FIND THE 'WORKAROUND' FOR ALL!!!!!!!!

doan866 · Post by **doan866** » Thu Jun 11, 2009 9:29 pm

This post no LONGER works as a workaround!!!
WE STILL NEED A FIX! Some users are up and some are down since update.
-------------------------------------

Okay FINALLY I GOT THE SHIT WORKING!!!!!!!!!

After being effected for days.

I do not want to post the easy solution prematurely on here because who knows if this could go down again from the security team of MJ reading this forum!

I will repost in this thread after I KNOW for sure it remains UP!

I'm Using Asterisk/Trixbox/Elastix/Freepbx even tho what I just did will work for anyone I am sure....

And some of you may hate me for saying it has nothing to do with dual passwords, register times, hardware, its unbelievable how stupid this is... There is one catch tho.

-Oh BTW here is my 'sip show registry' results on my pbx that someone asked ask me for whatever reason, and yes, it is working 100% had my magic jacks for about 3 months

Host Username Refresh State Reg.Time
proxy01.phoenix.talk4free.com: EXXXXXXXXXXX 105 Registered Thu, 11 Jun 2009 19:00:48
proxy.freedigits.net:5060 xxxxxxxxxx 105 Registered Thu, 11 Jun 2009 19:00:23
proxy.freedigits.net:5060 xxxxxxxxxx 105 Registered Thu, 11 Jun 2009 19:00:17
proxy01.phoenix.talk4free.com: EXXXXXXXXXXX 105 Registered Thu, 11 Jun 2009 19:00:48
asterisk*CLI>

The SOLUTION:

What I did was read the forums and realized that it was only affecting users who already had service for awhile and needed updates.
I went ahead and logged into my account and said 'what the hell, I'll request a NEW number to get a NEW authorization password.' I did it and used MJINFO to get the new sip information and it freakin worked. The drawback was I had to change to a new number. All of the configs remained the same on my end except for the User Agent, the NEW pass and NEW EXXXXXX01 ID. So that's it folks... I didn't want to be a prick and hold out on this but this is a simple fix for me so far. Let others know if this worked for you. BTW Your OLD NUMBER WILL STILL WORK for 30 days. As a matter of fact, after punching in the new info I tested it by calling my new number and old number, sure enough it WORKED!!!!!!!!! Old number will forward for 30 days.

Sharing is Caring!!!! REPLY if it worked for you so we ALL know

MJ still is worth it so far.

SUNBURNED · Post by **SUNBURNED** » Thu Jun 11, 2009 9:36 pm

doan866, please send me a PM so I can try it on my ac211 (old sunrocket ATA). I'll post here if it works or not, but wait for YOU to post the info. And, no, I'm not from MJ [nor do I play that annoying guy on TV infomercials...

]

Taken83oveR · Post by **Taken83oveR** » Thu Jun 11, 2009 9:43 pm

I say, only share it over PM, with those who have been around here for awhile. Yea that sucks for new members, but once they get a few post under there belts, then someone could PM them. Sharing info out in the open, got us where? Our ATA's blocked, thats where. I remember when I first started hanging around here, it was practically forbidden to share info out in the open, about the methods used to get your password, proxy info, etc.... It changed, and the admins/mods even started offering awards/prizes(like free MagicJacks) for solid post.

Not sure that was the best thing to do....

synchron · Post by **synchron** » Thu Jun 11, 2009 9:44 pm

From my experience, there are no catches with easy solutions, only difficult ones.

Synchron

Oh, btw, PM me too - no relation to Dan & co., I got an MTA6328Re ATA.

Thanx

pancho1950 · Post by **pancho1950** » Thu Jun 11, 2009 9:48 pm

doan866, please send me a PM so I can try it on my pap2t

Thank's

pagemen · Post by **pagemen** » Thu Jun 11, 2009 9:51 pm

Please send me a PM so I can try it on my PAP2. TIA!

Criatura83 · Post by **Criatura83** » Thu Jun 11, 2009 9:53 pm

doan can you please send me a pm also, i'm desperate

stupid2ass · Post by **stupid2ass** » Thu Jun 11, 2009 10:01 pm

i am new here too but i just got my magicjack working with xlite this week only to be unauthorized today after the upgrade. would appreciate any help via pm. tia

grillovillegas · Post by **grillovillegas** » Thu Jun 11, 2009 10:01 pm

Hi pal please share the secret with me i have two mj
and no one is working.....

Thanks

Praetorian · Post by **Praetorian** » Thu Jun 11, 2009 10:05 pm

Please PM me as well and Ill help test this solution. I have been spending day and night for 2 days trying to see if I could fix this ATA issue.

