ATA/MJMD5 dead yet?

synchron · Post by **synchron** » Tue Aug 11, 2009 12:21 pm

Not sure, but are other folks not able to register their ATA with MJMD5 recently? For me, it was working until this morning. My internet connection went dead and I had to reset the router. When the internet came back, my ATA was unregistered and after starting/stopping MJMD5 a few times, ATA won't register even though it's pointing to the proxy (192.168.1.111:5070 in my case). I'm back to the dongle for now (of course it "lucky You'd" me and I'm on the 8/1 version.)

For me, it appears that the secret un/pw credentials that we can't sniff out for now has effected my MJ account, but I'm wondering..... is this a fluke?

Synchron

razavi66 · Post by **razavi66** » Tue Aug 11, 2009 1:02 pm

Hi,

I had same problem, but these step solve it:

1- Stop MJMD5 & Close it. (check in Task manager, it must fully terminate)
2- Turn your ATA off (Unplug Power)
2- Restart your router.
3- Restart your Computer.
4- Run MJMD5
5- Turn on your ATA.(Plug the power)
6- Now it must work again.
7- Do not change any setting in your ATA, Router and MJMD5, if you made changes, Undo it to the setting that you have all working.

craigm1 · Post by **craigm1** » Tue Aug 11, 2009 2:29 pm

Have 4 computers running and 4 lines with 2 pap2 Last week they seem to do down once a day just need to start and stop mdmd5 a few times and wait it will kick back on wonder what's going on still much better than using dongle

craig

UncleRunkle · Post by **UncleRunkle** » Tue Aug 11, 2009 7:03 pm

Try setting the register expires value lower to say 120 and see if that helps...

craigm1 · Post by **craigm1** » Tue Aug 11, 2009 7:54 pm

Set the value to 60 good so far

degarb · Post by **degarb** » Mon Aug 17, 2009 1:56 pm

What are you talking about? Can someone rewind?

I would love to use MJ without computer but don't know how.

Orgymang · Post by **Orgymang** » Tue Aug 18, 2009 11:42 pm

Would it be worthwhile for me to purchase an ATA to use with MJ? What are the chances they are going to find a way to disable service for those using ATA's again?

Matt9876 · Post by **Matt9876** » Wed Aug 19, 2009 11:04 am

Orgymang wrote: What are the chances they are going to find a way to disable service for those using ATA's again?

Very high probability they will make changes to shut down ATAs now that they have started down that road.

It takes serious skills to setup an ATA to use MJMD5,I'll just stick with the dongle & little computer and forgo all the misery the update cycles are going to cause.

synchron · Post by **synchron** » Wed Aug 19, 2009 1:41 pm

Well, since the 8/1 update, I used the passwordfinder2.1 DOS tool from http://www.magicjackhacks.com only to discover that it's the same pw.

I entered it again in ATA, ran the proxy, and it works again. But it does wink out every now & then which will drive my family nuts when I'm gone so for now, I've gone the ATA/G5/GV/SS route(no PC required after setting it up) which has been holding steady for several days now (knock on wood!).

Synchron

degarb · Post by **degarb** » Wed Aug 19, 2009 9:05 pm

Where do you buy these atas? Brick and mortors have them?

desidude2000 · Post by **desidude2000** » Thu Aug 20, 2009 12:15 pm

fyi, i'm still going strong here with mjproxy but it might be because i haven't stop or restarted it since july 01.

Code: Select all

root     15350     1  0 Jul01 ?        00:02:43 mjproxy 0.0.0.0 5070 proxy01.losangeles.talk4free.com 5070 XXXXXXXXXXXXXXXXXXXX

craigm1 · Post by **craigm1** » Thu Aug 20, 2009 2:36 pm

http://www.ipphone-warehouse.com/Produc ... Code=pap2t

$47.99 and it's the real deal look for na that means it was shipped from linksys unlocked not a used pap2 that was unlocked

Craig

magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

ATA/MJMD5 dead yet?

ATA/MJMD5 dead yet?

RE: ATA/MJMD5 dead yet?

MJMD5 & pap2

thanks

pap2