new pap2 user no dial tone
Moderators: Bill Smith, Pilot
new pap2 user no dial tone
put all my data per feed with pap2 configuartion extracted sip info with strohs try and pick up phone its dead can't make a phone call, any help for a newbie would be appreciated
this is what comes up
Firmware Version: 3.1.22(LS)
Voice Phone Adapter with 2 Ports for Voice-Over-IP
PAP2
InfoSystemSIPProvisioningRegionalLine 1Line 2User 1User 2
Advanced View (switch to basic view) User Login
System Information
DHCP: Enabled Current IP: 192.168.1.41
Host Name: LinksysPAP Domain: open dns
Current Netmask: 255.255.255.0 Current Gateway: 192.168.1.1
Primary DNS: 192.168.1.1
Secondary DNS:
Product Information
Product Name: PAP2-NA Serial Number: FH900EB42477
Software Version: 3.1.22(LS) Hardware Version: 0.03.4
MAC Address: 000F9A1A00D8 Client Certificate: Installed
Customization: Open
System Status
Current Time: 6/6/2009 14:32:05 Elapsed Time: 00:19:26
Broadcast Pkts Sent: 0 Broadcast Bytes Sent: 0
Broadcast Pkts Recv: 60 Broadcast Bytes Recv: 6719
Broadcast Pkts Dropped: 0 Broadcast Bytes Dropped: 0
RTP Packets Sent: 0 RTP Bytes Sent: 0
RTP Packets Recv: 0 RTP Bytes Recv: 0
SIP Messages Sent: 1 SIP Bytes Sent: 581
SIP Messages Recv: 0 SIP Bytes Recv: 0
External IP:
Line 1 Status
Display Name: Exxxxxxxxxx01 User ID: Exxxxxxxxxx01
Hook State: On Registration State: Can't connect to login server
Last Registration At: 0/0/0 00:00:00 Next Registration In: 6 s
Message Waiting: No Call Back Active: No
Last Called Number: Last Caller Number:
Mapped SIP Port:
Call 1 State: Idle Call 2 State: Idle
Call 1 Tone: None Call 2 Tone: None
Call 1 Encoder: Call 2 Encoder:
Call 1 Decoder: Call 2 Decoder:
Call 1 FAX: Call 2 FAX:
Call 1 Type: Call 2 Type:
Call 1 Remote Hold: Call 2 Remote Hold:
Call 1 Callback: Call 2 Callback:
Call 1 Peer Name: Call 2 Peer Name:
Call 1 Peer Phone: Call 2 Peer Phone:
Call 1 Duration: Call 2 Duration:
Call 1 Packets Sent: Call 2 Packets Sent:
Call 1 Packets Recv: Call 2 Packets Recv:
Call 1 Bytes Sent: Call 2 Bytes Sent:
Call 1 Bytes Recv: Call 2 Bytes Recv:
Call 1 Decode Latency: Call 2 Decode Latency:
Call 1 Jitter: Call 2 Jitter:
Call 1 Round Trip Delay: Call 2 Round Trip Delay:
Call 1 Packets Lost: Call 2 Packets Lost:
Call 1 Packet Error: Call 2 Packet Error:
Call 1 Mapped RTP Port: Call 2 Mapped RTP Port:
Line 2 Status
Display Name: User ID:
Hook State: On Registration State: Offline
Last Registration At: Next Registration In:
Message Waiting: No Call Back Active: No
Last Called Number: Last Caller Number:
Mapped SIP Port:
Call 1 State: Idle Call 2 State: Idle
Call 1 Tone: None Call 2 Tone: None
Call 1 Type: Call 2 Type:
Call 1 Encoder: Call 2 Encoder:
Call 1 Decoder: Call 2 Decoder:
Call 1 FAX: Call 2 FAX:
Call 1 Remote Hold: Call 2 Remote Hold:
Call 1 Callback: Call 2 Callback:
Call 1 Peer Name: Call 2 Peer Name:
Call 1 Peer Phone: Call 2 Peer Phone:
Call 1 Duration: Call 2 Duration:
Call 1 Packets Sent: Call 2 Packets Sent:
Call 1 Packets Recv: Call 2 Packets Recv:
Call 1 Bytes Sent: Call 2 Bytes Sent:
Call 1 Bytes Recv: Call 2 Bytes Recv:
Call 1 Decode Latency: Call 2 Decode Latency:
Call 1 Jitter: Call 2 Jitter:
Call 1 Round Trip Delay: Call 2 Round Trip Delay:
Call 1 Packets Lost: Call 2 Packets Lost:
Call 1 Packet Error: Call 2 Packet Error:
Call 1 Mapped RTP Port: Call 2 Mapped RTP Port:
System Configuration
Restricted Access Domains:
Enable Web Server: yesno Web Server Port:
Enable Web Admin Access: yesno Admin Passwd:
User Password:
Internet Connection Type
DHCP: yesno
Static IP: NetMask:
Gateway:
Optional Network Configuration
HostName: Domain:
Primary DNS: Secondary DNS:
DNS Server Order: ManualManual,DHCPDHCP,Manual DNS Query Mode: ParallelSequential
Syslog Server: Debug Server:
Debug Level: 01230+H1+H2+H3+H99 Primary NTP Server:
Secondary NTP Server:
SIP Parameters
Max Forward: Max Redirection:
Max Auth: SIP User Agent Name:
SIP Server Name: SIP Reg User Agent Name:
SIP Accept Language: DTMF Relay MIME Type:
Hook Flash MIME Type: Remove Last Reg: yesno
Use Compact Header: yesno Escape Display Name: yesno
RFC 2543 Call Hold: yesno Mark All AVT Packets: yesno
SIP Timer Values (sec)
SIP T1: SIP T2:
SIP T4: SIP Timer B:
SIP Timer F: SIP Timer H:
SIP Timer D: SIP Timer J:
INVITE Expires: ReINVITE Expires:
Reg Min Expires: Reg Max Expires:
Reg Retry Intvl: Reg Retry Long Intvl:
Reg Retry Random Delay: Reg Retry Long Random Delay:
Reg Retry Intvl Cap:
Response Status Code Handling
SIT1 RSC: SIT2 RSC:
SIT3 RSC: SIT4 RSC:
Try Backup RSC: Retry Reg RSC:
RTP Parameters
