MJ hardware problems

Having issues with your magicJack? Post here, and we'll try to help you out!

Moderators: Bill Smith, Pilot

Post Reply
sureshot8
MagicJack Newbie
Posts: 2
Joined: Sun Jul 20, 2008 9:19 pm

MJ hardware problems

Post by sureshot8 »

I have had my MJ for 7 months now and other then yesterday's outage it usually works fine. But I am curious if others are having the same problems as I am. Here are some of the problems:

1. The short USB cord that came with the MJ stopped working

2. The MJ has connection issues with the usb port. I have to wiggle it to work and cannot move it while on the phone because the MJ can drop the connection to the usb very easily.

3. Echo on the line when on a different server during trips.

Thanks for any feedback
Tony
User avatar
teyong
MagicJack Contributor
Posts: 51
Joined: Wed May 14, 2008 10:00 am
Location: Savannah, GA. (pooler)

Re: MJ hardware problems

Post by teyong »

sureshot8 wrote:I have had my MJ for 7 months now and other then yesterday's outage it usually works fine. But I am curious if others are having the same problems as I am. Here are some of the problems:

1. The short USB cord that came with the MJ stopped working

2. The MJ has connection issues with the usb port. I have to wiggle it to work and cannot move it while on the phone because the MJ can drop the connection to the usb very easily.

3. Echo on the line when on a different server during trips.

Thanks for any feedback
Tony

Read my post "problem with USB and MJ"

found that my front two usb ports were as your is: loose fitting. I kept getting disk error in my event viewer under system every two minutes. I moved MJ to the back where the usb ports are tighter fitting then the front ones. So far no errors.
DAVID
Post Reply