Magicjack on HP Compaq T5510 Thin Client PC 800MHz 32/128

Discuss magicJack running on Thin Clients

Moderators: Bill Smith, Pilot

Post Reply
trips11
MagicJack Newbie
Posts: 4
Joined: Tue Jun 02, 2009 1:19 am

Magicjack on HP Compaq T5510 Thin Client PC 800MHz 32/128

Post by trips11 »

Hi All,

I have HP Compaq T5510 Thin Client PC 800MHz 32/128 and want to run magicjack on that.
Could any one help me how can I run MJ on that.

I tried to see all the posts but couldnt find much on that.

Thanks,
manasota
MagicJack User
Posts: 49
Joined: Sat May 02, 2009 11:38 am

Post by manasota »

I don't think that unit is up to the task.
Alpman
Dan isn't smart enough to hire me
Posts: 260
Joined: Wed Sep 03, 2008 6:14 am
Location: Sierra Nevada Foothills - Frogtown, Ca
Contact:

Post by Alpman »

Actually, the 5510/5520 will work, but you'll have to make some significant hardware and software changes.
The limiting factor is the memory. 128mb is soldered to the M/B and there are no available slots to ugrade.
You will also have to replace the DOM with a MicroDrive and a CF adapter. Then you will have to load Stroth's image as the HP image won't load on the larger MicroDrive.
Then you need to disable EWF and enable the PageFile w/ at least 256mb. This is the key to making it work w/ just 128 memory. Otherwise your RAM Drive will run out of memory and crash the machine.
However, this also becomes an issue as Windows only sees the MicroDrive as a removable drive and will not create a PageFile on a removable drive (pagefile creation error at startup, creates temp pagefile after selecting OK on error, repeats error on restart).
You will have to edit and install the MicroDrive filter driver (search Google) in order for windows to see it as a fixed drive first.
The nice thing is that you'll never have to worry about disk writes killing your DOM and you'll never have to commit any changes, so all MJ updates will save automatically.
Hope this helps.
Post Reply