RTP Port Min: RTP Port Max:
RTP Packet Size: Max RTP ICMP Err:
RTCP Tx Interval: No UDP Checksum: yesno
Stats In BYE: yesno
SDP Payload Types
NSE Dynamic Payload: AVT Dynamic Payload:
INFOREQ Dynamic Payload: G726r16 Dynamic Payload:
G726r24 Dynamic Payload: G726r32 Dynamic Payload:
G726r40 Dynamic Payload: G729b Dynamic Payload:
NSE Codec Name: AVT Codec Name:
G711u Codec Name: G711a Codec Name:
G726r16 Codec Name: G726r24 Codec Name:
G726r32 Codec Name: G726r40 Codec Name:
G729a Codec Name: G729b Codec Name:
G723 Codec Name:
NAT Support Parameters
Handle VIA received: yesno Handle VIA rport: yesno
Insert VIA received: yesno Insert VIA rport: yesno
Substitute VIA Addr: yesno Send Resp To Src Port: yesno
STUN Enable: yesno STUN Test Enable: yesno
STUN Server: EXT IP:
EXT RTP Port Min: NAT Keep Alive Intvl:
Configuration Profile
Provision Enable: yesno Resync On Reset: yesno
Resync Random Delay: Resync Periodic:
Resync Error Retry Delay: Forced Resync Delay:
Resync From SIP: yesno Resync After Upgrade Attempt: yesno
Resync Trigger 1:
Resync Trigger 2:
Resync Fails On FNF: yesno
Profile Rule:
Profile Rule B:
Profile Rule C:
Profile Rule D:
Log Resync Request Msg:
Log Resync Success Msg:
Log Resync Failure Msg:
Report Rule:
Firmware Upgrade
Upgrade Enable: yesno Upgrade Error Retry Delay:
Downgrade Rev Limit:
Upgrade Rule:
Log Upgrade Request Msg:
Log Upgrade Success Msg:
Log Upgrade Failure Msg:
General Purpose Parameters
GPP A:
GPP B:
GPP C:
GPP D:
GPP E:
GPP F:
GPP G:
GPP H:
GPP I:
GPP J:
GPP K:
GPP L:
GPP M:
GPP N:
GPP O:
GPP P:
Call Progress Tones
Dial Tone:
Second Dial Tone:
Outside Dial Tone:
Prompt Tone:
Busy Tone:
Reorder Tone:
Off Hook Warning Tone:
Ring Back Tone:
Confirm Tone:
SIT1 Tone:
SIT2 Tone:
SIT3 Tone:
SIT4 Tone:
MWI Dial Tone:
Cfwd Dial Tone:
DND Dial Tone:
Holding Tone:
Conference Tone:
Secure Call Indication Tone:
Feature Invocation Tone:
Distinctive Ring Patterns
Ring1 Cadence: Ring2 Cadence:
Ring3 Cadence: Ring4 Cadence:
Ring5 Cadence: Ring6 Cadence:
Ring7 Cadence: Ring8 Cadence:
Distinctive Call Waiting Tone Patterns
CWT1 Cadence: CWT2 Cadence:
CWT3 Cadence: CWT4 Cadence:
CWT5 Cadence: CWT6 Cadence:
CWT7 Cadence: CWT8 Cadence:
Distinctive Ring/CWT Pattern Names
Ring1 Name: Ring2 Name:
Ring3 Name: Ring4 Name:
Ring5 Name: Ring6 Name:
Ring7 Name: Ring8 Name:
Ring and Call Waiting Tone Spec
Ring Waveform: SinusoidTrapezoid Ring Frequency:
Ring Voltage: CWT Frequency:
Synchronized Ring: yesno
Control Timer Values (sec)
Hook Flash Timer Min: Hook Flash Timer Max:
Callee On Hook Delay: Reorder Delay:
Call Back Expires: Call Back Retry Intvl:
Call Back Delay: VMWI Refresh Intvl:
Interdigit Long Timer: Interdigit Short Timer:
CPC Delay: CPC Duration:
Vertical Service Activation Codes
Call Return Code: Blind Transfer Code:
Call Back Act Code: Call Back Deact Code:
Cfwd All Act Code: Cfwd All Deact Code:
Cfwd Busy Act Code: Cfwd Busy Deact Code:
Cfwd No Ans Act Code: Cfwd No Ans Deact Code:
Cfwd Last Act Code: Cfwd Last Deact Code:
Block Last Act Code: Block Last Deact Code:
Accept Last Act Code: Accept Last Deact Code:
CW Act Code: CW Deact Code:
CW Per Call Act Code: CW Per Call Deact Code:
Block CID Act Code: Block CID Deact Code:
Block CID Per Call Act Code: Block CID Per Call Deact Code:
Block ANC Act Code: Block ANC Deact Code:
DND Act Code: DND Deact Code:
CID Act Code: CID Deact Code:
CWCID Act Code: CWCID Deact Code:
Dist Ring Act Code: Dist Ring Deact Code:
Speed Dial Act Code: Secure All Call Act Code:
Secure No Call Act Code: Secure One Call Act Code:
Secure One Call Deact Code: Conference Act Code:
Attn-Xfer Act Code: Modem Line Toggle Code:
Referral Services Codes:
Feature Dial Services Codes:
Vertical Service Announcement Codes
Service Annc Base Number:
Service Annc Extension Codes:
Outbound Call Codec Selection Codes
Prefer G711u Code: Force G711u Code:
Prefer G711a Code: Force G711a Code:
Prefer G723 Code: Force G723 Code:
Prefer G726r16 Code: Force G726r16 Code:
Prefer G726r24 Code: Force G726r24 Code:
Prefer G726r32 Code: Force G726r32 Code:
Prefer G726r40 Code: Force G726r40 Code:
Prefer G729a Code: Force G729a Code:
Miscellaneous
Set Local Date (mm/dd): Set Local Time (HH/mm):
Time Zone: GMT-12:00GMT-11:00GMT-10:00GMT-09:00GMT-08:00GMT-07:00GMT-06:00GMT-05:00GMT-04:00GMT-03:30GMT-03:00GMT-02:00GMT-01:00GMTGMT+01:00GMT+02:00GMT+03:00GMT+03:30GMT+04:00GMT+05:00GMT+05:30GMT+05:45GMT+06:00GMT+06:30GMT+07:00GMT+08:00GMT+09:00GMT+09:30GMT+10:00GMT+11:00GMT+12:00GMT+13:00 FXS Port Impedance: 600900600+2.16uF900+2.16uF270+750||150nF220+820||120nF220+820||115nF370+620||310nF
