Dennis:
dtm wrote:lcompton wrote:This is very nice. Where is the 911 mapping in the dial plan? I'm not seeing it.
The outbound call routing is done in the phone port DigiMap under 'Physical Interfaces'. From what I read in the config manual, 911 is by default routed to the line port. The dial plan I posted allows 911 to be dialed. I am assuming that if I dial 911, it will route the call to the line port and use my DSL line to contact 911. I have NOT tested this feature and am going on assumptions that my dry DSL line will connect to 911. There is some debate on this but my line does have dial tone and will return a voice error if you try to dial a regular number on it.
Awesome!
Here's my dial plan:
Code: Select all
(*xx|<411:18002464411>S0|<911:16106925100>S0|[01235678]11!|<:1484>[2-9]xxxxxxS0|1xxx[2-9]xxxxxxS0|<:1>[2-9]xx[2-9]xxxxxxS0)
Since I can't call 911 on my dry DSL loop, I setup the 911 translator to call the 11-digit number for our county's emergency services center. I called emergency services to request permission to run a test and they granted it. The test ran fine. So, I effectively have 911 through Google Voice with the digit translation done in the dial plan (similar to your Bing 411 translation.)
Now, since this 911 approach isn't true 911, the call center will see my Google Voice number, but they don't have my name and address information so that would need to be provided in the event of an actual emergency.
I probably won't leave this dial plan active, but it's nice to know that the digit translation can do this stuff. If I do decide to leave this dial plan active, I'll add a five second delay (S5) on the 911 digit translation string so accidental 911 dials can be aborted.
I had to change the OutboundCallRoute and DigitMap values for the PHONE port under physical interfaces as well since they default to trying to send 911 out the POTS line interface.
Fun times!
Now, we just wait for Google to break this solution.
dtm wrote:On another note: Even if GV does somehow shut us down, the OBi is still an excellent ATA. I used the 'B' profile and SP2 to set up my Gizmo account while it is still working. The OBi does fine on it working as a conventional ATA. So, I won't be selling mine on eBay for $9.99

That may be, but I don't need anymore ATA's. I already have a Linksys PAP2T, which will soon be gathering dust when Gizmo5 passes into the night.
I'm going to need to find some time to put all of this VoIP stuff I've accumulated on eBay. I've got a pile of stuff collecting dust here.
dtm wrote:PS: nailgunner may be Dan himself ... one never knows.

In that case, hi, Dan! Hehe.