ATA device
Moderators: Bill Smith, Pilot
ATA device
hey guys,
Just unlocked m y RTP300 from vonage and I do have my sip credentials.
I am having trouble configuring the ata
Has anyone configured this ata to run with sip credentials let me know
Just unlocked m y RTP300 from vonage and I do have my sip credentials.
I am having trouble configuring the ata
Has anyone configured this ata to run with sip credentials let me know
I have not used this device, but I believe it's very similar to other Linksys/Sipura units.
Here are basic settings. These values are examples -- of course, use your actual values.
Proxy: proxy1.stlouis.talk4free.com:5070
Outbound Proxy: <leave blank>
Use Outbound Proxy: no
Display Name: John Doe
User ID: E212867530901
Password: SECRETPW20CHARACTERS
Auth ID: E212867530901
If the above does not help, verify that a PC connected to a LAN port can access the Internet. If not, fix that first.
If your device is behind another router, try connecting it directly to your DSL modem.
If still no luck, provide details on your config (modem, other router, etc.) and state precisely what is going wrong.
Note that this usage is presently not permitted by the TOS, although MJ stated that a BYOD option would be available this month.
Here are basic settings. These values are examples -- of course, use your actual values.
Proxy: proxy1.stlouis.talk4free.com:5070
Outbound Proxy: <leave blank>
Use Outbound Proxy: no
Display Name: John Doe
User ID: E212867530901
Password: SECRETPW20CHARACTERS
Auth ID: E212867530901
If the above does not help, verify that a PC connected to a LAN port can access the Internet. If not, fix that first.
If your device is behind another router, try connecting it directly to your DSL modem.
If still no luck, provide details on your config (modem, other router, etc.) and state precisely what is going wrong.
Note that this usage is presently not permitted by the TOS, although MJ stated that a BYOD option would be available this month.
almost
Ok here's my setup
MOdem Cable to rtp300
I entered all the info you said and i finally got it to register i get dial tone but when i make a call it just rings for about 2 mins then stops. called my cell btw. it worked once. another thing i notice is that whe ni dial a number takes a while (20 sec) before i hear it dialing
MOdem Cable to rtp300
I entered all the info you said and i finally got it to register i get dial tone but when i make a call it just rings for about 2 mins then stops. called my cell btw. it worked once. another thing i notice is that whe ni dial a number takes a while (20 sec) before i hear it dialing
dude why ya post all your sip info?Stewart wrote:I have not used this device, but I believe it's very similar to other Linksys/Sipura units.
Here are basic settings. These values are examples -- of course, use your actual values.
Proxy: proxy1.stlouis.talk4free.com:5070
Outbound Proxy: <leave blank>
Use Outbound Proxy: no
Display Name: John Doe
User ID: E212867530901
Password: SECRETPW20CHARACTERS
Auth ID: E212867530901
If the above does not help, verify that a PC connected to a LAN port can access the Internet. If not, fix that first.
If your device is behind another router, try connecting it directly to your DSL modem.
If still no luck, provide details on your config (modem, other router, etc.) and state precisely what is going wrong.
Note that this usage is presently not permitted by the TOS, although MJ stated that a BYOD option would be available this month.
Kumar
-
- magicJack Apprentice
- Posts: 21
- Joined: Sat Feb 02, 2008 10:14 pm
That's not his SIP info... It's Jenny's.kumar wrote:dude why ya post all your sip info?Stewart wrote:I have not used this device, but I believe it's very similar to other Linksys/Sipura units.
Here are basic settings. These values are examples -- of course, use your actual values.
Proxy: proxy1.stlouis.talk4free.com:5070
Outbound Proxy: <leave blank>
Use Outbound Proxy: no
Display Name: John Doe
User ID: E212867530901
Password: SECRETPW20CHARACTERS
Auth ID: E212867530901
If the above does not help, verify that a PC connected to a LAN port can access the Internet. If not, fix that first.
If your device is behind another router, try connecting it directly to your DSL modem.
If still no luck, provide details on your config (modem, other router, etc.) and state precisely what is going wrong.
Note that this usage is presently not permitted by the TOS, although MJ stated that a BYOD option would be available this month.
Kumar
Codec should be G711U.
Anything to do with STUN or NAT should be off.
If no luck, post all your settings (advanced) (mask personal info), also what kind of modem do you have?
If still no luck, you'll have to use SIP debug or capture traffic to see what's going wrong.
Have you been able to make this device work with other providers?
Anything to do with STUN or NAT should be off.
If no luck, post all your settings (advanced) (mask personal info), also what kind of modem do you have?
If still no luck, you'll have to use SIP debug or capture traffic to see what's going wrong.
Have you been able to make this device work with other providers?
ok
stun server is off so is nat.
when i get home i will save screen shots of my settings.
i have provisioning set to off aswell. do i have to do anything with xml file? I have my decrypted one.
not sure because i did flash it with newer firmware
when i get home i will save screen shots of my settings.
i have provisioning set to off aswell. do i have to do anything with xml file? I have my decrypted one.
not sure because i did flash it with newer firmware
That's funny!!!MagicHack wrote:That's not his SIP info... It's Jenny's.kumar wrote:dude why ya post all your sip info?Stewart wrote:I have not used this device, but I believe it's very similar to other Linksys/Sipura units.
Here are basic settings. These values are examples -- of course, use your actual values.
Proxy: proxy1.stlouis.talk4free.com:5070
Outbound Proxy: <leave blank>
Use Outbound Proxy: no
Display Name: John Doe
User ID: E212867530901
Password: SECRETPW20CHARACTERS
Auth ID: E212867530901
If the above does not help, verify that a PC connected to a LAN port can access the Internet. If not, fix that first.
If your device is behind another router, try connecting it directly to your DSL modem.
If still no luck, provide details on your config (modem, other router, etc.) and state precisely what is going wrong.
Note that this usage is presently not permitted by the TOS, although MJ stated that a BYOD option would be available this month.
Kumar
Anyway, I just purchased a PAP2 (V.1) on closeout from Staples and am trying to figure out if I can make it work with my MJ. Is it worth the effort or should I return it and get my $20 back?
Thanks
If it's unlocked, very little effort should be needed to set it up.
If you need to unlock it, searching http://www.dslreports.com/forum/voip will likely find a useful thread. In some cases, it's a lot of work. It may be less work if you unlock it before connecting it to the Internet.
If you need to unlock it, searching http://www.dslreports.com/forum/voip will likely find a useful thread. In some cases, it's a lot of work. It may be less work if you unlock it before connecting it to the Internet.