Daylight Saving Time Rule:
FXS Port Input Gain: FXS Port Output Gain:
DTMF Playback Level: DTMF Playback Length:
Detect ABCD: yesno Playback ABCD: yesno
Caller ID Method: Bellcore(N.Amer,China)DTMF(Finland,Sweden)DTMF(Denmark)ETSI DTMFETSI DTMF With PRETSI DTMF After RingETSI FSKETSI FSK With PR(UK)DTMF(Denmark) With PR FXS Port Power Limit: 12345678
Caller ID FSK Standard: bell 202v.23 Feature Invocation Method: DefaultSweden
More Echo Suppression: yesno
Line Enable: yesno
Streaming Audio Server (SAS)
SAS Enable: yesno SAS DLG Refresh Intvl:
SAS Inbound RTP Sink:
NAT Settings
NAT Mapping Enable: yesno NAT Keep Alive Enable: yesno
NAT Keep Alive Msg: NAT Keep Alive Dest:
Network Settings
SIP TOS/DiffServ Value: Network Jitter Level: lowmediumhighvery highextremely high
RTP TOS/DiffServ Value: Jitter Buffer Adjustment: up and downup onlydown onlydisable
SIP Settings
SIP Port: SIP 100REL Enable: yesno
EXT SIP Port: Auth Resync-Reboot: yesno
Auth INVITE: yesno Auth MWI: yesno
SIP Proxy-Require: SIP Remote-Party-ID: yesno
SIP GUID: yesno SIP Debug Option: none1-line1-line excl. OPT1-line excl. NTFY1-line excl. REG1-line excl. OPT|NTFY|REGfullfull excl. OPTfull excl. NTFYfull excl. REGfull excl. OPT|NTFY|REG
RTP Log Intvl: Restrict Source IP: yesno
Referor Bye Delay: Refer Target Bye Delay:
Referee Bye Delay: Refer-To Target Contact: yesno
Sticky 183: yesno
Call Feature Settings
Blind Attn-Xfer Enable: yesno MOH Server:
Xfer When Hangup Conf: yesno Conference Bridge URL:
Conference Bridge Ports: 345678910
Proxy and Registration
Proxy: Use Outbound Proxy: yesno
Outbound Proxy: Use OB Proxy In Dialog: yesno
Register: yesno Make Call Without Reg: yesno
Register Expires: Ans Call Without Reg: yesno
Use DNS SRV: yesno DNS SRV Auto Prefix: yesno
Proxy Fallback Intvl: Proxy Redundancy Method: NormalBased on SRV Port
Voice Mail Server: Mailbox Subscribe Expires:
Subscriber Information
Display Name: User ID:
Password: Use Auth ID: yesno
Auth ID:
Mini Certificate:
SRTP Private Key:
Supplementary Service Subscription
Call Waiting Serv: yesno Block CID Serv: yesno
Block ANC Serv: yesno Dist Ring Serv: yesno
Cfwd All Serv: yesno Cfwd Busy Serv: yesno
Cfwd No Ans Serv: yesno Cfwd Sel Serv: yesno
Cfwd Last Serv: yesno Block Last Serv: yesno
Accept Last Serv: yesno DND Serv: yesno
CID Serv: yesno CWCID Serv: yesno
Call Return Serv: yesno Call Back Serv: yesno
Three Way Call Serv: yesno Three Way Conf Serv: yesno
Attn Transfer Serv: yesno Unattn Transfer Serv: yesno
MWI Serv: yesno VMWI Serv: yesno
Speed Dial Serv: yesno Secure Call Serv: yesno
Referral Serv: yesno Feature Dial Serv: yesno
Service Announcement Serv: yesno
Audio Configuration
Preferred Codec: G711uG711aG726-16G726-24G726-32G726-40G729aG723 Silence Supp Enable: yesno
Use Pref Codec Only: yesno Silence Threshold: highmediumlow
G729a Enable: yesno Echo Canc Enable: yesno
G723 Enable: yesno Echo Canc Adapt Enable: yesno
G726-16 Enable: yesno Echo Supp Enable: yesno
G726-24 Enable: yesno FAX CED Detect Enable: yesno
G726-32 Enable: yesno FAX CNG Detect Enable: yesno
G726-40 Enable: yesno FAX Passthru Codec: G711uG711a
DTMF Process INFO: yesno FAX Codec Symmetric: yesno
DTMF Process AVT: yesno FAX Passthru Method: NoneNSEReINVITE
DTMF Tx Method: InBandAVTINFOAuto DTMF Tx Mode: NormalStrict
FAX Process NSE: yesno Hook Flash Tx Method: NoneAVTINFO
FAX Disable ECAN: yesno Release Unused Codec: yesno
Dial Plan
Dial Plan:
Enable IP Dialing: yesno Emergency Number:
FXS Port Polarity Configuration
Idle Polarity: ForwardReverse Caller Conn Polarity: ForwardReverse
Callee Conn Polarity: ForwardReverse
Line Enable: yesno
Streaming Audio Server (SAS)
SAS Enable: yesno SAS DLG Refresh Intvl:
SAS Inbound RTP Sink:
NAT Settings
NAT Mapping Enable: yesno NAT Keep Alive Enable: yesno
NAT Keep Alive Msg: NAT Keep Alive Dest:
Network Settings
SIP TOS/DiffServ Value: Network Jitter Level: lowmediumhighvery highextremely high
RTP TOS/DiffServ Value: Jitter Buffer Adjustment: up and downup onlydown onlydisable
SIP Settings
SIP Port: SIP 100REL Enable: yesno
EXT SIP Port: Auth Resync-Reboot: yesno
Auth INVITE: yesno Auth MWI: yesno
SIP Proxy-Require: SIP Remote-Party-ID: yesno
SIP GUID: yesno SIP Debug Option: none1-line1-line excl. OPT1-line excl. NTFY1-line excl. REG1-line excl. OPT|NTFY|REGfullfull excl. OPTfull excl. NTFYfull excl. REGfull excl. OPT|NTFY|REG
RTP Log Intvl: Restrict Source IP: yesno
Referor Bye Delay: Refer Target Bye Delay:
Referee Bye Delay: Refer-To Target Contact: yesno
Sticky 183: yesno
Call Feature Settings
Blind Attn-Xfer Enable: yesno MOH Server:
