problem thin client

Discuss magicJack running on Thin Clients

Moderators: Bill Smith, Pilot

Post Reply
was331
MagicJack Newbie
Posts: 5
Joined: Wed Oct 05, 2011 9:18 pm

problem thin client

Post by was331 »

I was hooking up key board,mouse and monitor to thin client but key bord light is not on and mouse will not work M J is working ok is thin client going bad?
Top
KMNugent52
Dan isn't smart enough to hire me
Posts: 100
Joined: Fri Nov 14, 2008 10:19 am
Location: N.E. Georgia

Post by KMNugent52 »

Look in the BIOS to see if the keyboard and mouse ports are activated.
Top
VaHam
Dan Should Pay Me
Posts: 851
Joined: Wed Feb 13, 2008 8:02 pm

Post by VaHam »

To get into the bios you may have to use a usb keyboard if it is the ps2 keyboard which is not working. After you there you can enable both so you won't have this trouble again.
Sad Times Ahead for this Obamanation !!!! Psalms 109:8
Top
dogcacher
MagicJack User
Posts: 49
Joined: Mon Oct 04, 2010 11:29 am
Location: W. Central PA

Re: problem thin client

Post by dogcacher »

was331 wrote:I was hooking up key board,mouse and monitor to thin client but key bord light is not on and mouse will not work M J is working ok is thin client going bad?
If you are using the PS2 ports, you can't do it hot, they won't be recognized. USB is OK but not PS2. Shut it down and plug them in and restart.
Top
Post Reply

Return to “Using magicJack on a Thin Client”