Sipura SPA-1001 and SPA-2100

magicJack Tips and Tricks

Moderators: Pilot, Bill Smith

Post Reply
DKWebber
MagicJack Newbie
Posts: 3
Joined: Fri Jan 04, 2008 6:11 pm

Sipura SPA-1001 and SPA-2100

Post by DKWebber »

Can the Sipura SPA-1001 and 2100 if unlocked.
Be used on the MagicJack system.
Before regestering a MagicJack and after ???

Thanks Doug
dssman
magicJack Apprentice
Posts: 13
Joined: Sat Nov 17, 2007 3:53 pm

Post by dssman »

Not yet. But I've read that the feature may become available in the future.
kumar
Dan Should Pay Me
Posts: 806
Joined: Thu Nov 15, 2007 4:29 pm
Contact:

Re: Sipura SPA-1001 and SPA-2100

Post by kumar »

DKWebber wrote:Can the Sipura SPA-1001 and 2100 if unlocked.
Be used on the MagicJack system.
Before regestering a MagicJack and after ???

Thanks Doug
What services are they branded for?
DKWebber
MagicJack Newbie
Posts: 3
Joined: Fri Jan 04, 2008 6:11 pm

Sipura SPA-1001 and SPA-2100

Post by DKWebber »

Are used on many VoIP systems.
And my 1001 and 2100 are both open and unlocked.

Doug
Douglas Webber
uzoc2005
magicJack Apprentice
Posts: 10
Joined: Fri Nov 27, 2009 12:15 am

Post by uzoc2005 »

Anyone have setup MagcJack in a Sipura 1001?
I already have the ID /password using PassWordFinder 2.2. and guess the proxy to be: proxy1.newyork.talk4free.com (since I live in New York) I changed to the IP of the same. Then set it up as line 2 and (I have GalaxyVoice on line 1). It doesn’t work.

Anyone have it working on the Sipura 1001? What are the basic/advanced settings?
User avatar
bfksc
MagicJack Contributor
Posts: 62
Joined: Wed Oct 07, 2009 2:39 pm
Location: Canada

Post by bfksc »

uzoc2005 wrote:Anyone have setup MagcJack in a Sipura 1001?
Anyone have it working on the Sipura 1001? What are the basic/advanced settings?
I have a 3102 and MJ works fine. You need to make sure you enter your ID and password exactly (use copy/paste) as well as the authorized user which is the same as ID.

Your SIP proxy server will be proxy01.cityname.talk4free.com:5070 - note the zero one in the proxy and SIP port number at the end.

Also, under the SIP settings you need the SIP user agent name field and change it to match your MJ user-agent which should be MagicJack/1.80.499.2 (SJ Labs) if it's the latest version.
uzoc2005
magicJack Apprentice
Posts: 10
Joined: Fri Nov 27, 2009 12:15 am

Post by uzoc2005 »

Thanks I changed the proxy but were is the user agent field for: MagicJack/1.80.499.2 (SJ Labs)

Under the system, SIP, line 2 menu, or?
uzoc2005
magicJack Apprentice
Posts: 10
Joined: Fri Nov 27, 2009 12:15 am

Post by uzoc2005 »

Sorry, I'm not reading. It's under the SIP settings, thanks. Ok still not cigar.
What do you have under SIP server name?
uzoc2005
magicJack Apprentice
Posts: 10
Joined: Fri Nov 27, 2009 12:15 am

Post by uzoc2005 »

To clarify: I'm using GalaxyVoice under "Line1" and setting up MJ for "Line2".
I'll make "Line 2" my default once everything is OK.
Also, under the "SIP" menu is "STUN Server" with "stun.gis.net" what do you see there?
User avatar
bfksc
MagicJack Contributor
Posts: 62
Joined: Wed Oct 07, 2009 2:39 pm
Location: Canada

Post by bfksc »

uzoc2005 wrote:Sorry, I'm not reading. It's under the SIP settings, thanks. Ok still not cigar.
What do you have under SIP server name?
It's the default setting of $VERSION which I realize there may be several settings that are different since the 1001 is quite old by todays VOIP standards. I updated the firmware on my 3102 which was 2 revisions behind and I noticed a few changes to default values.

There's a thread here somewhere about using a PAP2/2102 that might help with other settings. Basically I just changed a few things to get it to register, in this order:

Line 1 - proxy - ID - password

Didn't work until I made this change which I found reading threads here.

SIP - user agent

Some people said they had to change the Register Expires time to 1800 seconds, but it works at 3600 for me although the SIP proxy server forces 1800 anyway.