Xfer When Hangup Conf: yesno Conference Bridge URL:
Conference Bridge Ports: 345678910
Proxy and Registration
Proxy: Use Outbound Proxy: yesno
Outbound Proxy: Use OB Proxy In Dialog: yesno
Register: yesno Make Call Without Reg: yesno
Register Expires: Ans Call Without Reg: yesno
Use DNS SRV: yesno DNS SRV Auto Prefix: yesno
Proxy Fallback Intvl: Proxy Redundancy Method: NormalBased on SRV Port
Voice Mail Server: Mailbox Subscribe Expires:
Subscriber Information
Display Name: User ID:
Password: Use Auth ID: yesno
Auth ID:
Mini Certificate:
SRTP Private Key:
Supplementary Service Subscription
Call Waiting Serv: yesno Block CID Serv: yesno
Block ANC Serv: yesno Dist Ring Serv: yesno
Cfwd All Serv: yesno Cfwd Busy Serv: yesno
Cfwd No Ans Serv: yesno Cfwd Sel Serv: yesno
Cfwd Last Serv: yesno Block Last Serv: yesno
Accept Last Serv: yesno DND Serv: yesno
CID Serv: yesno CWCID Serv: yesno
Call Return Serv: yesno Call Back Serv: yesno
Three Way Call Serv: yesno Three Way Conf Serv: yesno
Attn Transfer Serv: yesno Unattn Transfer Serv: yesno
MWI Serv: yesno VMWI Serv: yesno
Speed Dial Serv: yesno Secure Call Serv: yesno
Referral Serv: yesno Feature Dial Serv: yesno
Service Announcement Serv: yesno
Audio Configuration
Preferred Codec: G711uG711aG726-16G726-24G726-32G726-40G729aG723 Silence Supp Enable: yesno
Use Pref Codec Only: yesno Silence Threshold: highmediumlow
G729a Enable: yesno Echo Canc Enable: yesno
G723 Enable: yesno Echo Canc Adapt Enable: yesno
G726-16 Enable: yesno Echo Supp Enable: yesno
G726-24 Enable: yesno FAX CED Detect Enable: yesno
G726-32 Enable: yesno FAX CNG Detect Enable: yesno
G726-40 Enable: yesno FAX Passthru Codec: G711uG711a
DTMF Process INFO: yesno FAX Codec Symmetric: yesno
DTMF Process AVT: yesno FAX Passthru Method: NoneNSEReINVITE
DTMF Tx Method: InBandAVTINFOAuto DTMF Tx Mode: NormalStrict
FAX Process NSE: yesno Hook Flash Tx Method: NoneAVTINFO
FAX Disable ECAN: yesno Release Unused Codec: yesno
Dial Plan
Dial Plan:
Enable IP Dialing: yesno Emergency Number:
FXS Port Polarity Configuration
Idle Polarity: ForwardReverse Caller Conn Polarity: ForwardReverse
Callee Conn Polarity: ForwardReverse
Call Forward Settings
Cfwd All Dest: Cfwd Busy Dest:
Cfwd No Ans Dest: Cfwd No Ans Delay:
Selective Call Forward Settings
Cfwd Sel1 Caller: Cfwd Sel1 Dest:
Cfwd Sel2 Caller: Cfwd Sel2 Dest:
Cfwd Sel3 Caller: Cfwd Sel3 Dest:
Cfwd Sel4 Caller: Cfwd Sel4 Dest:
Cfwd Sel5 Caller: Cfwd Sel5 Dest:
Cfwd Sel6 Caller: Cfwd Sel6 Dest:
Cfwd Sel7 Caller: Cfwd Sel7 Dest:
Cfwd Sel8 Caller: Cfwd Sel8 Dest:
Cfwd Last Caller: Cfwd Last Dest:
Block Last Caller: Accept Last Caller:
Speed Dial Settings
Speed Dial 2: Speed Dial 3:
Speed Dial 4: Speed Dial 5:
Speed Dial 6: Speed Dial 7:
Speed Dial 8: Speed Dial 9:
Supplementary Service Settings
CW Setting: yesno Block CID Setting: yesno
Block ANC Setting: yesno DND Setting: yesno
CID Setting: yesno CWCID Setting: yesno
Dist Ring Setting: yesno Secure Call Setting: yesno
Message Waiting: yesno DND Activated: yesno
Distinctive Ring Settings
Ring1 Caller: Ring2 Caller:
Ring3 Caller: Ring4 Caller:
Ring5 Caller: Ring6 Caller:
Ring7 Caller: Ring8 Caller:
Ring Settings
Default Ring: 12345678 Default CWT: 12345678
Hold Reminder Ring: 12345678none Call Back Ring: 12345678
Cfwd Ring Splash Len: Cblk Ring Splash Len:
VMWI Ring Splash Len:
VMWI Ring Policy: New VM AvailableNew VM Becomes AvailableNew VM Arrives
Ring On No New VM: yesno
Call Forward Settings
Cfwd All Dest: Cfwd Busy Dest:
Cfwd No Ans Dest: Cfwd No Ans Delay:
Selective Call Forward Settings
Cfwd Sel1 Caller: Cfwd Sel1 Dest:
Cfwd Sel2 Caller: Cfwd Sel2 Dest:
Cfwd Sel3 Caller: Cfwd Sel3 Dest:
Cfwd Sel4 Caller: Cfwd Sel4 Dest:
Cfwd Sel5 Caller: Cfwd Sel5 Dest:
Cfwd Sel6 Caller: Cfwd Sel6 Dest:
Cfwd Sel7 Caller: Cfwd Sel7 Dest:
Cfwd Sel8 Caller: Cfwd Sel8 Dest:
Cfwd Last Caller: Cfwd Last Dest:
Block Last Caller: Accept Last Caller:
Speed Dial Settings
Speed Dial 2: Speed Dial 3:
Speed Dial 4: Speed Dial 5:
Speed Dial 6: Speed Dial 7:
Speed Dial 8: Speed Dial 9:
Supplementary Service Settings
CW Setting: yesno Block CID Setting: yesno
Block ANC Setting: yesno DND Setting: yesno
CID Setting: yesno CWCID Setting: yesno
Dist Ring Setting: yesno Secure Call Setting: yesno
Message Waiting: yesno DND Activated: yesno
Distinctive Ring Settings
Ring1 Caller: Ring2 Caller:
Ring3 Caller: Ring4 Caller:
Ring5 Caller: Ring6 Caller:
Ring7 Caller: Ring8 Caller:
Ring Settings
Default Ring: 12345678 Default CWT: 12345678
Hold Reminder Ring: 12345678none Call Back Ring: 12345678
