I can hear who I call...

Having issues with your magicJack? Post here, and we'll try to help you out!

Moderators: Bill Smith, Pilot

Post Reply
dean881
MagicJack Newbie
Posts: 5
Joined: Sat Apr 26, 2008 10:40 pm

I can hear who I call...

Post by dean881 »

I can hear who I call, but they can't hear me. What's the problem.
HendersonMike
Dan isn't smart enough to hire me
Posts: 274
Joined: Wed Apr 09, 2008 9:36 pm
Location: Henderson, Nevada state, usA

Post by HendersonMike »

Image
Maintenance of YOUR machine IS everything
MY Newer Newest Setup
Alternative MJ Forum
HolmanGT
MagicJack Sensei
Posts: 1127
Joined: Tue Jan 08, 2008 7:13 am
Location: Saint George, UT

Re: I can hear who I call...

Post by HolmanGT »

dean881 wrote:I can hear who I call, but they can't hear me. What's the problem.
dean881,

Look in this post and take a look at the dcument I posted. I am apparently in a betting mood tonight so my money says if you set everthing up like I suggest in the document it will work fine and they will hear you and vise versa.

http://www.phoneservicesupport.com/hard ... t1198.html
- George -

HolmanGT - St. George, UT MJ-Area/Prefix 435-275
ooma-Area/Prefix 435-579
Baja Broadband, up-1mb dn-10mb, on days with a good tail wind.
MJ on HP T5730 2GBF/2GBR Thin Client XPe SP2 Router Dlink Dir-655
dean881
MagicJack Newbie
Posts: 5
Joined: Sat Apr 26, 2008 10:40 pm

HendersonMike...

Post by dean881 »

Your advice doesn't help because I don't know what to search for. I'm sorry I'm not as smart as you, but, real help would be appreciated. Just wondered if others has similar problems as me & could give me some useful advice. Sorry if I wasted your time.
dean881
MagicJack Newbie
Posts: 5
Joined: Sat Apr 26, 2008 10:40 pm

Holmat...

Post by dean881 »

Thanks for the help. Did exactly what your directions said, but, the person on the other end still could not hear me. Was using it with satellite internet & maybe that is the issue.
HolmanGT
MagicJack Sensei
Posts: 1127
Joined: Tue Jan 08, 2008 7:13 am
Location: Saint George, UT

Post by HolmanGT »

dean881,

Satellite, Hmmm - that in itself could be a difficult problem. The only thing I know about them is they have a terrible latency time. What kind of up load/down load speeds to you get. Nah for what I have said. I don't think those thing would effect volume only quality.

Have you gone on the MJ site and run the MagicFIX and install the Vista update (the Vista update is used regardless of you M$ OS. It is used for XP and Vista). Anyway I am starting to get suspicious of maybe a defective lot coming out of MJ. I have never heard this too quiet problem until the last week or two.

If MagicFix doesn't help you I would contact Tech Support (I know you would rather walk on glass bare footed) it may be your only alternative. See if you can talk them into a replacement unit if some of these last minute suggestions don't help.

Let me know how it goes - I sure would like to know what is causing this sudden rash of low volume issues.
- George -

HolmanGT - St. George, UT MJ-Area/Prefix 435-275
ooma-Area/Prefix 435-579
Baja Broadband, up-1mb dn-10mb, on days with a good tail wind.
MJ on HP T5730 2GBF/2GBR Thin Client XPe SP2 Router Dlink Dir-655
Stewart
Dan Should Pay Me
Posts: 663
Joined: Tue Nov 13, 2007 2:58 pm

Re: Holmat...

Post by Stewart »

dean881 wrote:Thanks for the help. Did exactly what your directions said, but, the person on the other end still could not hear me. Was using it with satellite internet & maybe that is the issue.
But it appears that your last two posts were made via a Comcast cable connection. Is that correct? If so, did that fix the problem with MJ?
LikeMagic
Dan Should Pay Me
Posts: 613
Joined: Tue Jan 01, 2008 9:11 pm
Location: LikeMagic Pacific NW

Re: Holmat...

Post by LikeMagic »

Stewart wrote:
dean881 wrote:Thanks for the help. Did exactly what your directions said, but, the person on the other end still could not hear me. Was using it with satellite internet & maybe that is the issue.
But it appears that your last two posts were made via a Comcast cable connection. Is that correct? If so, did that fix the problem with MJ?
Hey, it's not fair :wink: Admin "sees" more stuff regular users couldn't see. How do I apply for "Admin" class of user? :roll: 8)
HolmanGT
MagicJack Sensei
Posts: 1127
Joined: Tue Jan 08, 2008 7:13 am
Location: Saint George, UT

Re: Holmat...

