magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

Release 1.01 of the Skype plugin for magicJack is now available for download at http://www.pcphonesoft.com .

It includes out of band DTMF support for touch tone menu use (i.e. FreeConferenceCalls.com, ATMs, Phone Cards, etc).

I have followed the steps mentioned in the first post, but am running into issues.

I am able to call into my skype number and will ring my phone, but after that call, skype dies, and something tries to open up a window to cuphone.com. I am guessing it is the IP Phone Center.

Is anyone else having this issue?

IP Phone Center 8.30.3
Skype: 4.1.0.179

Thanks,

revoohc

Release 1.05 of the Skype plugin for magicJack is now available for download at http://www.pcphonesoft.com .

Thanks, VoipDude, the IP Phone Center works well on my windows 7 x64 installation.

The SkyJack plugin works well too, but just wish you had to press * to use the magicjack side, rather than the skype side of the plugin

VoipDude wrote:You're welcome. I'm happy to know that this has worked for you.

The two ports used by MajicJack 5060 & 5070 UDP are blocked by internet provider. Do you think by using skype which uses different ports I can get back on ?

Yes - you have a much better chance using Skype. If you look at some of the advanced options in the Skype dialer you can manually change the ports used if necessary.

Now i am no computer guy. I fix computers and thats about it. I purchased a VOIP151 corded usb phone for skype. I also have the magic jack. Now i set my windows 7 laptop to ask me to run anything. With the newest version of skype installed I simply plugged in my magic jack and clicked deny to run the software. Then my skype popped up and said it found a new audio device and i clicked allow and now i can use my skype with magic jack. the issue is it only works if i start the call from the software then pick up the phone. I am going to downloAD THE software provided in this site. Thank you!

i have an older dongle, unregistered, not able to work with mj any longer.

i plug it into a usb port, plug the cordless headset (plantronics, which normally plugs into phone line) into dongle, set skype audio setting to use "usb internet phone by tigerjet" and i can make calls through skype, and have them come through the headset.

mj is also plugged in and operating, at the same time.

Please help!
I am sorry. I do not seem to understand exactly what I need to do in order to get the Philips VOIP151 working with Magic Jack.
Would it matter if I have the 4th generation MJ?
ThankX!

As you are aware, that is a VoIP USB phone and the software that comes with it are geared to only support keypad dialing with Skype.

You can use your VoIP USB Phone with magicJack but only as a simple audio device (i.e. like a headset) and all dialing and incoming call acceptance will have to manually be done via the magicJack dialer itself.

If you want to do the latter, right mouse click on the magicJack dialer icon and select Volume/Headset Control. Select Headset in the window that opens and then select your VoIP USB phone as the audio device (i.e. possibly called USB Audio Device).

The reverse approach would be to buy a regular or cordless phone to use with your magicJack USB dongle to place magicJack calls. If you want to also automatically be able to place and receive Skype calls from that same regular or cordless phone you can install the Skyjack Plugin from http://www.pcphonesoft.com .

Thank you so much for your detailed reply above.

I was hoping I could use the VOIP151 without the MJ dongle, and just by using x-lite + mjmd5.

Do you know of a generic USB handset (not exactly a voip phone) that can be used like a 'regular' telephone including dialing out with the MJ credentials along with the software mentioned?

I've a HP 5710 running MJ but need to add Skype so I downloaded Skype 4.2 and installed it on my computer. I'm using windows XPe. When I try to run to program from the desktop shortcut, I recieve an error: Cannot load the DLL (pdh.dll)! with a single option to press OK. I press Ok and nothing happens. No skype, no nothing

Any ideas how to correct o repair the problem

Thx Ann

Skyjack Plugin Release 2.0 is now available for download from the PCPhoneSoft website and it is compatible with magicJack's brand new dialer.

In case you are not familiar with this plugin, it upgrades a basic magicJack to allow dual mode MJ + Skype calling from the same phone.

An active MJ subscription is NOT required to use Skyjack Plugin Release 2.0 with a MJ USB dongle if you just want to place incoming and outgoing Skype calls.

You can download and try out the new Skyjack Plugin release for free for 7 days even if you previously tried it in the past.

I found the software here -

http://download.cnet.com/Skyjack-Plugin ... 18728.html

millermoto wrote:I found the software here - {pcphonesoft link via Cnet}

Sorry, but that is not the TigerJet software that n0ukf was requesting.

n0ukf wrote:The software I am speaking of is (IP Phone Center) by TigerJet. {http://www.tjnet.com/software/ip_phone/installation.htm}
This old link and every other one I find in search results is invalid. Where can I find this software now?

Unfortunately, TJNet pulled all of the links quite a while ago. The actual filename of the last IP Phone Center build was "IPC830_3_t.msi" and it supported Win98SE, WinME, and XP, also known to work on Vista.

You might try requesting the filename and see if anyone has it on a local drive so they can send it to you.

Or perhaps send VoipDude a PM and ask him.
--AD

I'm a little late to this game, but I have an expired MJ that I want to use to plug a regular phone in to use my paid Skype # with to make and receive calls. Looked at the Skyjack (http://www.pcphonesoft.com/index.html) but not sure if that's what I want or if there is another way.

I believe that this software is for use only with Google Voice.