Cfwd Ring Splash Len: Cblk Ring Splash Len:
VMWI Ring Splash Len:
VMWI Ring Policy: New VM AvailableNew VM Becomes AvailableNew VM Arrives
Ring On No New VM: yesno
Voice Phone Adapter with 2 Ports for Voice-Over-IP
PAP2
InfoSystemSIPProvisioningRegionalLine 1Line 2User 1User 2
Advanced View (switch to basic view) User Login
System Information
DHCP: Enabled Current IP: 192.168.1.41
Host Name: LinksysPAP Domain: open dns
Current Netmask: 255.255.255.0 Current Gateway: 192.168.1.1
Primary DNS: 192.168.1.1
Secondary DNS:
Product Information
Product Name: PAP2-NA Serial Number: FH900EB42477
Software Version: 3.1.22(LS) Hardware Version: 0.03.4
MAC Address: 000F9A1A00D8 Client Certificate: Installed
Customization: Open
System Status
Current Time: 6/6/2009 14:32:05 Elapsed Time: 00:19:26
Broadcast Pkts Sent: 0 Broadcast Bytes Sent: 0
Broadcast Pkts Recv: 60 Broadcast Bytes Recv: 6719
Broadcast Pkts Dropped: 0 Broadcast Bytes Dropped: 0
RTP Packets Sent: 0 RTP Bytes Sent: 0
RTP Packets Recv: 0 RTP Bytes Recv: 0
SIP Messages Sent: 1 SIP Bytes Sent: 581
SIP Messages Recv: 0 SIP Bytes Recv: 0
External IP:
Line 1 Status
Display Name: Exxxxxxxxxx01 User ID: Exxxxxxxxxx01
Hook State: On Registration State: Can't connect to login server
Last Registration At: 0/0/0 00:00:00 Next Registration In: 6 s
Message Waiting: No Call Back Active: No
Last Called Number: Last Caller Number:
Mapped SIP Port:
Call 1 State: Idle Call 2 State: Idle
Call 1 Tone: None Call 2 Tone: None
Call 1 Encoder: Call 2 Encoder:
Call 1 Decoder: Call 2 Decoder:
Call 1 FAX: Call 2 FAX:
Call 1 Type: Call 2 Type:
Call 1 Remote Hold: Call 2 Remote Hold:
Call 1 Callback: Call 2 Callback:
Call 1 Peer Name: Call 2 Peer Name:
Call 1 Peer Phone: Call 2 Peer Phone:
Call 1 Duration: Call 2 Duration:
Call 1 Packets Sent: Call 2 Packets Sent:
Call 1 Packets Recv: Call 2 Packets Recv:
Call 1 Bytes Sent: Call 2 Bytes Sent:
Call 1 Bytes Recv: Call 2 Bytes Recv:
Call 1 Decode Latency: Call 2 Decode Latency:
Call 1 Jitter: Call 2 Jitter:
Call 1 Round Trip Delay: Call 2 Round Trip Delay:
Call 1 Packets Lost: Call 2 Packets Lost:
Call 1 Packet Error: Call 2 Packet Error:
Call 1 Mapped RTP Port: Call 2 Mapped RTP Port:
Line 2 Status
Display Name: User ID:
Hook State: On Registration State: Offline
Last Registration At: Next Registration In:
Message Waiting: No Call Back Active: No
Last Called Number: Last Caller Number:
Mapped SIP Port:
Call 1 State: Idle Call 2 State: Idle
Call 1 Tone: None Call 2 Tone: None
Call 1 Type: Call 2 Type:
Call 1 Encoder: Call 2 Encoder:
Call 1 Decoder: Call 2 Decoder:
Call 1 FAX: Call 2 FAX:
Call 1 Remote Hold: Call 2 Remote Hold:
Call 1 Callback: Call 2 Callback:
Call 1 Peer Name: Call 2 Peer Name:
Call 1 Peer Phone: Call 2 Peer Phone:
Call 1 Duration: Call 2 Duration:
Call 1 Packets Sent: Call 2 Packets Sent:
Call 1 Packets Recv: Call 2 Packets Recv:
Call 1 Bytes Sent: Call 2 Bytes Sent:
Call 1 Bytes Recv: Call 2 Bytes Recv:
Call 1 Decode Latency: Call 2 Decode Latency:
Call 1 Jitter: Call 2 Jitter:
Call 1 Round Trip Delay: Call 2 Round Trip Delay:
Call 1 Packets Lost: Call 2 Packets Lost:
Call 1 Packet Error: Call 2 Packet Error:
Call 1 Mapped RTP Port: Call 2 Mapped RTP Port:
System Configuration
Restricted Access Domains:
Enable Web Server: yesno Web Server Port:
Enable Web Admin Access: yesno Admin Passwd:
User Password:
Internet Connection Type
DHCP: yesno
Static IP: NetMask:
Gateway:
Optional Network Configuration
HostName: Domain:
Primary DNS: Secondary DNS:
DNS Server Order: ManualManual,DHCPDHCP,Manual DNS Query Mode: ParallelSequential
Syslog Server: Debug Server:
Debug Level: 01230+H1+H2+H3+H99 Primary NTP Server:
Secondary NTP Server:
SIP Parameters
Max Forward: Max Redirection:
Max Auth: SIP User Agent Name:
SIP Server Name: SIP Reg User Agent Name:
SIP Accept Language: DTMF Relay MIME Type:
Hook Flash MIME Type: Remove Last Reg: yesno
Use Compact Header: yesno Escape Display Name: yesno
RFC 2543 Call Hold: yesno Mark All AVT Packets: yesno
SIP Timer Values (sec)
SIP T1: SIP T2:
SIP T4: SIP Timer B:
SIP Timer F: SIP Timer H:
SIP Timer D: SIP Timer J:
INVITE Expires: ReINVITE Expires:
Reg Min Expires: Reg Max Expires:
Reg Retry Intvl: Reg Retry Long Intvl:
Reg Retry Random Delay: Reg Retry Long Random Delay:
Reg Retry Intvl Cap:
Response Status Code Handling
SIT1 RSC: SIT2 RSC:
SIT3 RSC: SIT4 RSC:
Try Backup RSC: Retry Reg RSC:
RTP Parameters
RTP Port Min: RTP Port Max:
RTP Packet Size: Max RTP ICMP Err:
RTCP Tx Interval: No UDP Checksum: yesno
Stats In BYE: yesno
SDP Payload Types
NSE Dynamic Payload: AVT Dynamic Payload:
