Fastest way to test your Username and Password from MJ?

[yazyazoo]

So I decided to try and get my whole MJMD5 setup on my DD-WRT router and PAP2T ATA.

I tried using Stroths Util 1.6 to get my SIPInfo. What a nightmare. Nothing recognizes my MagicJack and keeps giving a Config error in Step 3 which I can't find where MagicJack installed it's software. So I gave up and tried Password Finder 2.2. At least it gave me a password and username.

I setup my Router with DD-WRT, which took awhile because I figured out I needed a mini version rather than a full to free up some JFFS space.

I then TRIED to configure the ATA with the thread with pictures and downloaded config file. That has to be the hardest part. I put in my username and password and pointed the proxy to my router (192.168.1.1:5070) rather than the MJ proxy.

I still have no connection. Tried changing a few things here are there.

Then I think, what if the username and password are wrong. I am wasting my time here.

Is there a good and fast way to test your username and password before moving on?

[synchron]

From what I recall, make sure you use the 20 hex character string that passwordfinder spits back the most. Usually you get like 1 or 2 oddball ones it picks up and the other one that is repeated like at least 8 times is the one you use.

Synchron

[nulland]

Is mjproxy running on the router? Telnet to the router and issue a "top" command to check if mjproxy is up. BTW, mjproxy will not run if router is offline. It will put out an error message that says invalid web address when router is offline. If mjproxy is up, then the problem is in the setup of the ATA.

[yazyazoo]

Thanks guys for the input. I re-did the Password Finder and tried a different one. It WORKS!! Thanks.

[cucu007]

Hi there,
I just ordered my pap2t adapter from freebay, it should be here by the end of the week. I got my router ASUS configure with mjproxy and the user name and password from passwordfinder, can you provide me the setting in the PAP2T adapter, that's the only thing I am missing, thank you in advance.

[yazyazoo]

I used these instructions and downloaded the config file.

http://phoneservicesupport.com/magicjac ... t5066.html