Walk-through to configure a different softphone

drjekyl · Post by **drjekyl** » Sat Feb 02, 2008 6:21 pm

Prove it.

SpamBox · Post by **SpamBox** » Sat Feb 02, 2008 8:03 pm

SUNBURNED wrote:Can someone PM me with the updated way to get MJ's SIP credentials? I want to use my old Sunrocket ATA (AC-211) too. And, no, I'm not an undercover from MJ.

You'll have to wait until magicJack allows you to use your own device. It's "coming soon" but not yet.

SUNBURNED · Post by **SUNBURNED** » Sat Feb 02, 2008 11:02 pm

So others here are able to use their old ATA boxes now, but others have to wait until MJ decides to allow BYOD (which may not happen, and is just speculation)? Where's the love? Help a brother out.

There is no way to prove it. Admin can verify my post is from a very small town in PA (NOTE to admin: please don't post my IP!), but other than that, how would I prove it? Legally, if I post I am not from MJ, I wouldn't be allowed to burn anyone posting here anyways. Why the paranoia?

SpamBox · Post by **SpamBox** » Mon Feb 04, 2008 9:25 am

SUNBURNED wrote:So others here are able to use their old ATA boxes now, but others have to wait until MJ decides to allow BYOD (which may not happen, and is just speculation)? Where's the love? Help a brother out.
There is no way to prove it. Admin can verify my post is from a very small town in PA (NOTE to admin: please don't post my IP!), but other than that, how would I prove it? Legally, if I post I am not from MJ, I wouldn't be allowed to burn anyone posting here anyways. Why the paranoia?

Who the heck is still able to use their ATA's? That was before an upgrade back in late December. Catch up with the new posts and you'll see ATA use is out right now.

Also, it's easy to spoof IP. So that doesn't do any to prove anything. I could make it look like I'm in the Bahamas, or Brazil or your ip - so even if there was a way, checking out an ip doesn't do jack. Why don't you send a small amout ($1) to someone via PayPal - it could still be faked but at least it's more difficult and if you are able to fake PayPal then you're also a criminal and not with MJ.

The reason you see a lot of ATA talk still is because a lot of us are still using ATAs for other services.

SUNBURNED · Post by **SUNBURNED** » Tue Feb 05, 2008 7:39 pm

Gerry_52 · Post by **Gerry_52** » Tue Feb 05, 2008 8:16 pm

Hey Sunburned.....send me money via PayPal, for enough cash I'll tell them anything you want me to...

kumar · Post by **kumar** » Tue Feb 05, 2008 8:20 pm

@ Sunburned...What area in PA?
Kumar

dan · Post by **dan** » Tue Feb 05, 2008 8:30 pm

Just curious how you guys got the info to obtain your sip credentials? Most likely someone showed you. I can think of one person in-particular. Didn't the person who showed you take a risk?

BTW: Sunburned the answer to your questions has been posted on this forum and the posts are still up. Do a little digging you should find what your looking for

Dan

Post by **laserjobs** » Tue Feb 05, 2008 9:52 pm

dan wrote:Just curious how you guys got the info to obtain your sip credentials? Most likely someone showed you. I can think of one person in-particular. Didn't the person who showed you take a risk?

BTW: Sunburned the answer to your questions has been posted on this forum and the posts are still up. Do a little digging you should find what your looking for

Dan

Are you talking about Amange?

dan · Post by **dan** » Tue Feb 05, 2008 10:05 pm

no this person did not work for MJ.. Not Amange

BTW this method of obtaining sip credentials was used 8 or 9 months ago. before fiddler

Post by **laserjobs** » Wed Feb 06, 2008 2:50 pm

dan wrote:no this person did not work for MJ.. Not Amange

BTW this method of obtaining sip credentials was used 8 or 9 months ago. before fiddler

In the early stages the boys at MJ helped us out with a lot of things. That is before lockdown happened.

SUNBURNED · Post by **SUNBURNED** » Thu Feb 07, 2008 10:20 pm

Thanks Dan. I'm trying your suggestions.

