echo problem please help

emiliomcol · Post by **emiliomcol** » Sat Dec 13, 2008 5:50 pm

hello, the problem is when i make a call to any cell phone its ok but when i place a call to a landline number i have a big echo of myself.. can anyone help how to get tha echo go away i hear about some numbers or something can be dial well any help will be great thank a lot

PTravel · Post by **PTravel** » Sun Dec 14, 2008 1:29 pm

Try to find a copy of the TJ echo-canceling software. It used to be readily available, but was pulled when the publisher started incorporating the technology into chipsets.

The name of the file you want to find is:

TJNetLec_v1.msi

It took me a bit, but I was able to find it some 6 months ago. I'm sure it's still out there.

(And, before you ask, sorry, I can't send it to you -- it's a violation of copyright law and I'm an intellectual property lawyer. I'm held to a high standard as a matter of law and just can't do it.)

az2008 · Post by **az2008** » Sun Dec 14, 2008 1:34 pm

PTravel wrote:It took me a bit, but I was able to find it some 6 months ago. I'm sure it's still out there.

http://www.dslreports.com/forum/r214335 ... er-Utility

Mark

emiliomcol · Post by **emiliomcol** » Sun Dec 14, 2008 3:27 pm

i downloaded the TigerJet and installed but when i tried to enable the software told me that unplug and plug my tigerjet USB?? sorry but i dont know what to do im new on this about MJ jeje how i do for enable

Thank

PTravel · Post by **PTravel** » Mon Dec 15, 2008 12:46 pm

Once the TJ software has been installed, reboot your computer and then plug-in your MJ. After the MJ starts, right-click on the TJ icon in the system tray and select, "enable." That's all you need to do. From then on, whenever you start the MJ, the TJ will detect it and start running. You'll be able to tell because the TJ icon in the system tray will turn green.

hsweiss · Post by **hsweiss** » Mon Dec 15, 2008 1:04 pm

See this thread on the echo problem:

http://www.phoneservicesupport.com/echo-t974.html

emiliomcol · Post by **emiliomcol** » Mon Dec 15, 2008 8:32 pm

i tried installing and reboot the pc well when system star ( Vista Home Premium ) it says failed to create file.It is in use ? thats what TJ soft told me and then MJ start and when i tried to enable the feature told me againg that unplug and plug in back the USB Audio Device..... What is the problem there please help thank

hsweiss · Post by **hsweiss** » Wed Dec 17, 2008 12:28 pm

Does that old TigerJet echo cancellation work on Vista? BTW, I have it running on XP but its never helped. I had echo whether it was enabled or not enabled.

emiliomcol · Post by **emiliomcol** » Wed Dec 17, 2008 2:47 pm

finally i cant make it work but y resolve with the *67 trick it work fine for me the echo gone complete.. BTW i was only having echo on landline phones on the cell phone the calls are always 100 % fine...

az2008 · Post by **az2008** » Wed Dec 17, 2008 4:51 pm

emiliomcol wrote:finally i cant make it work but y resolve with the *67 trick it work fine for me the echo gone complete.. BTW i was only having echo on landline phones on the cell phone the calls are always 100 % fine...

I found I get more echo when my mic volume is turned up too high. I use a headset, not speakers. (So, it's not feedback between the mic and speakers.). It seems like the volume of audio I send out can trigger it.

I go into the softphone's menu, and lower the handset/volume control to 50% (for the microphone). I don't know if that volume control applies to handsets. I haven't used one.

Mark

PTravel · Post by **PTravel** » Wed Dec 17, 2008 4:57 pm

hsweiss wrote:Does that old TigerJet echo cancellation work on Vista? BTW, I have it running on XP but its never helped. I had echo whether it was enabled or not enabled.

It works fine on my Vista Business-equipped laptop. I've also found it to be pretty effective, particularly when traveling internationally.

emiliomcol · Post by **emiliomcol** » Wed Dec 17, 2008 7:33 pm

finally for me dosnt work, i tried the *67 trick and that work fine, the echo go away complete and the sound quality was better jeje thank for the help...

hsweiss · Post by **hsweiss** » Thu Dec 18, 2008 9:24 am

Amazing - they fix one area and introduce the problem in another. I had BAD echo between calls in the 718 area code. *67 was the ONLY thing that solved the problem. As of a few weeks ago I could dial the number w/o *67 and there is no echo (although a few callers have complained that they hear echo on their end). So, for right now I have no echo and am not using the TJ software (which like I said previously did nothing for me) or *67 (which did fix the problem but introduced a slight delay).