QOS

magicJack Tips and Tricks

Moderators: Bill Smith, Pilot

Post Reply
User avatar
Sugarfoot
MagicJack Newbie
Posts: 9
Joined: Thu May 01, 2008 6:08 am
Location: Webberville, Texas

QOS

Post by Sugarfoot »

I'm trying to set the QOS on my Lynksys WRT54GS router. It asks for upstream bandwidth and the MAC address. Where do I find these?
az2008
MagicJack Sensei
Posts: 1404
Joined: Wed Aug 20, 2008 12:57 pm
Location: Tempe, AZ

Re: QOS

Post by az2008 »

Sugarfoot wrote:I'm trying to set the QOS on my Lynksys WRT54GS router. It asks for upstream bandwidth and the MAC address. Where do I find these?
You can determine your bandwidth by running a few tests at speedtest.net.

The MAC address of the computer running MJ can be found by opening a DOS (cmd) window, and typing "ipconfig /all". It will display something called the Physical Address.

However, I don't believe the limited QoS features of Linksys's firmware will help you much. It will only give priority to the machine MJ is running on (deprioritizing other machines). But, it will give priority to *all* traffic coming from that machine. If it's not a standalone, always-on MJ server, it won't help much. You'll need to run one of the software QoS tools too (mentioned on the wiki how-to for QoS).

Mark
See the MagicJack Wiki (FAQ, How-To, history and more).
User avatar
Sugarfoot
MagicJack Newbie
Posts: 9
Joined: Thu May 01, 2008 6:08 am
Location: Webberville, Texas

QOS

Post by Sugarfoot »

Appreciate the reply. Looks like I need to return this router and buy one capable of running Tomato or some other firmware. Your reply cleared up a lot of unknowns for me. Again, Thanks
az2008
MagicJack Sensei
Posts: 1404
Joined: Wed Aug 20, 2008 12:57 pm
Location: Tempe, AZ

Re: QOS

Post by az2008 »

Sugarfoot wrote:Looks like I need to return this router and buy one capable of running Tomato or some other firmware.
DD-WRT supports the GS v6. (http://www.dd-wrt.com/dd-wrtv3/dd-wrt/hardware.html). You said in another thread that's what you have. And, as I said, I don't particularly care for DD-WRT. I thought it was more difficult to install. Seemed to have more risk of "bricking" the router (based on all the pages on the DD-WRT site describing how to unbrick). Its Layer 7 RTP filter probably doesn't work. And, there have been a lot of reports that its QoS isn't very effective (which matches my own experience, although it could have been because the L7 filter was broken).

But, it supports a lot of routers. Tomato is falling behind in this regard.

As I said in the other thread, the GL is a good router for Tomato. You can also use the ND (new driver) firmware which speeds up the wireless. (You have to test the corerev if it's 7 or above. All recent GLs seem to be 9. Ask on the Tomato forum for more info.).

Someone said they like the ASUS WL-520GU for Tomato. It's supposed to be very fast even with QoS enabled (39-40mbs).

Mark
See the MagicJack Wiki (FAQ, How-To, history and more).
User avatar
Sugarfoot
MagicJack Newbie
Posts: 9
Joined: Thu May 01, 2008 6:08 am
Location: Webberville, Texas

New Router

Post by Sugarfoot »

Returned the WRT54GS, and bought a WRT54GL. Just upgraded to Tomato firmware. In the middle of settings now. Will update after I finish.
Post Reply