SUNBURNED · Post by **SUNBURNED** » Fri Feb 08, 2008 11:15 pm

I just wnated to publically thank Dan for all his help and patience through this process. He is most definitely a knowledgable and helpful man. Dan, you are the SHIZ-NOT dude!

Thank you very, very much!!!

gooney · Post by **gooney** » Sat Mar 01, 2008 2:00 pm

SUNBURNED wrote:I just wnated to publically thank Dan for all his help and patience through this process. He is most definitely a knowledgable and helpful man. Dan, you are the SHIZ-NOT dude!

Thank you very, very much!!!

Since you know how now.... maybe you can pm me this info hahahahaha

EDIT: Just want to thank the person who helped me with this (you know who you are)

AlpineMan · Post by **AlpineMan** » Sun Mar 02, 2008 2:29 am

I'd like to use a Linksys PAP2T device instead of the USB dongle. Someone please PM me how to get my SIP credentials. Thanks in advance!!!

newwonder01 · Post by **newwonder01** » Sun Mar 02, 2008 10:56 pm

gooney wrote:
SUNBURNED wrote:I just wnated to publically thank Dan for all his help and patience through this process. He is most definitely a knowledgable and helpful man. Dan, you are the SHIZ-NOT dude!

Thank you very, very much!!!
Since you know how now.... maybe you can pm me this info hahahahaha

EDIT: Just want to thank the person who helped me with this (you know who you are)

You know now, can you PM me.

Thanks

gooney · Post by **gooney** » Mon Mar 03, 2008 11:48 am

newwonder01 wrote:
You know now, can you PM me.

Thanks

If you search the forums the answer is there... you have to look real good... thats what i did... and no one pmed me.

AlpineMan wrote:I'd like to use a Linksys PAP2T device instead of the USB dongle. Someone please PM me how to get my SIP credentials. Thanks in advance!!!

same goes to you.

newwonder01 · Post by **newwonder01** » Tue Mar 04, 2008 10:29 pm

Thanks for the reply,

But I couldn't able to get any method that it is working now. All of them outdated.

Can you point out the method which is working now.

Thanks

halcut · Post by **halcut** » Thu Mar 06, 2008 3:21 pm

I am also looking for the credentials.. Can somebody please pm me the method? Thanks in advance.

sashawn · Post by **sashawn** » Sat Mar 08, 2008 3:29 pm

If I use a different soft phone such as x-lite, can I get MJ to keep from popping up every time someone uses the phone? Also is there anyone out there who can please PM me with instructions to obtain the info necessary to setup x-lite? Thanks!

kumar · Post by **kumar** » Sat Mar 08, 2008 8:35 pm

Err you can use AutoSizer to keep your MJ window from poppin up.
Peace
Kumar

twdy · Post by **twdy** » Mon Mar 10, 2008 8:05 am

Doubt they will go BYOD since they can sell ad-space on the softphone. The $20 a year charge can't cover the included DID and unlimited phone usage.

codaine · Post by **codaine** » Fri Mar 14, 2008 2:31 am

Hey ppl,

I just got my MJ and directly passed on to recovering SIP credentials.

Good news is, It is possible to recover the password without any brute forcing. I have just recovered my SIP password by reverse engineering. It took almost about an hour.

Bad news is, my password was 20 characters long, both uppercase characters and digits. So brute forcing is not a good way to go by

I have started working on a little utility to retrieve the password. I will release as soon as it is done.

Have fun

tvland · Post by **tvland** » Fri Mar 14, 2008 9:36 am

I'd like to get my password as well. I'd like to know how you did that. PM me if you don't want it public.

codaine · Post by **codaine** » Fri Mar 14, 2008 2:38 pm

Hi,

I am not really a big fan of the PMing. I will post the information, if not the tool, publicly.
I don't see a reason to pick who to PM to. And this forum is where this information is supposed to be shared.

The reason behind my post is to stop anyone new to this issue, trying to brute-force their SIP passwords, spending resources for weeks.

And for the "been there, done that" attitude; I did not suggest my way was the only, or the best way. But, since I leave the decryption to the original software itself, and pull information out of it, I may say this will keep working as long as there is no *serious* changes in the software itself.

