PAP2T. Registration State: Can't connect to login server.

jarm · Post by **jarm** » Thu May 28, 2009 3:51 pm

Based on Magicjack in a PAP2T Configuration Pics Topics (http://www.phoneservicesupport.com/magi ... t5066.html), I did on two way manually following the pict instructions and donwloaded the PAP2TMJ.config, edited the SIP info (replacing EXX..X01 with E+my_number+01 and put on my PAP2T using Spaconf but I still receiving:

"Registration State: Can't connect to login server "

Please help

thisiskate · Post by **thisiskate** » Fri May 29, 2009 11:17 am

I am having the same problem. Can someone help please?

plazmagog · Post by **plazmagog** » Fri May 29, 2009 11:44 am

Make sure to have the ports after the addresses. Worked for me.

address:port

jarm · Post by **jarm** » Fri May 29, 2009 10:18 pm

Of course the address is: 'proxy1.miami.talk4free.com:5070'

I tried with atlanta, etc. with the same result.

thisiskate · Post by **thisiskate** » Fri May 29, 2009 10:40 pm

Worked perfectly for me!
I had to delete STUN server to get the dial tone.
Thanks plazmagog!

jarm · Post by **jarm** » Sat May 30, 2009 12:14 pm

thisiskate:

I did the STUN trick but still Can't connect to login server.
STUN Enable: NO
STUN Server:

Could you please remove your SIP info and share your config using spaconf (public or PM)?

thanks in advance

jarm · Post by **jarm** » Sat May 30, 2009 3:23 pm

DONE;

IT IS WORKING RIGHT NOW. Was my mistake, I used the password defined in my mj but actually the system use a big password (you can get it the right Proxy and all SIP info using http://www.phoneservicesupport.com/stro ... t4230.html).