Post by HolmanGT »

LikeMagic wrote:
Stewart wrote:
dean881 wrote:Thanks for the help. Did exactly what your directions said, but, the person on the other end still could not hear me. Was using it with satellite internet & maybe that is the issue.
But it appears that your last two posts were made via a Comcast cable connection. Is that correct? If so, did that fix the problem with MJ?
Hey, it's not fair :wink: Admin "sees" more stuff regular users couldn't see. How do I apply for "Admin" class of user? :roll: 8)
No fair! how do I apply for LikeMagic class user, because you obviously see more than I do. How did/do you know that "dean881" is an administrator?
- George -

HolmanGT - St. George, UT MJ-Area/Prefix 435-275
ooma-Area/Prefix 435-579
Baja Broadband, up-1mb dn-10mb, on days with a good tail wind.
MJ on HP T5730 2GBF/2GBR Thin Client XPe SP2 Router Dlink Dir-655
LikeMagic
Dan Should Pay Me
Posts: 613
Joined: Tue Jan 01, 2008 9:11 pm
Location: LikeMagic Pacific NW

Re: Holmat...

Post by LikeMagic »

HolmanGT wrote:
LikeMagic wrote:
Stewart wrote:But it appears that your last two posts were made via a Comcast cable connection. Is that correct? If so, did that fix the problem with MJ?
Hey, it's not fair :wink: Admin "sees" more stuff regular users couldn't see. How do I apply for "Admin" class of user? :roll: 8)
No fair! how do I apply for LikeMagic class user, because you obviously see more than I do. How did/do you know that "dean881" is an administrator?
I didn't say dean881 was an admin. I meant Stewart, he's an admin :wink: Are you having another "senior moment"? :wink: :lol:
HolmanGT
MagicJack Sensei
Posts: 1127
Joined: Tue Jan 08, 2008 7:13 am
Location: Saint George, UT

Post by HolmanGT »

"Senior Moment" they do tend to come in bunches but in this case I think you are trying to "Gas-Light" me.

OK then how do you know that Stewart is an Administrator?
- George -

HolmanGT - St. George, UT MJ-Area/Prefix 435-275
ooma-Area/Prefix 435-579
Baja Broadband, up-1mb dn-10mb, on days with a good tail wind.
MJ on HP T5730 2GBF/2GBR Thin Client XPe SP2 Router Dlink Dir-655
LikeMagic
Dan Should Pay Me
Posts: 613
Joined: Tue Jan 01, 2008 9:11 pm
Location: LikeMagic Pacific NW

Post by LikeMagic »

HolmanGT wrote:"Senior Moment" they do tend to come in bunches but in this case I think you are trying to "Gas-Light" me.

OK then how do you know that Stewart is an Administrator?
I think you'd better get your bi-focal or progressive lens checked again :wink:

On the forum's main page (near bottom,) you'll see all logged-in users with their color-coded user status:
Regular User
Administrator
Moderator
HolmanGT
MagicJack Sensei
Posts: 1127
Joined: Tue Jan 08, 2008 7:13 am
Location: Saint George, UT

Post by HolmanGT »

LikeMagic wrote:
HolmanGT wrote:"Senior Moment" they do tend to come in bunches but in this case I think you are trying to "Gas-Light" me.

OK then how do you know that Stewart is an Administrator?
I think you'd better get your bi-focal or progressive lens checked again :wink:

On the forum's main page (near bottom,) you'll see all logged-in users with their color-coded user status:
Regular User
Administrator
Moderator
I am a American I don't have to be observant if I don't want to.

Image
- George -

HolmanGT - St. George, UT MJ-Area/Prefix 435-275
ooma-Area/Prefix 435-579
Baja Broadband, up-1mb dn-10mb, on days with a good tail wind.
MJ on HP T5730 2GBF/2GBR Thin Client XPe SP2 Router Dlink Dir-655
LikeMagic
Dan Should Pay Me
Posts: 613
Joined: Tue Jan 01, 2008 9:11 pm
Location: LikeMagic Pacific NW

Post by LikeMagic »

I can't hear you! :roll: you must speak louder :wink:
Post Reply