Dlink vta-vr

[tritron777]

I have dlink-vr and managed to get it to work with 3cx and MJ. So i can recive faxes using it but than I have problem dialing number 918888771655 the dlink seems to be cutting off last two digits so 188887716 is being send to MJ.
Does anyone knows how to change how many digits dlink will send ?

[Everton]

I have dlink-vr and managed to get it to work with 3cx and MJ. So i can recive faxes using it but than I have problem dialing number 918888771655 the dlink seems to be cutting off last two digits so 188887716 is being send to MJ.
Does anyone knows how to change how many digits dlink will send ?

I'm not 100% sure, but it sounds as if you dial plan on the VTA-VR is not setup to dial 12-digits. I'm assuming that the VTA-VR is unlock? If so, can you change and SAVE your dial plan? If not, you could load one of the newer available "modified" firmware which does allow easy change of your dial plan!

[tritron777]

I have 9 version of firmware and i trying to figureout how to change this line to allow dialing using 3cx
(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)

[tritron777]

Well this allows to dial extensions and any number
[12][01]xxxT|[349]11T|[1-9]xx[1-9]xxxxxxT|1[1-9]xx[1-9]xxxxxxT|*xx.T|xx.T