QOS Help Please.

Having issues with your magicJack? Post here, and we'll try to help you out!

Moderators: Pilot, Bill Smith

Post Reply
smokozuna
magicJack Apprentice
Posts: 24
Joined: Wed Apr 16, 2008 2:47 pm

QOS Help Please.

Post by smokozuna »

Hello,

I could use some help setting my QOS settings in my router for Magicjack please. I am using a Linksys WRT54GL with Tomato firmware.

Thanks
norml jack
Dan isn't smart enough to hire me
Posts: 115
Joined: Mon Jan 07, 2008 7:08 pm
Location: Humboldt County, Ca.
Contact:

Re: QOS Help Please.

Post by norml jack »

smokozuna wrote:Hello,

I could use some help setting my QOS settings in my router for Magicjack please. I am using a Linksys WRT54GL with Tomato firmware.

Thanks
Tomato firmware does not work with MagicJack. Try Bell pepper firmware instead. Make sure it is the green variety, not the red or yellow.
VaHam
Dan Should Pay Me
Posts: 851
Joined: Wed Feb 13, 2008 8:02 pm

Re: QOS Help Please.

Post by VaHam »

smokozuna wrote:Hello,

I could use some help setting my QOS settings in my router for Magicjack please. I am using a Linksys WRT54GL with Tomato firmware.

Thanks
Sorry I use DD-WRT here but basically you need to open UDP ports 5060 and 5070. Ports 10,000-20,000 for the RTP traffic. Give them priority!
tamichrist
MagicJack Newbie
Posts: 2
Joined: Thu May 08, 2008 10:33 am

Post by tamichrist »

10,000 to 20,000 that also UDP ?
LikeMagic
Dan Should Pay Me
Posts: 613
Joined: Tue Jan 01, 2008 9:11 pm
Location: LikeMagic Pacific NW

Post by LikeMagic »

VOIP/SIP uses only UDP.
Post Reply