Praetorian

magic4205 · Post by **magic4205** » Thu Jun 11, 2009 10:06 pm

I would appreciate if someone could pm me. I have couple of magicjack and trying to find the new location of pwd in the dump. I beleive they have changed the location of the pwd.

voxtrading · Post by **voxtrading** » Thu Jun 11, 2009 10:11 pm

Please PM the fix to me too. Thanks

grillovillegas · Post by **grillovillegas** » Thu Jun 11, 2009 10:11 pm

Como on pal share the wisdom with all of us , thats what the forum is it for...... Thanks !!!!!1

VoipDude · Post by **VoipDude** » Thu Jun 11, 2009 10:13 pm

Would really appreciate a PM.

I've been trying everything I can think of since the upgrade knocked out my ATA. I'm using a PAP2T-NA.

Using the dongle sucks due to poor call quality.

Please, help a brother out

djorn2k · Post by **djorn2k** » Thu Jun 11, 2009 10:14 pm

I have a linksys SPA2102. Let me know if your solution will fix the issues with these ATA. Thanks

gharib2001 · Post by **gharib2001** » Thu Jun 11, 2009 10:20 pm

we would higly appreciate if you give us the secret as we are waiting eagerly since three days and spent hours and hours to get any success but not a damn thing So Plz Post it here for all of us. So we can be benifits from your secret.

DopeyJones · Post by **DopeyJones** » Thu Jun 11, 2009 10:23 pm

Help would be much appreciated here too been racking my brain all day trying to figure out what might work!

a_hungk · Post by **a_hungk** » Thu Jun 11, 2009 10:24 pm

PLz send a Pm if you got anything for innomedia MTA 6328-2re tyyyyyyy.

jumpin jack · Post by **jumpin jack** » Thu Jun 11, 2009 10:26 pm

A PM my way would help. Thanks

hmangnx · Post by **hmangnx** » Thu Jun 11, 2009 10:28 pm

Seems like someone is pulling our legs... =/

jumpin jack wrote:A PM my way would help. Thanks

j1sjeep · Post by **j1sjeep** » Thu Jun 11, 2009 10:28 pm

I'll take the PM, or a hint... This has become a friggin quest for me!

argyle · Post by **argyle** » Thu Jun 11, 2009 10:29 pm

If somebody can PM me the info it would be much appreciated. I've been going crazy trying to figure this out. Thanks.

zixy_tris · Post by **zixy_tris** » Thu Jun 11, 2009 10:37 pm

PM me also. I want these Mjs to work. I have like 5 boxes around and starting to hate them

peterhui · Post by **peterhui** » Thu Jun 11, 2009 10:45 pm

Please PM Me the solution Broth....
I just finish setup my new MJ less than 30 days ago,
I don't want to give up the device and join for another VOIP service.
Thanks for your effort!!!!

jeffnyc · Post by **jeffnyc** » Thu Jun 11, 2009 10:47 pm

Has anyone gotten a pm from doan866

doan866 · Post by **doan866** » Thu Jun 11, 2009 10:48 pm

Hey all.... get some sleep or relax for now.. I will post solution up when I get back home.. if somone else has ran into the same fix or other fix prior to my return then congrats... I just want to give my accounts ample time to work before mj gets a large influx of traffic and starts looking in this forum to shutdown users.

Time will tell before this happens again.

newwonder01 · Post by **newwonder01** » Thu Jun 11, 2009 10:48 pm

Hi,

Can you PM me.

Thanks

mdima · Post by **mdima** » Thu Jun 11, 2009 10:50 pm

Did anyone got this fix working on Pap2

hesantos2004 · Post by **hesantos2004** » Thu Jun 11, 2009 10:55 pm

Hi,

Can you PM me.

Thanks

carrick · Post by **carrick** » Thu Jun 11, 2009 10:56 pm

Please PM me. I have been around here all the time to get my pap2 working.

Thanks!

felipeg007 · Post by **felipeg007** » Thu Jun 11, 2009 11:00 pm

i have been runing for 6 months on dlink dvg-2001s
and now nothing.

it appears that the passwords and proxy's where updated.
the old proxy dns entries are pointing to the new servers so thats not the issue. i am wondering if they changed the ports on us.
i was running ports 5070 because 5060 did not work for me.

kp · Post by kp » Thu Jun 11, 2009 11:16 pm

Please PM details,

Also has anyone been able to confirm this yet or not ?

stickfigurefred · Post by **stickfigurefred** » Thu Jun 11, 2009 11:19 pm

PM details please. 2 are down on PAP2T but xlite is registering and I can make and receive calls still.

reddingc · Post by **reddingc** » Thu Jun 11, 2009 11:19 pm

what is this a teaser? What's the fix?