Now perhaps I should mention I'm using my 3102 ahead of my network router because my router is a bit older and does not properly support QOS for VOIP packets. With the 3102 first behind the modem I usually get decent voice quality (although never as good as my 3G cell or my friend's VOIP through a national provider. Yes this means my setup is a double NAT, but the two routers are using completely different IP ranges so it works just fine.
uzoc2005
magicJack Apprentice
Posts: 10
Joined: Fri Nov 27, 2009 12:15 am

Post by uzoc2005 »

Ok, disabling/enabling "STUN server" does not make a difference for GV or MJ. So it's something else. Can you give me a paste of your "SIP" menu settings?
User avatar
bfksc
MagicJack Contributor
Posts: 62
Joined: Wed Oct 07, 2009 2:39 pm
Location: Canada

Post by bfksc »

uzoc2005 wrote:Ok, disabling/enabling "STUN server" does not make a difference for GV or MJ. So it's something else. Can you give me a paste of your "SIP" menu settings?
Right STUN is disabled for me as mine is a virgin Linksys 3102 with updated firmware from Cisco/Linksys.

Ok...I setup a temp site, go here:

http://sites.google.com/site/compatico/
uzoc2005
magicJack Apprentice
Posts: 10
Joined: Fri Nov 27, 2009 12:15 am

Post by uzoc2005 »

Thanks! I'll check it out soon and let you/all know how it went.
uzoc2005
magicJack Apprentice
Posts: 10
Joined: Fri Nov 27, 2009 12:15 am

Post by uzoc2005 »

Ok, no cigarro with your SIP settings.

For anyone who's reading this, please note that I am using a SIPURA 1001 version: 3.1.8(SEc) with GalaxyVoice. I can still use GV with the settings changed. Somethings are changed around some codecs are missing for me. The SIP TCP PORT MIN and MAX is missing on mines, RTP Packet SIZE is 0.03 on mines, stun enable is on for me with the GIS server (turning it off does not make an apparent difference) and NAT keep alive was 60 for me, now 15.

Too much trouble to have you paste the rest like Line 1/2?
An easier way might be using the "snipping tool" on some versions of Windows.
User avatar
bfksc
MagicJack Contributor
Posts: 62
Joined: Wed Oct 07, 2009 2:39 pm
Location: Canada

Post by bfksc »

uzoc2005 wrote:Ok, no cigarro with your SIP settings.

For anyone who's reading this, please note that I am using a SIPURA 1001 version: 3.1.8(SEc) with GalaxyVoice. I can still use GV with the settings changed. Somethings are changed around some codecs are missing for me.
Codecs will be 729a and 711u only. MJ works with either for most of my calls, but a few use 729a only.
The SIP TCP PORT MIN and MAX is missing on mines,
It shouldn't matter, MJ only uses 5070.
RTP Packet SIZE is 0.03 on mines,
That will work fine. 0.020 or 20 ms will also work but it increases the overhead.
stun enable is on for me with the GIS server (turning it off does not make an apparent difference)
If you can turn it off, do so as MJ doesn't use a STUN server.
and NAT keep alive was 60 for me, now 15.

I don't know if that matters or not.
Too much trouble to have you paste the rest like Line 1/2?
An easier way might be using the "snipping tool" on some versions of Windows.
I'll post all of the pages tomorrow for you and you can see all of the settings - except passwords, ips, etc.
:D
uzoc2005
magicJack Apprentice
Posts: 10
Joined: Fri Nov 27, 2009 12:15 am

Post by uzoc2005 »

bfksc wrote:
uzoc2005 wrote:Ok, disabling/enabling "STUN server" does not make a difference for GV or MJ. So it's something else. Can you give me a paste of your "SIP" menu settings?
Right STUN is disabled for me as mine is a virgin Linksys 3102 with updated firmware from Cisco/Linksys.

Ok...I setup a temp site, go here:

http://sites.google.com/site/compatico/
Thanks for all your help.
The link was fine before, now it says I do not have "sufficient privileges".
Can you double check?
User avatar
bfksc
MagicJack Contributor
Posts: 62
Joined: Wed Oct 07, 2009 2:39 pm
Location: Canada

Post by bfksc »

uzoc2005 wrote:Thanks for all your help.
The link was fine before, now it says I do not have "sufficient privileges".
Can you double check?
I checked it and there is something amiss with Google right now...I can't update or edit the site. I'll try later today.
User avatar
bfksc
MagicJack Contributor
Posts: 62
Joined: Wed Oct 07, 2009 2:39 pm
Location: Canada

Post by bfksc »

uzoc2005 wrote:The link was fine before, now it says I do not have "sufficient privileges".
Can you double check?
Sorry it took so long, I had a busy week and didn't get to it. But for some odd reason I can't get the home page to accept images so I created a sub-page you can try:

http://sites.google.com/site/compatico/home/ata

Just to make sure you have the right settings, the display name can be anything (your MJ number is fine), the User ID must be Exxxxxxxxxx01 where the "x" is your 10 digit MJ number without hyphens with "E" and "01" (zero one) pre and post-pended, and the password is a 20 character alpha-numeric string. Once you have those and the user-agent set, it should register ok.

However, I have read that some people are not able to get their MJ settings to work with an ATA. Mine works fine, but maybe I'm just lucky.
:)
Post Reply