even fiddled with them some more with no luck.
Has anyone got this working as of late?
Thanks!!

neo2121 · Post by **neo2121** » Mon Nov 22, 2010 5:16 pm

nothing is working magicjack has changed the authentication process sorry.

AJCrowley · Post by **AJCrowley** » Thu Dec 09, 2010 8:09 pm

This stopped working for me the other day.

I checked, and sure enough, my password had changed.

Got the new password, plugged it into Siphon, still getting credential failed.

Bah!

Spider210 · Post by **Spider210** » Thu Dec 16, 2010 1:16 pm

AJCrowley wrote:This stopped working for me the other day.

I checked, and sure enough, my password had changed.

Got the new password, plugged it into Siphon, still getting credential failed.

Bah!

magicjack has changed the authentication process

magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

SIPHON 2.3 RC1 working on iphone

Install 2x siphon app

Iphone MJMD5

Re: Iphone MJMD5