INFOREQ Dynamic Payload: G726r16 Dynamic Payload:
G726r24 Dynamic Payload: G726r32 Dynamic Payload:
G726r40 Dynamic Payload: G729b Dynamic Payload:
NSE Codec Name: AVT Codec Name:
G711u Codec Name: G711a Codec Name:
G726r16 Codec Name: G726r24 Codec Name:
G726r32 Codec Name: G726r40 Codec Name:
G729a Codec Name: G729b Codec Name:
G723 Codec Name:
NAT Support Parameters
Handle VIA received: yesno Handle VIA rport: yesno
Insert VIA received: yesno Insert VIA rport: yesno
Substitute VIA Addr: yesno Send Resp To Src Port: yesno
STUN Enable: yesno STUN Test Enable: yesno
STUN Server: EXT IP:
EXT RTP Port Min: NAT Keep Alive Intvl:
Configuration Profile
Provision Enable: yesno Resync On Reset: yesno
Resync Random Delay: Resync Periodic:
Resync Error Retry Delay: Forced Resync Delay:
Resync From SIP: yesno Resync After Upgrade Attempt: yesno
Resync Trigger 1:
Resync Trigger 2:
Resync Fails On FNF: yesno
Profile Rule:
Profile Rule B:
Profile Rule C:
Profile Rule D:
Log Resync Request Msg:
Log Resync Success Msg:
Log Resync Failure Msg:
Report Rule:
Firmware Upgrade
Upgrade Enable: yesno Upgrade Error Retry Delay:
Downgrade Rev Limit:
Upgrade Rule:
Log Upgrade Request Msg:
Log Upgrade Success Msg:
Log Upgrade Failure Msg:
General Purpose Parameters
GPP A:
GPP B:
GPP C:
GPP D:
GPP E:
GPP F:
GPP G:
GPP H:
GPP I:
GPP J:
GPP K:
GPP L:
GPP M:
GPP N:
GPP O:
GPP P:
Call Progress Tones
Dial Tone:
Second Dial Tone:
Outside Dial Tone:
Prompt Tone:
Busy Tone:
Reorder Tone:
Off Hook Warning Tone:
Ring Back Tone:
Confirm Tone:
SIT1 Tone:
SIT2 Tone:
SIT3 Tone:
SIT4 Tone:
MWI Dial Tone:
Cfwd Dial Tone:
DND Dial Tone:
Holding Tone:
Conference Tone:
Secure Call Indication Tone:
Feature Invocation Tone:
Distinctive Ring Patterns
Ring1 Cadence: Ring2 Cadence:
Ring3 Cadence: Ring4 Cadence:
Ring5 Cadence: Ring6 Cadence:
Ring7 Cadence: Ring8 Cadence:
Distinctive Call Waiting Tone Patterns
CWT1 Cadence: CWT2 Cadence:
CWT3 Cadence: CWT4 Cadence:
CWT5 Cadence: CWT6 Cadence:
CWT7 Cadence: CWT8 Cadence:
Distinctive Ring/CWT Pattern Names
Ring1 Name: Ring2 Name:
Ring3 Name: Ring4 Name:
Ring5 Name: Ring6 Name:
Ring7 Name: Ring8 Name:
Ring and Call Waiting Tone Spec
Ring Waveform: SinusoidTrapezoid Ring Frequency:
Ring Voltage: CWT Frequency:
Synchronized Ring: yesno
Control Timer Values (sec)
Hook Flash Timer Min: Hook Flash Timer Max:
Callee On Hook Delay: Reorder Delay:
Call Back Expires: Call Back Retry Intvl:
Call Back Delay: VMWI Refresh Intvl:
Interdigit Long Timer: Interdigit Short Timer:
CPC Delay: CPC Duration:
Vertical Service Activation Codes
Call Return Code: Blind Transfer Code:
Call Back Act Code: Call Back Deact Code:
Cfwd All Act Code: Cfwd All Deact Code:
Cfwd Busy Act Code: Cfwd Busy Deact Code:
Cfwd No Ans Act Code: Cfwd No Ans Deact Code:
Cfwd Last Act Code: Cfwd Last Deact Code:
Block Last Act Code: Block Last Deact Code:
Accept Last Act Code: Accept Last Deact Code:
CW Act Code: CW Deact Code:
CW Per Call Act Code: CW Per Call Deact Code:
Block CID Act Code: Block CID Deact Code:
Block CID Per Call Act Code: Block CID Per Call Deact Code:
Block ANC Act Code: Block ANC Deact Code:
DND Act Code: DND Deact Code:
CID Act Code: CID Deact Code:
CWCID Act Code: CWCID Deact Code:
Dist Ring Act Code: Dist Ring Deact Code:
Speed Dial Act Code: Secure All Call Act Code:
Secure No Call Act Code: Secure One Call Act Code:
Secure One Call Deact Code: Conference Act Code:
Attn-Xfer Act Code: Modem Line Toggle Code:
Referral Services Codes:
Feature Dial Services Codes:
Vertical Service Announcement Codes
Service Annc Base Number:
Service Annc Extension Codes:
Outbound Call Codec Selection Codes
Prefer G711u Code: Force G711u Code:
Prefer G711a Code: Force G711a Code:
Prefer G723 Code: Force G723 Code:
Prefer G726r16 Code: Force G726r16 Code:
Prefer G726r24 Code: Force G726r24 Code:
Prefer G726r32 Code: Force G726r32 Code:
Prefer G726r40 Code: Force G726r40 Code:
Prefer G729a Code: Force G729a Code:
Miscellaneous
Set Local Date (mm/dd): Set Local Time (HH/mm):
Time Zone: GMT-12:00GMT-11:00GMT-10:00GMT-09:00GMT-08:00GMT-07:00GMT-06:00GMT-05:00GMT-04:00GMT-03:30GMT-03:00GMT-02:00GMT-01:00GMTGMT+01:00GMT+02:00GMT+03:00GMT+03:30GMT+04:00GMT+05:00GMT+05:30GMT+05:45GMT+06:00GMT+06:30GMT+07:00GMT+08:00GMT+09:00GMT+09:30GMT+10:00GMT+11:00GMT+12:00GMT+13:00 FXS Port Impedance: 600900600+2.16uF900+2.16uF270+750||150nF220+820||120nF220+820||115nF370+620||310nF
Daylight Saving Time Rule:
FXS Port Input Gain: FXS Port Output Gain:
DTMF Playback Level: DTMF Playback Length:
Detect ABCD: yesno Playback ABCD: yesno
