Copy system Image

gcadman · Post by **gcadman** » Fri Oct 09, 2009 3:46 pm

I have Neoware E90 1mb/512md system, can i copy the system image and load it onto another unit ( with the same specs)

If so what software and process would i need ?

Thanks
Gcad

gcadman · Post by **gcadman** » Sun Oct 11, 2009 11:50 am

is there now way. ?

gcadman wrote:I have Neoware E90 1mb/512md system, can i copy the system image and load it onto another unit ( with the same specs)

If so what software and process would i need ?

Thanks
Gcad

STxFarmer · Post by **STxFarmer** » Sun Oct 11, 2009 3:26 pm

You need to use your search function, I posted this two months ago. Download it and you can use the Neoware software to copy your image and flash it to the new unit.

http://rapidshare.com/files/264904249/B ... v2.2.2.rar

gcadman · Post by **gcadman** » Sun Oct 11, 2009 8:23 pm

Thanks StxFarmer,

I did read that post and did not know if wold work for my setup as it was for the 256mb system

I will need to download the correct version from the noeware (hp) site correct ?

Thanks Again
Gcad

STxFarmer wrote:You need to use your search function, I posted this two months ago. Download it and you can use the Neoware software to copy your image and flash it to the new unit.

http://rapidshare.com/files/264904249/B ... v2.2.2.rar

STxFarmer · Post by **STxFarmer** » Tue Oct 13, 2009 10:06 am

If you are happy with the image you have on your current machine and the flash is the same size on both you can copy from one unit and flash the other. The only way you can use the image from HP for the Neoware is to use ezRemote and flash the unit over your lan. Neoware is much easier if you have a working image of the correct size and use the USB software to flash you new unit.

magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

Copy system Image

Copy system Image

Re: Copy system Image