magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

Anybody have problems with IPKALL or VOXOX under SS for outbound calls? I get one ring and busy tone. No problem with incoing calls. I am able to make outbound calls using VOXOX or IPKALL from GV screen. Any ideas please. Thanks in anticipation.

anant

anant,

I am also experiencing problems with Sip Sorcery dialing out with following service providers Gizmo5, Sipgate, IPKall, and VoxOx. All the service providers will ring once and then receive a busy signal. Apparently this is a Sip Sorcery or Google Voice issue.

anant wrote:Anybody have problems with IPKALL or VOXOX under SS for outbound calls? I get one ring and busy tone. No problem with incoing calls. I am able to make outbound calls using VOXOX or IPKALL from GV screen. Any ideas please. Thanks in anticipation.

anant

Same problem here with GV/IPKall & SS for outbound calls....one ring, then busy tone. If you find a solution, let me know.

It does not look that terrible as we can still make free calls at least using contact list on GV screen and our cordless phone rings and call goes thru. Hope this continues. May not be that convenient but still we have something till a good solution is found by wise people.

anant

For those who want an alternative to GV Web callback whilst we await a fix in sipsorcery, you can download GV Dialer here (it'll still ring/callback your phone):

http://www.dslreports.com/forum/r23096701-

Apparently someone needs to apply a new patch to sipsorcery since the GV authentication scheme has recently changed (CAPTCHA vs. GALX):

http://code.google.com/apis/accounts/do ... dApps.html

Synchron

OK Somebody did something. Thanks. SS+IPKALL working for both in/out calls.

anant

Sipgate too. Thanks for the heads up!

Edit:10/18/09

Apparently, my guess was wrong and the root cause of the problem was on GV's end, not SS.

Synchron

I'm not exactly sure the details of a PAP2 since I don't own one. I'd try first seeing if MJMD5 has something to do with it by swapping the lines and having the SS stuff running on your line 1. By definition, the sipsorcery method does not require a PC and your ATA is registered by their authentication server that is setup properly through the Silverlight driven website.

On very rare occasions my SS registration would die and I would have to reset the router to resynch the ATA to their server but not all the time I turn my PC off the way you describe.

Synchron

Hi Folks:

Since yesterday, I have noticed a problem with SS+IPKALL+PAP2T for outbound calls. When I dial a number, it makes several rings but does not go to the next level of calling the actual #. This problem is intermittent - comes and goes - but bothering. Has anyone noticed this problem ?
Calling out from GV screen has no such problem.
Thanks in antipation of your reply.

anant

anant wrote:Hi Folks:

Since yesterday, I have noticed a problem with SS+IPKALL+PAP2T for outbound calls. When I dial a number, it makes several rings but does not go to the next level of calling the actual #. This problem is intermittent - comes and goes - but bothering. Has anyone noticed this problem ?
Calling out from GV screen has no such problem.
Thanks in antipation of your reply.

anant

I am having the same exact problem. When the call does finally go through, it is so garbled that I am unable to understand the person on the other end.

Calling out from the GV screen goes through correctly, but has the same garbled speech. It appears the problem is with GV, because regardless of which of my numbers I have GV ring through the GV screen, they are all garbled.

Update: The garbled speech is now clear, but the calls going through on first try is still sporadic.

Anyone can help me i can not receive any call on my pap2t but i can make it!! ! i am using SS GV G5 maybe i have a bad dial plan on ss for incoming calls can you help me please???

Hi:
As far as I know there is no need for any dial plan in SS for INBOUND calls.

anant

The pap2t sounds with another configuration then i do not think the problem is there....

but when someone dials to my GV number my pap2t do not rings =( with the GV SS G5 i can make calls but i can not receive any =(

R U sure you have your GV account set to ring your G5 1747 phone #?

Do you have your G5 account set to forward to your [email protected] or r your sip credentials correct and your register is checked in SS under provider names?

Synchron

Yeah, it's nice to implement my backup system simply by switching ATA to MJMD5 and checking MJ number in GV while sipsorcery is down. PC has to be on but at least the calls are pretty clear this way.

Synchron

VoipDude wrote:Aaron @ SipSorcery has been transitioning the database, and as a result it appears the server is currently down.

I've been trying to search the mysipswitch forums but haven't come up with an ETA on when all will be up and running again. Do you have any inside info and when we can use it again?
Thanks

I am also wondering when the SS will be up again. This has been a long wait like about one and half days.

anant

I am thankful for Sipsocery. I like my setup because it is still works for in coming when Sipsocery is down.

I have a Linksys SPA 1001. It can use two voip lines to one phone. With Sipgate you can tie two sip links to one DID number. One of my Sipgate sip links goes though Sipsocery then to line one of the Linksys SPA 1001, while the second Sipgate sip link goes to line two of the sip Linksys SPA 1001.

That way you always have a in coming line when Sipsocery is down.

synchron wrote:Yeah, it's nice to implement my backup system simply by switching ATA to MJMD5 and checking MJ number in GV while sipsorcery is down. PC has to be on but at least the calls are pretty clear this way.

Synchron

Yeah, but I don't recall all steps and things to change to get the goglevoice out working again.

wait...I am running mjmd5 on line 2. But the problem is that when people call in, it kicks to voice mail after one ring or less (the line keeps ringing with correct caller id until we hit end on phone, while send only gives us silence). So, no true incoming call ability. I have tried everything conceivable with no luck. I have set to most rings possible. (I don't see ever a need for voice mail to pickup before the 11 th ring, with empty mailbox.)

The majic jackedup dongle is so buggy, I have no plans to replug that thing into the computer.

I still have problem with SS + PAP2T with all SIP providers IPKALL/sipgate/gizmo/voxox. It is not consistent and not reliable. It does not work from GV screen either. When I call from a cordless phone connected to PAP2T, it goes on ringing but does not go to the next level rings to make the call. I suspect the problem is still with SS and not with SIP providers.

anant

New documentation on Google Voice and Sipsorcery.

Enjoy: http://docs.google.com/Doc?docid=0Ae8gl ... NjeA&hl=en

Synchron