Taken83oveR · Post by **Taken83oveR** » Thu Jun 11, 2009 11:22 pm

Just to confirm. I have not received a Pm, and the author of this thread PM box is probably full by now. Stop requesting, please. If any of us get a PM, we will share with some of the other members.

smartripper77 · Post by **smartripper77** » Thu Jun 11, 2009 11:23 pm

There are alot many smart ppl trying to solve this puzzle.
If one "genius" has figure out how make it work, others will follow soon..

Let the only "genius" enjoy it for the night.

Hats off to you, and Salute to all other who are still trying to solve this.

oxigenado · Post by **oxigenado** » Thu Jun 11, 2009 11:24 pm

could some1 pls share with me, pm pls pls, pretty pls.

thx

thisiskate · Post by **thisiskate** » Thu Jun 11, 2009 11:26 pm

PLEASE PM me... I have a PAP2T... Thanks in advance...

oliverda · Post by **oliverda** » Thu Jun 11, 2009 11:27 pm

doan866 wrote:Hey all.... get some sleep or relax for now.. I will post solution up when I get back home.. if somone else has ran into the same fix or other fix prior to my return then congrats... I just want to give my accounts ample time to work before mj gets a large influx of traffic and starts looking in this forum to shutdown users.

Time will tell before this happens again.

I agree. There is not point to have a solution if we don't know if it works at 100% yet. Also I wouldnt recomend to have many ppl using the fix at the same time for now. Lets have the ones with the most experience to get this rigth. I'm sure we all will have the solution soon.

Taken83oveR · Post by **Taken83oveR** » Thu Jun 11, 2009 11:31 pm

Is that some kind of joke? Makes no difference if we use our dongles or ATA's..... We will be on the servers one way or another. (in reference to large influx of traffic)

hmangnx · Post by **hmangnx** » Thu Jun 11, 2009 11:40 pm

As I've said before, this is a joke. He's pulling our chain...

Taken83oveR wrote:Is that some kind of joke? Makes no difference if we use our dongles or ATA's..... We will be on the servers one way or another. (in reference to large influx of traffic)

jeffnyc · Post by **jeffnyc** » Thu Jun 11, 2009 11:43 pm

reddingc wrote:what is this a teaser? What's the fix?

It sounds more like a taunt. (S)He should have substantiated it with at least a pm to one or two people that can confirm. But instead he advised everyone to go to sleep and wait til morning.

felipeg007 · Post by **felipeg007** » Thu Jun 11, 2009 11:56 pm

i found some more info , it appears the mj is running provisioning servers
via port 443 to an address at xo communication

https://prov1.talk4free.com

it is also opening and "rfe" connection to 69.4.236.236

j1sjeep · Post by **j1sjeep** » Fri Jun 12, 2009 12:18 am

Cut the guy some slack... Personally, I would have selected a few of the sharper folks from the forum to test under the radar to compare notes before saying anything. But hey... I can wait another day. In the meantime, I'll sleep on it... Thats when I usually figure these things out.

jay11 · Post by **jay11** » Fri Jun 12, 2009 12:19 am

Please PM Me the solution....

Thanks

hodula1 · Post by **hodula1** » Fri Jun 12, 2009 12:26 am

Please PM me also.

Thanks!

mjsprinter · Post by **mjsprinter** » Fri Jun 12, 2009 12:26 am

Thanks Thanks Thanks!

fmflex · Post by **fmflex** » Fri Jun 12, 2009 12:41 am

Just wanted to chime in again. I have two MJ up and running both in and out on a pap2. Not sure why. The only thing that I can think off is when all this went down, my ata was unplugged and sitting at a friends house. I gave it to her to try it out on Tuesday morning and she never plugged it in. When I took it back today to see what the issue was and try to figure it out, I got home plugged in and everything was working. Didn't do any updates either. So maybe this will help.

rajeshvb · Post by **rajeshvb** » Fri Jun 12, 2009 12:45 am

doan, I'm using spa1001 please PM also so i can test it thx

rlwatson · Post by **rlwatson** » Fri Jun 12, 2009 12:45 am

doan866 Hook me up PM this way
spa 2102

magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

FIND THE 'WORKAROUND' FOR ALL!!!!!!!!

FIND THE 'WORKAROUND' FOR ALL!!!!!!!!

Hey Bud

i got a innomedia MTA 6328-2Re

Please help me out!!!

Desparately need a solution

boyz i am in the same boat

No worries

Re: FOUND THE FIX FOR ALL!!!!!!!!

more info

hey

Please PM me the solution

Still up and running