Caller ID Method: Bellcore(N.Amer,China)DTMF(Finland,Sweden)DTMF(Denmark)ETSI DTMFETSI DTMF With PRETSI DTMF After RingETSI FSKETSI FSK With PR(UK)DTMF(Denmark) With PR FXS Port Power Limit: 12345678
Caller ID FSK Standard: bell 202v.23 Feature Invocation Method: DefaultSweden
More Echo Suppression: yesno
Line Enable: yesno
Streaming Audio Server (SAS)
SAS Enable: yesno SAS DLG Refresh Intvl:
SAS Inbound RTP Sink:
NAT Settings
NAT Mapping Enable: yesno NAT Keep Alive Enable: yesno
NAT Keep Alive Msg: NAT Keep Alive Dest:
Network Settings
SIP TOS/DiffServ Value: Network Jitter Level: lowmediumhighvery highextremely high
RTP TOS/DiffServ Value: Jitter Buffer Adjustment: up and downup onlydown onlydisable
SIP Settings
SIP Port: SIP 100REL Enable: yesno
EXT SIP Port: Auth Resync-Reboot: yesno
Auth INVITE: yesno Auth MWI: yesno
SIP Proxy-Require: SIP Remote-Party-ID: yesno
SIP GUID: yesno SIP Debug Option: none1-line1-line excl. OPT1-line excl. NTFY1-line excl. REG1-line excl. OPT|NTFY|REGfullfull excl. OPTfull excl. NTFYfull excl. REGfull excl. OPT|NTFY|REG
RTP Log Intvl: Restrict Source IP: yesno
Referor Bye Delay: Refer Target Bye Delay:
Referee Bye Delay: Refer-To Target Contact: yesno
Sticky 183: yesno
Call Feature Settings
Blind Attn-Xfer Enable: yesno MOH Server:
Xfer When Hangup Conf: yesno Conference Bridge URL:
Conference Bridge Ports: 345678910
Proxy and Registration
Proxy: Use Outbound Proxy: yesno
Outbound Proxy: Use OB Proxy In Dialog: yesno
Register: yesno Make Call Without Reg: yesno
Register Expires: Ans Call Without Reg: yesno
Use DNS SRV: yesno DNS SRV Auto Prefix: yesno
Proxy Fallback Intvl: Proxy Redundancy Method: NormalBased on SRV Port
Voice Mail Server: Mailbox Subscribe Expires:
Subscriber Information
Display Name: User ID:
Password: Use Auth ID: yesno
Auth ID:
Mini Certificate:
SRTP Private Key:
Supplementary Service Subscription
Call Waiting Serv: yesno Block CID Serv: yesno
Block ANC Serv: yesno Dist Ring Serv: yesno
Cfwd All Serv: yesno Cfwd Busy Serv: yesno
Cfwd No Ans Serv: yesno Cfwd Sel Serv: yesno
Cfwd Last Serv: yesno Block Last Serv: yesno
Accept Last Serv: yesno DND Serv: yesno
CID Serv: yesno CWCID Serv: yesno
Call Return Serv: yesno Call Back Serv: yesno
Three Way Call Serv: yesno Three Way Conf Serv: yesno
Attn Transfer Serv: yesno Unattn Transfer Serv: yesno
MWI Serv: yesno VMWI Serv: yesno
Speed Dial Serv: yesno Secure Call Serv: yesno
Referral Serv: yesno Feature Dial Serv: yesno
Service Announcement Serv: yesno
Audio Configuration
Preferred Codec: G711uG711aG726-16G726-24G726-32G726-40G729aG723 Silence Supp Enable: yesno
Use Pref Codec Only: yesno Silence Threshold: highmediumlow
G729a Enable: yesno Echo Canc Enable: yesno
G723 Enable: yesno Echo Canc Adapt Enable: yesno
G726-16 Enable: yesno Echo Supp Enable: yesno
G726-24 Enable: yesno FAX CED Detect Enable: yesno
G726-32 Enable: yesno FAX CNG Detect Enable: yesno
G726-40 Enable: yesno FAX Passthru Codec: G711uG711a
DTMF Process INFO: yesno FAX Codec Symmetric: yesno
DTMF Process AVT: yesno FAX Passthru Method: NoneNSEReINVITE
DTMF Tx Method: InBandAVTINFOAuto DTMF Tx Mode: NormalStrict
FAX Process NSE: yesno Hook Flash Tx Method: NoneAVTINFO
FAX Disable ECAN: yesno Release Unused Codec: yesno
Dial Plan
Dial Plan:
Enable IP Dialing: yesno Emergency Number:
FXS Port Polarity Configuration
Idle Polarity: ForwardReverse Caller Conn Polarity: ForwardReverse
Callee Conn Polarity: ForwardReverse
Line Enable: yesno
Streaming Audio Server (SAS)
SAS Enable: yesno SAS DLG Refresh Intvl:
SAS Inbound RTP Sink:
NAT Settings
NAT Mapping Enable: yesno NAT Keep Alive Enable: yesno
NAT Keep Alive Msg: NAT Keep Alive Dest:
Network Settings
SIP TOS/DiffServ Value: Network Jitter Level: lowmediumhighvery highextremely high
RTP TOS/DiffServ Value: Jitter Buffer Adjustment: up and downup onlydown onlydisable
SIP Settings
SIP Port: SIP 100REL Enable: yesno
EXT SIP Port: Auth Resync-Reboot: yesno
Auth INVITE: yesno Auth MWI: yesno
SIP Proxy-Require: SIP Remote-Party-ID: yesno
SIP GUID: yesno SIP Debug Option: none1-line1-line excl. OPT1-line excl. NTFY1-line excl. REG1-line excl. OPT|NTFY|REGfullfull excl. OPTfull excl. NTFYfull excl. REGfull excl. OPT|NTFY|REG
RTP Log Intvl: Restrict Source IP: yesno
Referor Bye Delay: Refer Target Bye Delay:
Referee Bye Delay: Refer-To Target Contact: yesno
Sticky 183: yesno
Call Feature Settings
Blind Attn-Xfer Enable: yesno MOH Server:
Xfer When Hangup Conf: yesno Conference Bridge URL:
Conference Bridge Ports: 345678910
Proxy and Registration
Proxy: Use Outbound Proxy: yesno
