magicjack on PAP2T

ashvee · Post by **ashvee** » Thu Feb 19, 2009 3:37 pm

I am using link PAP2T as the adapter .for magicjack SIP.

When dialing another number it takes 10 seconds to hear the ring

what setting should be changed

ashvee · Post by **ashvee** » Thu Feb 19, 2009 6:21 pm

not getting incoming calls most of the time

any setting to be changed in Linksys pap2t or magicjack is blocking

mberlant · Post by **mberlant** » Fri Feb 20, 2009 1:31 am

It seems you need to change two things.

To correct your not being able to use the service for the latter 45 minutes of each operational hour, in the appropriate Line page change "Register Expires" from 3600 to 840. (This is documented in quite a few previous threads.)

To reduce your wait time when you finish dialing a call, you need to teach your Dial Plan how to do that. Look at the bottom of this thread for a suitable Dial Plan that will also block international calls for you.

ashvee · Post by **ashvee** » Fri Feb 20, 2009 11:30 am

thnx mberlnt

I have entered the dialing plan like this

(*xx|911|<411:18004664411>|[235678]11!|<:1555>[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|<:1>[2-9]xx[2-9]xxxxxxS0)

But still i am not getting calls all the time . some times it goes to voicemail

mberlant · Post by **mberlant** » Fri Feb 20, 2009 7:55 pm

Read my reply again. What have you done about the "Register Expires" timer?

Also, your Dial Plan does nothing to speed your calls along. Since you have ambiguous entries (permitting 10 digit dialing plus 11 digit dialing plus 411 is a no-no), you have given yourself no alternative than for the ATA to wait 5 extra seconds to be sure that no more digits are coming.

haack · Post by **haack** » Sun Feb 22, 2009 12:28 am

also when i dial a number from my pap2t magicjack the destination phone do not show any caller id info how i can fix it , please someone that have a good working setting for pap2t please post the info!!

mberlant · Post by **mberlant** » Sun Feb 22, 2009 12:37 am

haack, you need to read the previous postings that deal with exactly how Caller ID works (and when it does not work), in order to either find your answer or ask the right question.

It is difficult to understand from your comment whether you are having trouble with the PAP or whether you are thinking that using a PAP instead of the dongle will magically create a feature that MJ does not have.

Exactly what shows up in the other person's Caller ID display when you place a call?

haack · Post by **haack** » Sun Feb 22, 2009 5:03 pm

have no caller id info when i dial from pap2t using magicjack info, so i need a good papt2 configuration to see what is wrong with me =(
Thanks

mcbelisle · Post by **mcbelisle** » Sun Feb 22, 2009 5:36 pm

there isn't any. caller id does not work with magicjack either with or without the software. please read the other posts regarding this

haack · Post by **haack** » Sun Feb 22, 2009 6:32 pm

then wich is a good pap2t configuration ? or where i can get the good one =)
thanks

mberlant · Post by **mberlant** » Sun Feb 22, 2009 6:59 pm

I will ask again. Exactly what shows up in the other person's Caller ID display when you place a call? "Nothing" is not a possible answer, unless the person you are calling does not subscribe to incoming Caller ID.

zixy_tris · Post by **zixy_tris** » Sun Feb 22, 2009 11:46 pm

i have pap2t and caller id works. Just make sure you put your name m(caller id) where you enter login info

haack · Post by **haack** » Mon Feb 23, 2009 5:53 pm

i will try to put my name on the pap2t

magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

magicjack on PAP2T

magicjack on PAP2T

i have the same problem =(

the other person

ok thanks

ok