Grandstream HT 486 (or 487) settings?

fdsfds · Post by **fdsfds** » Tue May 05, 2009 8:53 am

I tried the settings from the HT502 thread, got green light and dial tone for about 15 seconds; then it disappeared.

msiam · Post by **msiam** » Thu May 07, 2009 12:36 am

Are you using DSL? Cable? what is your set up?? Thats the kind of stuff we need to know to help. PC, router, powered USB Hub??

Boondocs · Post by **Boondocs** » Fri May 08, 2009 7:41 pm

Here are my settings for the 496

use Use NAT IP 69.0.208.27:3478

local RTP port: 16384

NAT Traversal (STUN): set to yes

make sure your outbound proxy is set and you use :5070 at the end of the address

bberris · Post by **bberris** » Thu May 21, 2009 6:05 pm

I used the setup shown in this thread. I get incoming calls fine. But outgoing calls to any number I try always go to the ymax test number with a recording saying "the test call is successful". Not.

Boondocs · Post by **Boondocs** » Sat May 23, 2009 12:42 pm

make sure all if the settings are correct. including the stun and nat ip address. you also need to add a :5070 after the proxy info.

FunkyTown · Post by **FunkyTown** » Wed Jun 03, 2009 7:28 am

if you are still having issues try to use the dial plan
dial_plan = ([1235-9]11!|411S0|<:1your_area_code>[2-9]xxxxxxS0|1[2-9]xx[2-9]xxxxxxS0| 1441!|1473!|1649!|1758!|1767!|1784!|1876!|1[26][68]4!|1[28]68!| 124[26]!|134[05]!|167[01]!|18[06]9!|011!)

squinky86 · Post by **squinky86** » Thu Jun 04, 2009 11:06 am

Boondocs wrote:make sure all if the settings are correct. including the stun and nat ip address. you also need to add a :5070 after the proxy info.

Thanks- this got me going on the 286.

FunkyTown · Post by **FunkyTown** » Thu Jun 04, 2009 12:35 pm

just to let all of you know that this method also works on the 502 as well

thanks magicjack support forum

Boondocs · Post by **Boondocs** » Thu Jun 04, 2009 7:19 pm

Glad to help.

twdy · Post by **twdy** » Wed Aug 11, 2010 4:09 am

SIP Server:proxy1.NewYork.talk4free.com
Outbound Proxy: 192.168.1.1:5070
SIP User ID: EXXXXXXXXXXXX
Authenticated ID: EXXXXXXXXXXXX
SIP Registration: Yes

This is currently working for me. Change your SIP Server based on lowest ping and shortest path of the proxy servers listed here: http://www.dslreports.com/forum/r209511 ... -are-using

magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

Grandstream HT 486 (or 487) settings?

Grandstream HT 486 (or 487) settings?

Handytone setup