MagicJack on this Thin Client

corvax · Post by **corvax** » Thu Dec 11, 2008 6:08 pm

Hi what do you think about magicjack on this thin client COMPAQ EVO T20

davrow · Post by **davrow** » Thu Dec 11, 2008 6:18 pm

These max out at 256/256. Hard to get MJ to run in that cramped a space.

kumar · Post by **kumar** » Thu Dec 11, 2008 10:00 pm

Are you running XP LITE or normal....

256/256 what? ^

Kumar

corvax · Post by **corvax** » Fri Dec 12, 2008 8:18 am

is COMPAQ EVO T20 300MHZ 192MB/256MB WIN XPE THIN

What are the performance that i need?

davrow · Post by **davrow** » Fri Dec 12, 2008 3:19 pm

Kumar, Flash and Ram.

311334-xxx
DK406A
Processor . . . . . .300 MHz
Flash (ROM) . . . . 256 MB
Memory (SDRAM) 256 MB
Operating System Windows XP Embedded

http://h18000.www1.hp.com/products/quic ... 5_div.HTML

MagicMo · Post by **MagicMo** » Sat Dec 20, 2008 2:52 pm

corvax wrote:is COMPAQ EVO T20 300MHZ 192MB/256MB WIN XPE THIN

What are the performance that i need?

Your Compaq Evo T20 is made by Wyse. The equivalent Wyse model is the WT9235LE. I'm running MJ on a this unit with 256flash/384RAM.

If you open the unit up, you should find a socket for a SmartMedia flash upgrade. If the socketed device is a 64MB one, then you have 128MB soldered on the board. Replace this with a 128MB SmartMedia device for a total of 256MB. The maximum available size for a SmartMedia module is 128MB.

You should also find an open 144-pin SoDIMM socket. Install a 128MB or 256MB RAM module (PC-100/133) to increase your total RAM to 384 or 512 MB. Watch the height of the module here, as there is not a lot of clearance to the case.

You may need to go to the HP/Compaq or Wyse website and download a new image to flash your unit with, if the existing image does not work for you.

MagicMo

davrow · Post by **davrow** » Mon Dec 22, 2008 2:50 pm

Good info, MagicMo! Thanks for sharing that with us.

lovemj2 · Post by **lovemj2** » Wed Dec 24, 2008 11:25 am