Magicjack plus connected to modem

[shells]

I have seen a few refferences to using the new magicjack plus connected to the modem and or router. I have run out of room on my router. How safe is it to connect it to the modem. Has anyone done this and what were the results

[SteveHC]

Don't you have only ONE Ethernet jack on your modem - which is already connected to your router?

[shells]

You're correct,there is only 1 port on the back. There is a usb also on the back of the modem and that is what I felt. Didn't look at the back. Could the Magicjack Plus be connected to that usb port ? without damaging anything and still run Magicjack Plus with the computer off ? Don't want to damage anything.......Thanks again for the prompt reply

[SteveHC]

Connecting your MJ+ to a USB port on your modem *shouldn't* damage it but neither will it enable the MJ+ to function.

To resolve your problem you will probably want to consider purchasing and installing a device that would effectively provide your router with additional Ethernet jacks (such as an Ethernet switch, an additional router or Wi-Fi access point that connects with your current router, or what have you). Eventually the new MJ+'s will have Wi-Fi connectability but who knows when that will happen.

[shells]

Thanks again. I will check into adding a additional router

[crackerjack]

Thanks again. I will check into adding a additional router

I would definitely dissuade you from adding an extra router to your layout. It will absolutely complicate your life and compromise your sanity.
Stick with a 'hub' or unmanaged switch. These inert devices do nothing more than provide for extra RJ45 ethernet ports where you can extend your network.

[SteveHC]

Thanks again. I will check into adding a additional router

I would definitely dissuade you from adding an extra router to your layout. It will absolutely complicate your life and compromise your sanity.
Stick with a 'hub' or unmanaged switch. These inert devices do nothing more than provide for extra RJ45 ethernet ports where you can extend your network.

I really wish manufacturers would start putting out residential wireless routers with more than 4 Ethernet ports on them.

[KMNugent52]

I really wish manufacturers would start putting out residential wireless routers with more than 4 Ethernet ports on them.

Buy and inexpensive Hub or Switch to easily add more ports to your existing router.

HTH -Kevin N.

[shells]

You are correct. I did some checking last night and that adding a hub is the best way to go and less expensive. Do you think it makes a difference what brand ? I was going to try a get a hub as the same name brand as my router. I have a Linksys/Cisco router.....Again thanks

[KMNugent52]

I have used a 3-com hub for years and more recently a Dynex (Best Buy Brand) They both work flawlessly.

[shells]

Thank you for your input. I will check it out

[greenman]

If you like tweaking your own router, this is one of the best:
ASUS RT-N16 Wireless Router 802.11b/g/n up to 300Mbps DD-WRT Open Source support with USB Storage, Printer And Media Server

I've got mine set up with open-source alternative firmware from tomato-usb, toastman build. the shibby build is fairly popular too.
http://toastmanfirmware.yolasite.com/

I also like this switch:
TP-LINK TL-SG1008D 10/100/1000Mbps Unmanaged 8-Port Gigabit Desktop Switch