magicjack account on old sunrocket gizmo?

[wfg97079]

I have seen a how-to somewhere on using my magicjack account info on an on sunrocket gizmo, does anyone have any info on this?

[laserjobs]

You need to find a way to get the magicJack SIP credentials before you can do anything

[norml jack]

I still haven't found a way to change the user-agent string on the Telco Labs SR-211 (I've invested almost five minutes to this endeavor), so if anyone has that info please share.

[teddy_b]

Is it the same as Telco AC-211-SR?
If so, do you know how to load config files into it via Web Interface?
If you do, just create a config file containing the following:

Code: Select all

; Configuration Parameters. Don't edit this line !!!
;
USER_AGENT="Whatever User-Agent You Want 2.1.3"
;

call it ipg_211.cfg (I believe the name must start from ipg_211), and load into AC-211.
That's the only way I know of to change the user-agent.

[norml jack]

Is it the same as Telco AC-211-SR?
If so, do you know how to load config files into it via Web Interface?
If you do, just create a config file containing the following:

Code: Select all

; Configuration Parameters. Don't edit this line !!!
;
USER_AGENT="Whatever User-Agent You Want 2.1.3"
;

call it ipg_211.cfg (I believe the name must start from ipg_211), and load into AC-211.
That's the only way I know of to change the user-agent.

Yes to all your questions and thank you very much. I never saw that in the admin guide, I must have overlooked it or it wasn't in there.(Probably overlooked, I'm a lazy reader.)

[kacklehorn]

This is what I did on my Gizmo MTA 6328-2Re (you'll need your SIP credentials):

1. Stick the network cable into the 'Lan Socket.
2. Get onto your PC and go to
http://192.168.251.1/Voice_adminPage.htm
username: admin
password: slapshot
3. Go to IP Network>Provisioning Settings, and uncheck
'Enable Provisioning'.
4. Click 'Save and Reboot'
5. Go back to Voice_adminPage.htm
6. Click on VOIP>Sip Proxy
7. Enter your proxy info in Sip Proxy
(i.e. proxy1.atlanta.talk4free.com:5070)
8. Check 'Use Outbound Proxy'
9. Set SIP Local Signaling Port to: 5060
10. Put in your SIP Domain
(i.e. 67.106.133.198)
11. Set Registration Expiration Time to: 60
12. Set Preferred Codecs list to:
PCMU/8000
PCMA/8000
G729A/8000
13. Click 'Save'
14. Click VOIP>User Account
15. Choose Line: 1
16: User ID: EXXXXXXXXXX01 <--Your SIP INFO
17. Password: XXXXXXXXXXXXXX <-- Your 14 digit Password
18. Confirm Password
19. User Name: Same as User ID
20. Authentication ID: Same as User ID
21. Use Hot Phone Number: No
22. Enable T38 Fax: Yes
23. Click Save.
24. Click IP Network>Interface Settings
25. Optional** Choose 'External Port'
26. Optional** Deselect Enable DHCP, and setup to your environment
27. Click Save and Reboot.
28. Pull the plug on the Gizmo
29. Stick the Network Cable into the WAN jack.
30. Plug it back in.
31. Plug your phone line into 'Phone 1'
32. Start Talking.