So, my little utility, will not provide anyone with the way to get information for any other magicjacks, since it pulls information right out of the software.

I'll be updating the forum about this.

msiam · Post by **msiam** » Sat Mar 15, 2008 12:00 am

DaaYYYemmmm!!!

gooney · Post by **gooney** » Sat Mar 15, 2008 8:53 am

codaine wrote:Hi,

I am not really a big fan of the PMing. I will post the information, if not the tool, publicly.
I don't see a reason to pick who to PM to. And this forum is where this information is supposed to be shared.

The reason behind my post is to stop anyone new to this issue, trying to brute-force their SIP passwords, spending resources for weeks.

And for the "been there, done that" attitude; I did not suggest my way was the only, or the best way. But, since I leave the decryption to the original software itself, and pull information out of it, I may say this will keep working as long as there is no *serious* changes in the software itself.

So, my little utility, will not provide anyone with the way to get information for any other magicjacks, since it pulls information right out of the software.

I'll be updating the forum about this.

Stop teasing already... just post it, what is taking you so long? I'm sure dan wants to know about this little tool of yours... maybe he might consider the BYOD option sooner hahahha

jeffnyc · Post by **jeffnyc** » Sat Mar 15, 2008 10:03 am

Just remember that we are MJ's guinea pigs. When we find a hole, and publish it here, MJ will then close it.

gooney · Post by **gooney** » Sat Mar 15, 2008 11:22 am

jeffnyc wrote:Just remember that we are MJ's guinea pigs. When we find a hole, and publish it here, MJ will then close it.

Thats good...MJ can learn from this... right?

kingfisher1111 · Post by **kingfisher1111** » Sun Mar 16, 2008 10:07 am

Don't post anything here..Please don't show us that you are techie guys..Enough..
Thanks

newwonder01 · Post by **newwonder01** » Mon Mar 17, 2008 5:57 pm

Let him say, we have been trying very hard to get a method.

tvland · Post by **tvland** » Fri Apr 11, 2008 4:17 pm

A few drawbacks with X-Lite that I found are (also with SJphone or other softphones):

You have to dial via the softphone
Telephone connected to MagicJack does not ring on incoming calls
You must press send to accept incoming calls
Hanging up on phone does not switch to other incoming or established call (this must be done on the softphone)
No option for copy and paste dialing
Only 1 proxy server can be in settings

These features seem exclusive to the MJ softphone software.

semicharm · Post by **semicharm** » Thu Jun 12, 2008 9:51 pm

tvland wrote:These features seem exclusive to the MJ softphone software.

OH BUGGER! With all the talk of people using ATAs getting their accounts revoked and now you mean to tell me that using another softphone will hobble my service!? Now I wish I hadn't wasted all that time getting my SIP creds!

I DID actually get them BTW, but I guess that's sort of a moot point now...

Oh well, replacing the skin at least gets rid of the ads.

vgjhav · Post by **vgjhav** » Fri Jun 27, 2008 1:29 pm

I am soo... lost..>Can someone help me find my sip info. I brought a wrtp54g and am trying to set it up. I found my serial number and know my number. Where do i go from here? Do i configure my own custom server or something. I did try searching the forums in vain, lots of the techno mumble got me more confused...

Any help appreciated.

Taken83oveR · Post by **Taken83oveR** » Fri Jun 27, 2008 7:36 pm

I love when you take the time to help someone, and can't even get a simple thank you. Anywho, I hope you did get it working, but I guess I am doomed to never know sense you, never got back to me (via pm). It's just plan rude. Take note, a simple thank you goes along way.

Trebuin · Post by **Trebuin** » Tue Jul 01, 2008 8:14 pm

Calling home from Japan only works so well setting the proxy to LA.

ramjet555 · Post by **ramjet555** » Sat Jul 19, 2008 12:44 pm

I tried F idler, got a great long line of code, which I do not know how to decode.
I'd like to be able to use my Linksys WP330 internet phone.
Has anyone been able to pull out their magic jack user and password
and get their Linksys phone working?

