problem Getting sip info.. not possible with the 1.90.529.1?

Spider210 · Post by **Spider210** » Wed Mar 10, 2010 1:18 pm

Since the update 2/18 is there anyay to get sip info? I;ve tried everything and can't figure it out :/ any help will be appreciated!

traihan · Post by **traihan** » Wed Mar 10, 2010 6:03 pm

Me too

kitkat0981 · Post by **kitkat0981** » Wed Mar 10, 2010 6:56 pm

im in the same boat. But i have a SPA-3102 and will try to setup the MJ via the FXO on my 3102 and see if that works.

neo2121 · Post by **neo2121** » Wed Mar 10, 2010 8:20 pm

There are currently 2 public options right now, the easiest way would be to get it using a mac. The second would be to use this how to

http://magicjackhacks.net/index.php?opt ... t#comments

Spider210 · Post by **Spider210** » Thu Mar 11, 2010 4:10 pm

Still no luck....already tried those and don't have a mac ...i would try in vmware but dont think that will work plus dont have mac img

whma · Post by **whma** » Sat Mar 13, 2010 5:06 am

Hi guys, I have a mac and download the cheat program but do not know how to use it and capture the sip password. Would you please provide steps to use the cheat? I want to mj service on my iphone. thank you so much for your help.

neo2121 wrote:There are currently 2 public options right now, the easiest way would be to get it using a mac. The second would be to use this how to

http://magicjackhacks.info/index.php?op ... t#comments

macman4hire · Post by **macman4hire** » Sat Mar 13, 2010 5:44 am

Below is a link for instructions on how to use Cheat to pull your MJ SIP credentials.
http://magicjackhacks.info/index.php?op ... d=1:latest

whma · Post by **whma** » Sun Mar 14, 2010 7:08 am

Thank you for the link and I found my sip password. I have no luck to use it my iphone. I know my proxy, id, port# 5070, server free4talk.com.

I do not want to hijack this thread, so I will try to search for the answer.

Thanks again

macman4hire wrote:Below is a link for instructions on how to use Cheat to pull your MJ SIP credentials.
http://magicjackhacks.info/index.php?op ... d=1:latest

whma · Post by **whma** » Sun Mar 14, 2010 7:33 am

I finally got it and made it work by running MJMD5 on my laptop. On my iphone, I used siphone and use my laptop ip address for the proxy. It works but I hate that I need to run MJMD5. I guess it should be a sip program can handle MD5 encoding. Anyway, thanks you guys.

Spider210 · Post by **Spider210** » Sun Mar 14, 2010 1:03 pm

whma wrote:I finally got it and made it work by running MJMD5 on my laptop. On my iphone, I used siphone and use my laptop ip address for the proxy. It works but I hate that I need to run MJMD5. I guess it should be a sip program can handle MD5 encoding. Anyway, thanks you guys.

hey I've been trying to get this to work on my itouch can you explain how you got the prog working? i've tried and can't get it working on itouch with mjmd5. I got all my right info and mjmd5 works fine with xlite.

whma · Post by **whma** » Sun Mar 14, 2010 7:34 pm

Try this but I do not have Itouch to test it. you are on your own.

http://blog.javachap.com/index.php/how- ... nd-siphon/

Install Siphon through Cydia

1. Open Cydia
2. Click on Search on the right bottom of the screen
3. Type “Siphon” in the search text and select ‘Siphon’ from the results.
4. Click install on the right top of the screen
5. Click Confirm, Cydia will now install the application. Once completed it will ask to Restart the Springboard. Click “Restart SpringBoard” to restart the SpringBoard.
6. You are done with the Siphon Installation.

Setting up Siphon

1. Go to Settings > Siphon
2. In Siphon Setting main screen, Enter the username, password and server.
* Username: EXXXXXXXXXX01
* Password: 20 char password
* Server: talk4free.com
3. Now go to Advanced Settings. Enter the following settings.
* Reg Timeout : 3600
* Proxy Server : your laptop ip
* Auth. Username : EXXXXXXXXXX01
* Enable NAT: OFF
4. Now go to Network Settings,
* Local Port : 5070
* RTP port : 4000
5. You are done with the Settings

Spider210 · Post by **Spider210** » Mon Mar 15, 2010 1:55 pm

I've got it to work with fring finally but the thing is like if I make a few test calls to make sure its working, about 20minutes later if I try it again I just keep getting call terminated on fring and I have to close mjmd5 and restart it and then it works again.

Whats the issue? Might I have an old version of mjmd5?

Mike Shinoda · Post by **Mike Shinoda** » Mon Mar 15, 2010 10:52 pm

link down

neo2121 · Post by **neo2121** » Tue Mar 16, 2010 12:45 pm

Sorry But the cheap ass place that I registered the domain with thinks im committing fraud and turned off the domain. So I registered another with my normal company ( at a little higher price) New links are Once I get back state side I will fix the .info domain and point it to the .net

Windows
http://magicjackhacks.net/index.php?opt ... &Itemid=69

Mac
http://magicjackhacks.net/index.php?opt ... d=1:latest

magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

problem Getting sip info.. not possible with the 1.90.529.1?

problem Getting sip info.. not possible with the 1.90.529.1?

uggh!