I know about the PAP2 that has been beaten to death. I never paid attention to it before really but now thinking of ATA. Pls let me know if this would work & also If I have Gizmo5( I also have Google Voice), if it can also work with that.
It seems you cab do 2 tel numbers & also fax that I need for work!
here is the specs:
Linksys PAP2-NA VoIP Adapter
Supported Protocols: SIP
Status: Unlocked
Ports: 2 FXS + 1 Ethernet
*This device is not compatible with Vonage
*The PAP2 has been upgraded by Linksys to the PAP2T, all orders for the PAP2 will be shipped the replacement model.
PAP2 -NA Product Description
The Linksys PAP2-NA Phone Adapter enables high-quality feature-rich telephone service through your cable or DSL Internet connection. Just plug it into your home Router or Gateway and use the two standard telephone jacks to connect your existing phones or fax machines. Each phone jack operates independently, with separate phone service and phone numbers -- like having two phone lines. With an appropriate Internet telephone service provider, you'll get clear telephone reception and reliable fax connections, even while using the Internet at the same time for normal data operations.
PAP2-NA Product Features
* Enables feature-rich telephone service over your cable or DSL Internet connection
* Two standard telephone jacks for your phones or fax machines, with independent phone numbers
* High quality, clear sounding voice service simultaneous with Internet use
* Compatible with all common telephone features: Caller ID, Call Waiting, Voicemail, etc.
With Internet telephony, along with low domestic and international phone rates, an impressive array of special phone features are available. Choose your preferred free local dialing US area code, regardless of where you live. Or add a virtual phone number in any area code, forwarded to your Internet phone. You can even add a toll-free number. The Linksys Phone Adapter is compatible with these and all of the other special telephone features that are available from your telephone service provider, such as Caller ID, Call Waiting, Voicemail, Call Forwarding, Distinctive Ring, etc.
PAP2-NA Telephony Features
* The PAP2 has two voice ports (RJ-11) for analog phones or fax machines with two independent telephone numbers
* The PAP2 has one RJ-45 port for 10Base-T Ethernet connection
* The PAP2 supports Dynamic Host Configuration Protocol (DHCP)
* The PAP2 supports Session Initiation Protocol (SIP)
* The PAP2 supports multiple voice compression G.711, G.726, G.729, and G.723.1
* Web-based configuration through a built-in web server
* Telephone key pad configuration via voice prompts
* Supports DTMF tone detection and generation
* Supports FSK Caller ID, DTMF Caller ID and FSK VMWI
* Support echo cancellation and Voice Activity Detection (VAD)
* Password protected access and configuration
* Supports auto-provisioning with remote firmware upgrade
PAP2-NA Specifications
Standards IEEE 802.3 (10BaseT), IEEE 802.3u (100BaseTX)
Ports One 10/100 RJ-45 Network Port, Two Standard Phone Ports, One Power Port
Cabling Type RJ-45 Ethernet Category 5, RJ-11 Standard Phone Cable
LEDs Power, Ethernet, Phone1, Phone2
Voice Protocol Session Initiation Protocol (SIP v2)
Voice Codecs G.711 a-law, G.711μ-law, G.726, G.729 A, G.723.1
Ringer Equivalence Number (REN) 5 REN per RJ-11 port
Ring Frequency 10 Hz - 40 Hz
FXS Port Impedance Eight Configurable Setting Including North America 600 ohms, European CTR21
Ring Voltage 60 - 90 Vrms Configurable
Security Features Password-Protected Administration
Using PAP2( Linksys PAP2-NA W/FXS 2 Ports ) with MJ?
Moderators: Bill Smith, Pilot
Using PAP2( Linksys PAP2-NA W/FXS 2 Ports ) with MJ?
Last edited by kakpataka on Mon Apr 26, 2010 12:33 am, edited 1 time in total.