Thanks

ramjet555 · Post by **ramjet555** » Sat Jul 19, 2008 2:09 pm

I tried Fidler, got a great long line of code, which I do not know how to decode.
I'd like to be able to use my Linksys WP330 internet phone.
Has anyone been able to pull out their magic jack user and password
and get their Linksys phone working?

Thanks

Cybernaut · Post by **Cybernaut** » Wed Aug 06, 2008 4:54 am

Can someone be so kind as to PM me with a method of obtaining the MJ SIP info so I can use it with my Linksys SPA2102-R ATA. Pleeeeeeze. A big THANK YOU in advance.

tnnm · Post by **tnnm** » Wed Aug 06, 2008 4:09 pm

Likewise, would someone please be so kind as to PM me with instructions on how to obtain this?

I can verify that I'm not an MJ employee but will not share how until someone PMs me as it involves calling my actual employer by dialing a number on their website and asking for me. I just don't want to publicly disclose who I work for, so anyone who PMs me can request this verification method first.

meister_sd · Post by **meister_sd** » Wed Aug 06, 2008 7:43 pm

tnnm wrote:Likewise, would someone please be so kind as to PM me with instructions on how to obtain this?

This thread, Page 1, 6th poster

thechad · Post by **thechad** » Thu Aug 07, 2008 2:22 pm

Hey meister_sd ! Good tip, my friend!

daisuke · Post by **daisuke** » Mon Aug 11, 2008 2:49 am

I am also looking for the credentials.. Can somebody please pm me the method? Thanks in advance.

hype8912 · Post by **hype8912** » Wed Aug 13, 2008 12:56 am

Could someone PM me the instructions for getting my SIP credentials for setting up Gizmo5. I tried using fiddler but that was after they fixed the glitch. Anyway thanks in advance.

TexGuy · Post by **TexGuy** » Thu Aug 14, 2008 8:40 pm

I'm stuck on the sip password still...........

BooDaddy · Post by **BooDaddy** » Fri Aug 15, 2008 9:59 pm

ME to.. my friend. I have my ATA unlocked... but I have searched until my eyes are bleeding and I cant seem to figure out how to get my sip creds.

TexGuy · Post by **TexGuy** » Sat Aug 16, 2008 12:01 am

I need unlimited LD on my eyebeam by Monday for my work so it's a must have this weekend.

angel-78 · Post by **angel-78** » Sat Aug 16, 2008 3:03 am

I have read this forum from top to bottom (one problem is that it is so slow) and finally today I gave up on all the sniffers and brute force cracker and tried a different approach and found it. Anybody with hope that someone here will help them is mistaken. First because everyone that has it working wants it to stay working and second because the PM system is really slow. All I will say is that I found the info that pointed to the things i tried today on another website. Google is your friend.

BooDaddy · Post by **BooDaddy** » Sat Aug 16, 2008 11:22 am

would you care to drop a hint as to what you used to search for on google?

not asking for a handout, just some direction as to where I should do my searching

BooDaddy · Post by **BooDaddy** » Sat Aug 16, 2008 12:21 pm

WEll I need some help..

I been logging some things... and I found two lines that are interesting. Take a look... let me know by PM if I am on the right track or not please:

I have posted this from my log dump. I have replaced some of the numbers with a "#" sign.

First thing of interest:
From: "unknown"<sip:E4##9#7#[email protected]#6.1##.198>;tag=4c9c##c35#0

Second thing of intrerest (I am thinking this is it.... cause of the MD5)
Authorization: Digest username="E4##2##70#01",realm="stratus.com",nonce="671#699a_0##37",uri="sip:423##1##[email protected]##.198",response="33###363f2###6d0a939###45bb33473",algorithm=MD5

Again, I have changed some info that would be private with "#" signs. If someone can cofirm I am on the right track, I will delete this message so as not to give anything away.

------EDIT-----

This is not what I used to find my creds. I used a different method... I didnt get anything of use with the above info. This is to help those in their search for their creds.

magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

Walk-through to configure a different softphone

Update on the subject

Re: Update on the subject

pm'ing

Re: pm'ing

Lost

Getting SIP and Password?

Getting SIP and Password?

SIP Password Method Assistance

Re: SIP Password Method Assistance

Finally after 2 weeks of pulling my hair out