DDWRT Version Of MJMD5

[maa]

can anyone shed some light on this?

It just stopped working yesterday all of the sudden.

I have not had any issues with it since January of 2009. I retrieved the password (It was different) and updated it on my dd-wrt router and PAP2t as well. It is still showing Registration State: Can't connect to login server.

I honestly ran out of options. Thanks in Advance.

[arcadia2uk]

Recent problem with ata users http://www.phoneservicesupport.com/do-n ... t9603.html There's no known cure for this yet.

[intenceice]

is it possible to have mmj5 running on my linksys router(dd-wrt) and use the pap2?

with that config i could use a regular hardline phone to the pap2 or sipphon wireless right?


is the proccess as easy as follow instructions to install on DD-wrt then follow instructions to install on PAP2 and BAM im done?

please advise thanks

[stav]

is it possible to have mmj5 running on my linksys router(dd-wrt) and use the pap2?

with that config i could use a regular hardline phone to the pap2 or sipphon wireless right?


is the proccess as easy as follow instructions to install on DD-wrt then follow instructions to install on PAP2 and BAM im done?

please advise thanks

dude, just read the link posted by arcadia2uk just above yours, mjmd5/ata dont work (well, most of them, the remaining its a matter of time) cuze rotating passwords

[naack]

problem is the mjmd5 needs to stop when u disconnect or close the sip app.
and stoart again when u're going to connect. thats why people are having so much trouble with it.
is there a way to fix it with a script?

[JOFTAA]

I am so close I can taste it.

I have it working. I have dial tone and I can make calls. I can also receive calls.

The problem is that the router does not seem to run the command automatically.

My screen looks like this:



My password is there, I just edited it out for this screen shot.

Should the command not be running on its own?

If I copy the command into the COMMAND window above and then click on RUN COMMANDS, it works. I know the command line has to be right because of this.

Any ideas as to why the command is not auto running?

If it means anything, I am using firmware: DD-WRT v24-sp2 (10/10/09) mini

Thank you in advance!

[stav]

Run the command and reboot router.

[nulland]

Mjproxy runs only when there is internet connection. Perhaps "sleep 90" is too short a time for the router to connect to the internet? Try 120.

[JOFTAA]

Thank you both for your responses.

It seems the problem is a bit worse than I figured.

This morning, after making calls last night, I woke up to find no dial tone on my phone.

I checked the router using Putty to see if MJMD5 was running, and it was running. But, even so, no dialtone.

I rebooted ATA, no luck there, either.

A reboot of the network router proved pointless as well.

What I did notice is that the startup command is not running. Instead, when I reboot the router, instead of taking the usual 20-30 seconds to connect me to The Net, it is taking about the time I have set in the startup command. So, the router is not connecting to The Net until that time is expired.

Once connected, if I manually run the command, the MJ works again.

I am under the impression that the startup command should work in such a way as to not inhibit the router from connecting to The Net so that once connected the MJMD5 is run.


I am very green to all of this, but I am learning quickly. Just no quickly enough.

Additional info: I updated to the latest version of the same firmware. The proxy still works if I run it manually, but will not run automatically with the command being in the startup window.

[stav]

If you run sp2, check and see if your modem is supporting it. In particular, check jffs see if enabled. If still doesnt load automatically, I would reset to factory defaults and reconfigure.

I would also try v24, sp1 mini

[stav]

If you run sp2, check and see if your modem is supporting it. In particular, check jffs see if enabled. If still doesnt load automatically, I would reset to factory defaults and reconfigure.

I would also try v24, sp1 mini

"if your modem is supporting it" I mean router, sorry ..

[JOFTAA]

If you run sp2, check and see if your modem is supporting it. In particular, check jffs see if enabled. If still doesnt load automatically, I would reset to factory defaults and reconfigure.

I would also try v24, sp1 mini

The DD-WRT site specifically says NOT to use this version. Thanks, though.

I'm still plugging at this.

[neo2121]

Well the router is embedded Linux so SSH to it and see if you have this

Code: Select all

/etc/init.d/ 

directory. If so put the proxy script in there and use this command

Code: Select all

update-rc.d Name of script defaults

then change the permissions

Code: Select all

chmod +x name of script

see if that works if now just move everything back. I have no clue if that will work for the router but it will work for linux.[/code]

[bisbebri]

I think they changed something the windows mjmd5.exe stopped working as well.. When i look at it on wireshark is says something about the md5 not matching.

[arg3r0th79]

Greetings!
I've been at this for a number of hours now. I seem to be out of options.

When looking at my 'top' list heres what I got:

Mem: 13284K used, 15928K free, 0K shrd, 1748K buff, 5604K cached
CPU: 4.3% usr 4.5% sys 0.0% nic 91.0% idle 0.0% io 0.0% irq 0.0% sirq
Load average: 0.04 0.07 0.08 2/27 1841
PID PPID USER STAT VSZ %MEM %CPU COMMAND
288 1 root S 2932 10.0 5.3 httpd -p 80
1828 1823 root R 1516 5.1 0.7 top
14 1 root S 1836 6.2 0.0 watchdog
1 0 root S 1800 6.1 0.0 /sbin/init noinitrd
131 1 root S 1796 6.1 0.0 resetbutton
890 1 root S 1792 6.1 0.0 wland
561 1 root S 1792 6.1 0.0 process_monitor
248 1 root S 1792 6.1 0.0 ttraff
1823 189 root S 1528 5.2 0.0 -sh
466 1 root S 1520 5.2 0.0 /bin/sh /etc/config/proxywatchdog.sh
189 1 root S 1508 5.1 0.0 telnetd
1803 466 root S 1508 5.1 0.0 sleep 60
205 1 root S 1144 3.9 0.0 dnsmasq --conf-file=/tmp/dnsmasq.conf
915 1 root S 1072 3.6 0.0 /jffs/bin/mjproxy 0.0.0.0 5070 proxy01.newyork.talk4free.com 5070 xxxxxxxx
900 1 root S 1032 3.5 0.0 udhcpc -i vlan1 -p /var/run/udhcpc.pid -s /tmp/udhcpc
669 1 root S 1028 3.5 0.0 cron
10 1 root SW 0 0.0 0.0 [mtdblockd]
21 1 root SW 0 0.0 0.0 [khubd]
96 1 root SWN 0 0.0 0.0 [jffs2_gcd_mtd4]
3 1 root RWN 0 0.0 0.0 [ksoftirqd_CPU0]
4 1 root SW 0 0.0 0.0 [kswapd]
5 1 root SW 0 0.0 0.0 [bdflush]
2 1 root SW 0 0.0 0.0 [keventd]
43 1 root SW 0 0.0 0.0 [usb-storage-0]
44 1 root SW 0 0.0 0.0 [scsi_eh_0]

In the administration -> Commands menu I have the following:

Startup

sleep 90
/jffs/bin/mjproxy 0.0.0.0 5070 proxy01.newyork.talk4free.com 5070 xxxxxxxx

I can hear dial tone, but I cannot dial out... or receive calls. Anyone have any suggestions?

[greenman]

If this solution no longer works, perhaps it could be 'unstickied' and something can be added to the top of the original post suggesting this hack is no longer viable.

Cheers.