Is there a how-to for MJ + SPA3102?

M_C · Post by **M_C** » Tue Mar 10, 2009 5:30 am

I have a SPA3102, I searched and found that it should work but I have no idea how to configure it. Is there a guide/walk through/how-to for this? If not, would somebody mind making one?

TIA...

mberlant · Post by **mberlant** » Tue Mar 10, 2009 5:39 am

Please familiarize yourself with this forum. This question was asked and answered just yesterday. The thread that deals with the configuration of a Linksys PAP2 will work just fine with any Linksys/Sipura ATA FXS Line interface (Line 1 or Line 2). If you are needing help with the fine points of making the PSTN Line do what you want, please come back and ask specific questions once you have used that other thread's guidance to get Registered with MJ's server.

M_C · Post by **M_C** » Tue Mar 10, 2009 5:48 am

mberlant wrote:Please familiarize yourself with this forum. This question was asked and answered just yesterday. The thread that deals with the configuration of a Linksys PAP2 will work just fine with any Linksys/Sipura ATA FXS Line interface (Line 1 or Line 2). If you are needing help with the fine points of making the PSTN Line do what you want, please come back and ask specific questions once you have used that other thread's guidance to get Registered with MJ's server.

Sorry, I didn't realize that the pap2 was the same thing. I'm not trying to do anything fancy, all I'm trying to do is use my MJ SIP credentials (already retrieved) on the SPA3102 and plug it into the phone jack in the wall so I don't have to use the USB dongle on a PC.

Thanks for the info...