How to get the SIP credintials from MJ, or is it impossable? If it can be done, please tell me how via PM. I have tried everything I can think of and searched this site and the internet for hours and days. I don't think it is even possible any more.
I also wanted to know if a linksys pap2 would work if I ever do get the SIP. It is brand new in the box. It does not say if it is a NA or V2. Under model # it just says PAP2.
can anybody help.
Thanks
Does anybody know
Moderators: Bill Smith, Pilot
-
crackerjack
- Dan Should Pay Me
- Posts: 784
- Joined: Fri Nov 16, 2007 9:32 pm
Re: Does anybody know
Sorry, folkspacken wrote:How to get the SIP credintials from MJ, or is it impossable? If it can be done, please tell me how via PM. I have tried everything I can think of and searched this site and the internet for hours and days. I don't think it is even possible any more.
I also wanted to know if a linksys pap2 would work if I ever do get the SIP. It is brand new in the box. It does not say if it is a NA or V2. Under model # it just says PAP2.
can anybody help.
Thanks
As of 1 SEPT, Magicjack has totally revamped their registration process, requiring information to be sent for verification that cannot be duplicated with an ATA. Enjoy it while you can!!!!!!!!!
Good Luck
CrackerJack
MagicJack Customer #73
MagicJack user since May 2007
MagicJack abuser since June 2007
"I gots mo' numbers than a Lotto machine!!!"
CrackerJack
MagicJack Customer #73
MagicJack user since May 2007
MagicJack abuser since June 2007
"I gots mo' numbers than a Lotto machine!!!"
Re: Does anybody know
Where did you get this information? I just received my PAP2T-NA yesterday and set it up, and haven't had any problems yet... Are you sure about this?crackerjack wrote:Sorry, folkspacken wrote:How to get the SIP credintials from MJ, or is it impossable? If it can be done, please tell me how via PM. I have tried everything I can think of and searched this site and the internet for hours and days. I don't think it is even possible any more.
I also wanted to know if a linksys pap2 would work if I ever do get the SIP. It is brand new in the box. It does not say if it is a NA or V2. Under model # it just says PAP2.
can anybody help.
Thanks
As of 1 SEPT, Magicjack has totally revamped their registration process, requiring information to be sent for verification that cannot be duplicated with an ATA. Enjoy it while you can!!!!!!!!!
-
norml jack
- Dan isn't smart enough to hire me
- Posts: 115
- Joined: Mon Jan 07, 2008 7:08 pm
- Location: Humboldt County, Ca.
- Contact:
Re: Does anybody know
Candy coated popcorn, peanuts, and a prize. Thats what you get with Crackerjack!crackerjack wrote: Sorry, folks
As of 1 SEPT, Magicjack has totally revamped their registration process, requiring information to be sent for verification that cannot be duplicated with an ATA. Enjoy it while you can!!!!!!!!!
WIN_55,212-2 My new best friend on the recreational playground. It's a gas!
OK, lets say if I ever get my SIP credintials, how do I get into my PAP2 to configure it? How do I know if its locked or not. It is brand new, still in the package. Under model it just says PAP2, there is no NA or V2, just PAP2. This is a linksys. I have done a lot of searching but still can't find out how to set this up. The user manual says to just hook it up and go, of course it is made for vonage.
Take it out of the box, plug it in following all instructions. Within minutes, your sip credentials will be installed onto you box and your Vonage account will activate assuming you provided a good credit card number.packen wrote:OK, lets say if I ever get my SIP credintials, how do I get into my PAP2 to configure it? How do I know if its locked or not. It is brand new, still in the package. Under model it just says PAP2, there is no NA or V2, just PAP2. This is a linksys. I have done a lot of searching but still can't find out how to set this up. The user manual says to just hook it up and go, of course it is made for vonage.
If you have read any of this thread, you would know that I am not talking about setting up a vonage account.dildog wrote:Take it out of the box, plug it in following all instructions. Within minutes, your sip credentials will be installed onto you box and your Vonage account will activate assuming you provided a good credit card number.packen wrote:OK, lets say if I ever get my SIP credintials, how do I get into my PAP2 to configure it? How do I know if its locked or not. It is brand new, still in the package. Under model it just says PAP2, there is no NA or V2, just PAP2. This is a linksys. I have done a lot of searching but still can't find out how to set this up. The user manual says to just hook it up and go, of course it is made for vonage.
Is there anybody that can actually answer my question? Also, how do I tell what firmware version is on it?
-
maine-iac
- Dan isn't smart enough to hire me
- Posts: 347
- Joined: Tue Mar 25, 2008 10:41 am
- Location: GA
If it is made for vonage, then it is locked for vonage and can only be used with vonage.packen wrote:OK, lets say if I ever get my SIP credintials, how do I get into my PAP2 to configure it? How do I know if its locked or not. It is brand new, still in the package. Under model it just says PAP2, there is no NA or V2, just PAP2. This is a linksys. I have done a lot of searching but still can't find out how to set this up. The user manual says to just hook it up and go, of course it is made for vonage.
Linksys Pap2 for vonage can be unlocked and used with any sip account.
http://www.bargainshare.com/index.php?showtopic=69607
Joe
Magicjack reseller
http://www.bargainshare.com/index.php?showtopic=69607
Joe
Magicjack reseller