Hello Guys i m getting some difficulty to configure magic jack with linksys SPA 2102... please help me out to find SIP settings and how to connect magic jack with SPA 2102 ??? :( and getting errors from magicjack_utilities it says" invalid MJflashDriveLetter in Config.in or not plugged in. Correct and try again"
Thanks [/img]
difficulty to configure magic jack with linksys SPA 2102
Moderators: Bill Smith, Pilot
Please read any (preferably, all) of the threads that talk about any Linksys PAP or SPA product. The configuration of all of these devices is 99% the same.
For problems with the error message, please follow the advice in the threads that talk about using MJ without the dongle and on a separate ATA. You must not, for example, connect your MJ dongle while your ATA is connected. Only troubleshoot your MJ dongle or software connection without your ATA connected.
For problems with the error message, please follow the advice in the threads that talk about using MJ without the dongle and on a separate ATA. You must not, for example, connect your MJ dongle while your ATA is connected. Only troubleshoot your MJ dongle or software connection without your ATA connected.
-
arcadia2uk
- Dan isn't smart enough to hire me
- Posts: 187
- Joined: Sun Dec 07, 2008 9:03 pm
check this for 2102 configuration;
http://www.phoneservicesupport.com/post26336.html#26336
check this for how to set the drive letter correctly;
http://www.phoneservicesupport.com/post28616.html#28616
http://www.phoneservicesupport.com/post26336.html#26336
check this for how to set the drive letter correctly;
http://www.phoneservicesupport.com/post28616.html#28616