Outbound Proxy: Use OB Proxy In Dialog: yesno
Register: yesno Make Call Without Reg: yesno
Register Expires: Ans Call Without Reg: yesno
Use DNS SRV: yesno DNS SRV Auto Prefix: yesno
Proxy Fallback Intvl: Proxy Redundancy Method: NormalBased on SRV Port
Voice Mail Server: Mailbox Subscribe Expires:
Subscriber Information
Display Name: User ID:
Password: Use Auth ID: yesno
Auth ID:
Mini Certificate:
SRTP Private Key:
Supplementary Service Subscription
Call Waiting Serv: yesno Block CID Serv: yesno
Block ANC Serv: yesno Dist Ring Serv: yesno
Cfwd All Serv: yesno Cfwd Busy Serv: yesno
Cfwd No Ans Serv: yesno Cfwd Sel Serv: yesno
Cfwd Last Serv: yesno Block Last Serv: yesno
Accept Last Serv: yesno DND Serv: yesno
CID Serv: yesno CWCID Serv: yesno
Call Return Serv: yesno Call Back Serv: yesno
Three Way Call Serv: yesno Three Way Conf Serv: yesno
Attn Transfer Serv: yesno Unattn Transfer Serv: yesno
MWI Serv: yesno VMWI Serv: yesno
Speed Dial Serv: yesno Secure Call Serv: yesno
Referral Serv: yesno Feature Dial Serv: yesno
Service Announcement Serv: yesno
Audio Configuration
Preferred Codec: G711uG711aG726-16G726-24G726-32G726-40G729aG723 Silence Supp Enable: yesno
Use Pref Codec Only: yesno Silence Threshold: highmediumlow
G729a Enable: yesno Echo Canc Enable: yesno
G723 Enable: yesno Echo Canc Adapt Enable: yesno
G726-16 Enable: yesno Echo Supp Enable: yesno
G726-24 Enable: yesno FAX CED Detect Enable: yesno
G726-32 Enable: yesno FAX CNG Detect Enable: yesno
G726-40 Enable: yesno FAX Passthru Codec: G711uG711a
DTMF Process INFO: yesno FAX Codec Symmetric: yesno
DTMF Process AVT: yesno FAX Passthru Method: NoneNSEReINVITE
DTMF Tx Method: InBandAVTINFOAuto DTMF Tx Mode: NormalStrict
FAX Process NSE: yesno Hook Flash Tx Method: NoneAVTINFO
FAX Disable ECAN: yesno Release Unused Codec: yesno
Dial Plan
Dial Plan:
Enable IP Dialing: yesno Emergency Number:
FXS Port Polarity Configuration
Idle Polarity: ForwardReverse Caller Conn Polarity: ForwardReverse
Callee Conn Polarity: ForwardReverse
Call Forward Settings
Cfwd All Dest: Cfwd Busy Dest:
Cfwd No Ans Dest: Cfwd No Ans Delay:
Selective Call Forward Settings
Cfwd Sel1 Caller: Cfwd Sel1 Dest:
Cfwd Sel2 Caller: Cfwd Sel2 Dest:
Cfwd Sel3 Caller: Cfwd Sel3 Dest:
Cfwd Sel4 Caller: Cfwd Sel4 Dest:
Cfwd Sel5 Caller: Cfwd Sel5 Dest:
Cfwd Sel6 Caller: Cfwd Sel6 Dest:
Cfwd Sel7 Caller: Cfwd Sel7 Dest:
Cfwd Sel8 Caller: Cfwd Sel8 Dest:
Cfwd Last Caller: Cfwd Last Dest:
Block Last Caller: Accept Last Caller:
Speed Dial Settings
Speed Dial 2: Speed Dial 3:
Speed Dial 4: Speed Dial 5:
Speed Dial 6: Speed Dial 7:
Speed Dial 8: Speed Dial 9:
Supplementary Service Settings
CW Setting: yesno Block CID Setting: yesno
Block ANC Setting: yesno DND Setting: yesno
CID Setting: yesno CWCID Setting: yesno
Dist Ring Setting: yesno Secure Call Setting: yesno
Message Waiting: yesno DND Activated: yesno
Distinctive Ring Settings
Ring1 Caller: Ring2 Caller:
Ring3 Caller: Ring4 Caller:
Ring5 Caller: Ring6 Caller:
Ring7 Caller: Ring8 Caller:
Ring Settings
Default Ring: 12345678 Default CWT: 12345678
Hold Reminder Ring: 12345678none Call Back Ring: 12345678
Cfwd Ring Splash Len: Cblk Ring Splash Len:
VMWI Ring Splash Len:
VMWI Ring Policy: New VM AvailableNew VM Becomes AvailableNew VM Arrives
Ring On No New VM: yesno
Call Forward Settings
Cfwd All Dest: Cfwd Busy Dest:
Cfwd No Ans Dest: Cfwd No Ans Delay:
Selective Call Forward Settings
Cfwd Sel1 Caller: Cfwd Sel1 Dest:
Cfwd Sel2 Caller: Cfwd Sel2 Dest:
Cfwd Sel3 Caller: Cfwd Sel3 Dest:
Cfwd Sel4 Caller: Cfwd Sel4 Dest:
Cfwd Sel5 Caller: Cfwd Sel5 Dest:
Cfwd Sel6 Caller: Cfwd Sel6 Dest:
Cfwd Sel7 Caller: Cfwd Sel7 Dest:
Cfwd Sel8 Caller: Cfwd Sel8 Dest:
Cfwd Last Caller: Cfwd Last Dest:
Block Last Caller: Accept Last Caller:
Speed Dial Settings
Speed Dial 2: Speed Dial 3:
Speed Dial 4: Speed Dial 5:
Speed Dial 6: Speed Dial 7:
Speed Dial 8: Speed Dial 9:
Supplementary Service Settings
CW Setting: yesno Block CID Setting: yesno
Block ANC Setting: yesno DND Setting: yesno
CID Setting: yesno CWCID Setting: yesno
Dist Ring Setting: yesno Secure Call Setting: yesno
Message Waiting: yesno DND Activated: yesno
Distinctive Ring Settings
Ring1 Caller: Ring2 Caller:
Ring3 Caller: Ring4 Caller:
Ring5 Caller: Ring6 Caller:
Ring7 Caller: Ring8 Caller:
Ring Settings
Default Ring: 12345678 Default CWT: 12345678
Hold Reminder Ring: 12345678none Call Back Ring: 12345678
Cfwd Ring Splash Len: Cblk Ring Splash Len:
VMWI Ring Splash Len:
VMWI Ring Policy: New VM AvailableNew VM Becomes AvailableNew VM Arrives
Ring On No New VM: yesno